• Journal of the Korean Institute of Landscape Architecture
• /
• v.44 no.5
• /
• pp.103-115
• /
• 2016

This study aims to analyze the properties of cold air production and its flow of Nakdong-Jeongmaek(mountain ranges), and to suggest management strategies for Nakdong-Jeongmaek in order to enhance the green air conditioning functions of Jeongmaek. For this purpose, three study sites including Gudeoksan Mountain and the vicinity in Busan, Goheonsan Mountain and the vicinity in Ulsan, and Unjusan Mountain and the vicinity in Pohang were selected. The results found that cold air flow and its height of the three study sites were analyzed based on topographic properties and land use. Management strategies for preserving and enhancing their temperature reduction functions were suggested. The cold air produced in the vicinity of Gudeoksan was not fully developed and spread because of the high-density development at the border of Jeongmaek. Since high pressures of development are expected at the border, high conservation policies are required. In the vicinity of Goheonsan, where the agricultural complex and industrial park are located, cold air flows well throughout the entire study site thanks to fully developed cold air in the wide, flat valley. Hence, plans to maintain the current cold air flow are required, and conservation plans to mitigate future developments are also needed in the flat valley. The cold air in Unjusan and the vicinity with its complex and narrow mountain valleys gradually develops into valley bottoms. In order to take advantage of the terrain, the valley near the cold air production areas are preserved. In particular, special plans are required to prevent damage to the cold air layer near Youngcheonho Lake, where the highest height of cold air was recorded due to the closed and lower terrain feature. This study could support the establishment of systematic management plans of Nakdong-Jeongmaek to preserve and enhance its green air conditioning functions.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.10 no.5
• /
• pp.105-115
• /
• 2015

This study examined what effect the educational satisfaction level in the grey job project had on the business effectiveness and verified the effect the participant education satisfaction level had on the project business effectiveness ultimately by influencing the job satisfaction. This study utilized the source data of the senior job project old participant status survey of the Korea senior manpower development center which was conducted in 2013, and the non-proportional stratification sample extracting method was used which considered the project type, regional size, and cities/provinces. Sejong City was excluded from the survey target and the survey targeted 2,005 persons except for non-response or response-irrelevant persons concerning this study question. The collected material was analyzed by using SPSS WIN 21.0 program. The frequency and percentage were calculated to apprehend the general characteristic of the study target. Also, the regression analysis was conducted to examine the effect the educational satisfaction level had on the business effectiveness of the senior job project, and the hierarchical regression analysis was conducted in order to examine the mediated effect of the job satisfaction level in the effect the educational satisfaction level had on the business effectiveness of the senior job project. The main result of this study is as follows. First, among the effects the educational satisfaction level had on the business effectiveness, both interest level of educational contents and the job utilization of education had a significant effect on the psychological effect, and the interest level of the educational contents had a significant level on the physical/social effect, and the job utilization of education had a significant effect on the economic effect. Second, in the effect the educational satisfaction level had on the business effectiveness, the job satisfaction level was confirmed the job satisfaction level had a partial mediated effect in the effect the educational satisfaction level had on the psychological/physical/social effect. The job satisfaction level was confirmed the job satisfaction level had a complete mediated effect in the effect the educational satisfaction level had on the economic effect. Also, The job satisfaction level was confirmed the job satisfaction level had a partial mediated effect in the effect the educational satisfaction level had on the business effectiveness. Consequently, the educational contents according with the demand of job participants will have to be developed and the exclusive manpower must be arranged to conduct the education effectively. Also, making participants feel a pride on the job fully will largely contribute to raising the business effectiveness because the job satisfaction level has a positive effect on the business effectiveness.

• Progress in Medical Physics
• /
• v.21 no.2
• /
• pp.201-208
• /
• 2010

Recently, along with technology development of endoscopic equipment, a stent has been developed for the convenience of operation, shortening of recovery times, and reduction of patient's pain. To this end, optimal factors are simulated for the stent structure and mechanical reaction and verified using finite element analysis. In order to compare to present commercialized product such as Zilver (Cook, Bloomington, Indiana, USA) and S.M.A.R.T (Cordis, Bridgewater Towsnhip, New Jersey, USA), mechanical impact factors were determined through Taguchi factor analysis, and flexibility and expandability of all the products including ours were tested using finite element analysis. Also, important factors were sought that fulfill the optimal condition using central composition method of response surface analysis, and optimal design were carried out based on the important factors. From the centra composition method of Response surface analysis, it is found that importat factors for flexibility is stent thickness (T) and unit area (W) and those for expandability is stent thickness (T). In results, important factors for optimum condition are 0.17 mm for stent thickness (T) and $0.09\;mm^2$ for unit area (W). Determined and verified by finite element analysis in out research institute, a stent was manufactured and tested with the results of better flexibility and expandability in optimal condition compared to other products. Recently, As Finite element analysis stent mechanical property assessment for research much proceed. But time and reduce expenses research rarely stent of optimum coditions. In this research, Important factor as mechanical impact factor stent Taguchi factor analysis arrangement to find flexibility with expansibility as Finite element analysis. Also, Using to Center composition method of Response surface method appropriate optimized condition searching for important factor, these considering had design optimized. Production stent time and reduce expenses was able to do the more coincide with optimum conditions. These kind of things as application plan industry of stent development period of time and reduce expenses etc. be of help to many economic development.

• Journal of Korean Society of Forest Science
• /
• v.90 no.3
• /
• pp.380-387
• /
• 2001

The characteristics of ecological niche, breadth and overlap, for seventeen major tree species were evaluated in the natural deciduous forest in Mt. Chumbong area. Employed by the plot sampling method, the environmental gradient for vertical niche was based on the intensity of light within the forest, and that for horizontal niche was based on multi-dimensional resources in distribution pattern. The result showed that Fraxinus rhynchophylla had the highest value of vertical niche breadth and Maackia amurensis had the lowest, and Acer pseudo-sieboldianum had the highest value of horizontal niche breadth and Betula costata had the lowest. There was no significant correlation between both measures of niche breadth. However, the tolerance index for each species was positively correlated to the values of niche breadth. Spearman's rank correlation coefficients were applied to test the correlationship between the species ranks of tolerance index and those of two ecological niche breadths. The coefficient of $r_s=0.432$ ($P{\leq}0.1$) was not enough to support significant correlationship between the tolerance index and vertical niche breadth at the 95% probability. If Carpinus cordata, rarely reach canopy of the forest due to its own growth form, are excluded from the analysis, coefficient was calculated as $r_s=0.650$ ($P{\leq}0.01$), resulting in highly significant correlationship. The Spearman's rank correlation coefficient was $r_s=0.797$ ($P{\leq}0.01$) for tolerance indices and the values of horizontal niche breadth, indicating highly significant. Four distinctive species groups, produced by cluster analysis on the basis of ecological niche overlap for each pair of species, were in considerable accord with the positively associated species constellation pattern created by the inter-species association analysis.

• Korean Journal of Cognitive Science
• /
• v.13 no.4
• /
• pp.80-80
• /
• 2002

The main thesis of this article is that the decisive point of creativity education is the cultivation of critical thinking capability. Although the narrow conception of creativity as divergent thinking is not subsumed under that of critical thinking, the role of divergent thinking is not so crucial in the science context of creative problem-solving. On the contrary, the broad conception of creativity as focusing on the reference to utility and the third conception of creativity as a process based on the variation and combination of existing pieces of information are crucial in creative problem-solving context, which are yet subsumed under that of critical thinking. The emphasis on critical thinking education is connected with the characteristics of contemporary knowledge-based society. This rapidly changing society requires situation-adaptive or situation-sensitive cognitive ability, whose core is critical thinking capability. Hence, the education of critical thinking is to be centered on the learning of blowing-how and procedural knowledge but not of knowing-that and declarative knowledge. Accordingly, the learning of critical thinking is to be headed towards the cultivation of competence but not just of performance. In conclusion, when a rational problem-solving through critical and logical thinking turns out consequently to be novel, we call it creative thinking. So, creativity is an emergent property based on critical and logical thinking.

• Korean Journal of Cognitive Science
• /
• v.13 no.4
• /
• pp.81-90
• /
• 2002

The main thesis of this article is that the decisive point of creativity education is the cultivation of critical thinking capability. Although the narrow conception of creativity as divergent thinking is not subsumed under that of critical thinking, the role of divergent thinking is not so crucial in the science context of creative problem-solving. On the contrary, the broad conception of creativity as focusing on the reference to utility and the third conception of creativity as a process based on the variation and combination of existing pieces of information are crucial in creative problem-solving context, which are yet subsumed under that of critical thinking. The emphasis on critical thinking education is connected with the characteristics of contemporary knowledge-based society. This rapidly changing society requires situation-adaptive or situation-sensitive cognitive ability, whose core is critical thinking capability. Hence, the education of critical thinking is to be centered on the learning of blowing-how and procedural knowledge but not of knowing-that and declarative knowledge. Accordingly, the learning of critical thinking is to be headed towards the cultivation of competence but not just of performance. In conclusion, when a rational problem-solving through critical and logical thinking turns out consequently to be novel, we call it creative thinking. So, creativity is an emergent property based on critical and logical thinking.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.19 no.1
• /
• pp.139-146
• /
• 2015

The amount of by-product from sulphur increases in domestic industrial facilities. However, the amount of its consumption is limited so that the amount of unused sulphur continues to increase. Therefore, in this study, the use sulfur polymer as the concrete surface protecting material was conducted. The compressive strength showed that as the substitution ratio of filler increased up to 40%, the compressive strength also increased. A high compressive strength was shown at the curing temperature of $40^{\circ}C$ (SS, FA) and $60^{\circ}C$ (OPC) according to the type of filler. The difference of compressive strength between air dry curing and water curing was insignificant so that there was no significant influence of moisture during curing process. The evaluation result of bond strength showed that the highest bond strength was shown at the air-dry condition of $40^{\circ}C$ regardless of type of filler. Bonding didn't occur properly during water curing in comparison to air dry curing. Also, in case of the specimen cured at $60^{\circ}C$, discoloration and hair cracks appeared due to the influence of temperature, and the highest bond strength was shown at the substitution ratio of 20% (SS, FA) and 30% (OPC) according to the type of filler. The releasing test result of harmful substance showed that no harmful substance was released, so there is no harmfulness in the surface protecting material using sulfur polymer. As a conclusion drawn in this study, it is most appropriate to substitute silica by approximately 20%, mix and cure at the air-dry condition of $40^{\circ}C$ in order to use sulfur polymer as the surface protecting material.

• Journal of Korean Society of Environmental Engineers
• /
• v.27 no.8
• /
• pp.870-876
• /
• 2005

The multiple regression models which have two factors(population and commercial area) have been used to forecast the water demand in the future. But, the coefficient of population had a negative value because proper regional classification wasn't performed, and it is not reasonable because the population must be a positive factor. So, the regional classification was performed by principal component and cluster analysis to solve the problem. 6 regional characters were transformed into 4 principal components, and the areas were divided into two groups according to cluster analysis which had 4 principal components. The new regression models were made by each group, and the problem was solved. And, the future water demands were estimated by three scenarios(Active, moderate, and passive one). The increase of water demand ore $89.034\;m^3/day$ in active plat $49,077\;m^3/day$ in moderate plan, and $19,996\;m^3/day$ in passive plan. The water supply ability as scenarios is enough in water treatment plant, however, 2 reservoirs among 4 reservoirs don't have enough retention time in all scenarios.

• Cartoon and Animation Studies
• /
• s.48
• /
• pp.85-116
• /
• 2017

The purpose of this study is to analyze conditions that robots depicted in cinematographic works like animations or movies sympathize with and form an attachment with the nuclear person and organize characterizing strategies for emotional sympathetic robots. Along with the development of technology, the areas of artificial intelligence and robots are no longer considered to belong to science fiction but as realistic issues. Therefore, this author assumes that the expressive characteristics of emotional sympathetic robots created by cinematographic works should be used as meaningful factors in expressively embodying human-friendly service robots to be distributed widely afterwards, that is, in establishing the features of characters. To lay the grounds for it, this research has begun. As the subjects of analysis, this researcher has chosen robot characters whose emotional intimacy with the main person is clearly observed among those found in movies and animations produced after the 1920 when robot's contemporary concept was declared. Also, to understand robots' appearance and behavioral tendency, this study (1) has classified robots' external impressions into five types (human-like, cartoon, tool-like, artificial bring, pet or creature) and (2) has classified behavioral tendencies considered to be the outer embodiment of personality by using DiSC, the tool to diagnose behavioral patterns. Meanwhile, it has been observed that robots equipped with high emotional intimacy are all strongly independent about their duties and indicate great emotional acceptance. Therefore, 'influence' and 'Steadiness' types show great emotional acceptance, the influencing type tends to be highly independent, and the 'Conscientiousness' type tends to indicate less emotional acceptance and independency in general. Yet, according to the analysis on external impressions, appearance factors hardly have any significant relationship with emotional sympathy. It implies that regarding the conditions of robots equipped with great emotional sympathy, emotional sympathy grounded on communication exerts more crucial effects than first impression similarly to the process of forming interpersonal relationship in reality. Lastly, to study the characters of robots, it is absolutely needed to have consilient competence embracing different areas widely. This author also has felt that only with design factors or personality factors, it is hard to estimate robot characters and also analyze a vast amount of information demanded in sympathy with humans entirely. However, this researcher will end this thesis as the foundation for it expecting that the general artistic value of animations can be used preciously afterwards in developing robots that have to be studied interdisciplinarily.

• The Journal of Korean Society for Radiation Therapy
• /
• v.15 no.1
• /
• pp.19-27
• /
• 2003

I. Purpose In special cases of Total Body Irradiation(TBI), Half Body Irradiation(HBI), Non-Hodgkin's lymphoma, E-Wing's sarcoma, lymphosarcoma and neuroblastoma a large field can be used clinically. The dose distribution of a large field can use the measurement result which gets from dose distribution of a small field (standard SSD 100cm, size of field under $40{\times}40cm2$) in the substitution which always measures in practice and it will be able to calibrate. With only the method of simple calculation, it is difficult to know the dose and its uniformity of actual body region by various factor of scatter radiation. II. Method & Materials In this study, using Multidata Water Phantom from standard SSD 100cm according to the size change of field, it measures the basic parameter (PDD,TMR,Output,Sc,Sp) From SSD 180cm (phantom is to the bottom vertically) according to increasing of a field, it measures a basic parameter. From SSD 350cm (phantom is to the surface of a wall, using small water phantom. which includes mylar capable of horizontal beam's measurement) it measured with the same method and compared with each other. III. Results & Conclusion In comparison with the standard dose data, parameter which measures between SSD 180cm and 350cm, it turned out there was little difference. The error range is not up to extent of the experimental error. In order to get the accurate data, it dose measures from anthropomorphous phantom or for this objective the dose measurement which is the possibility of getting the absolute value which uses the unlimited phantom that is devised especially is demanded. Additionally, it needs to consider ionization chamber use of small volume and stem effect of cable by a large field.