• 제목/요약/키워드: 외벽

검색결과 484건 처리시간 0.029초

가공관의 외벽에서 친수성 표면처리가 증발열전달에 미치는 영향 (Effects of Hydrophilic Surface Treatment on Evaporation Heat Transfer at the Outside Wall of Enhanced Tubes)

  • 박노성;황규대;김호영;강병하;정진택
    • 대한기계학회논문집B
    • /
    • 제25권5호
    • /
    • pp.666-672
    • /
    • 2001
  • Experiments have been carried out to investigate the evaporation heat transfer characteristics of various tubes on which hydrophilic surface treatment using plasma was employed. Spiral, corrugated and low-finned tubes were selected as test tubes. The evaporator tubes were bundled to form three rows of tubes connected in series, with each row being 400mm long. The results obtained indicate that hydrophilic treated tubes tested exhibit better evaporation heat transfer performance as compared with untreated tubes. It is found that the high wettability of the surface obtained through hydrophilic treatment induces film flow onto the tubes during the evaporation process, while sessile drops are formed on untreated tubes.

RF Magnetron Sputtering 방법으로 증착한 TiO2 / WO3 박막의 특성

  • 이동욱;김동영;서성보;손선영;양정민;김화민;이종영
    • 한국진공학회:학술대회논문집
    • /
    • 한국진공학회 2011년도 제41회 하계 정기 학술대회 초록집
    • /
    • pp.190-190
    • /
    • 2011
  • 일반적으로 TiO2와 WO3는 광촉매 작용으로 인하여 살균력을 보이며, 친수성으로 인해 자가 세정 능력을 가져 유리 및 건축자재의 표면처리, 전자제품의 마감처리 용도로 많이 사용하고 있다. 현재 Sol-gel, CVD, Sputter, Spin-coating 방법 등으로 많은 연구가 진행되어 오고 있다. 이에 본 실험에서는 박막의 두께를 균일하게 만들 수 있는 RF-magnetron sputtering 방법을 이용하여 표면 경도와 부착력이 우수한 TiO2에 열적 특성과 화학적 특성이 안정한 WO3를 Double Layer 방식으로 증착하여 박막을 제작하였다. 광학적 특성을 알아 본 결과 가시광 영역에서 TiO2 / WO3 Double Layer 박막이 80% 이상의 높은 투과율을 나타내었으며, 박막의 표면을 확인 한 결과 TiO2 / WO3 Double Layer 박막이 더 조밀한 표면을 보였다. 또한 접촉각을 측정을 통하여 TiO2박막보다 TiO2 / WO3 double layer박막이 낮은 접촉각을 나타내었다. 이는 TiO2 표면은 소수성이나 WO3로 인해 광촉매 기능이 향상되어 공기 중의 물 분자가 해리 흡착되면서 친수성이 향상되는 것으로 사료된다. 이러한 박막은 건물의 외벽이나 자동차의 내 외장재 전자기기용 광학 필름에 자가세정, 내반사 코팅소재로 활용 가치가 높을 것으로 예상된다.

  • PDF

고층 공동주택의 세대 내 피난시설의 개발에 관한 연구 (A Study on the Development of Evacuation Equipments for Units in High-rise Apartment)

  • 민세홍;사재천;장영진;이재문;남중오
    • 한국화재소방학회:학술대회논문집
    • /
    • 한국화재소방학회 2011년도 추계학술논문발표회 논문집
    • /
    • pp.183-186
    • /
    • 2011
  • 모든 공동주택에 적용되고 있는 기존의 피난시설은 고층부분에서 사용의 제한, 세대 간 보안 및 사용자의 제약 등으로 실제 현장에 적용하여 사용하는 되는 많은 문제점을 내포하고 있다. 또한, 이와 관련하여 공동주택의 용도 특성상 조기 피난이 이루어지지 못하는 경우가 빈번하여 화재 때문에 세대 내 출구가 폐쇄되고 재해약자가 사용하는데 어려우며, 화염과 복사열로부터 안전을 해결하기에는 현재 공동주택에서 보편적으로 설치되어있는 완강기로 이러한 문제를 해결하기에는 매우 미흡한 실정이다. 이에 본 연구에서는 이러한 문제점을 해결할 피난방법이 적용된 피난시설을 제안하고자 한다. "피난대피시설"은 공동주택 발코니 또는 외벽에 콤팩트(compact)하게 접혀 있다가 화재 시 수동 또는 감지기와 연동해 쉽게 작동되어 대피공간 용도와 유사시 자력으로 피난층까지 피난할 수 있는 구조이다. 또한, 화재실과 접하는 부분은 $1,200^{\circ}C$의 복사열을 차단할 수 있는 단열소재로 구성되며 1차적으로는 화재 장소에서 외부 공간으로 일탈한 후에 2차적으로 아래층으로 사다리를 이용하여 피난할 수 있게 되어 있다. 본 연구개발의 주안점은 화재 시화염과 복사열로부터 공간 일탈을 하여 재실자를 보호할 수 있는 대피공간의 개념과 피난시설에서 피난층으로 피난할 수 있는 적극적인 피난방법을 접목한 것이 피난시설 개발의 핵심이다.

  • PDF

건축용 외장재의 발연특성에 관한 연구 (A Study on Characteristics of Smoke Release for Architectural Surface Material)

  • 박영주;이해평;황미정;양영숙;유재열;이미리
    • 한국화재소방학회:학술대회논문집
    • /
    • 한국화재소방학회 2011년도 추계학술논문발표회 논문집
    • /
    • pp.486-489
    • /
    • 2011
  • 건축물 내 외벽에 주로 사용되는 건축용 자재 중 샌드위치 패널은 양면으로 도장한 철판 사이에 심재로 단열재를 넣어 구성된 합성복합자재이다. 샌드위치 패널의 사용범위는 창고시설 및 공업용 건축 등의 용도로 많이 사용되고 있으며, 최근에는 시공에 따른 이점으로 주택 및 상업용등으로 널리 확대되어 사용되고 있다. 본 연구에서는 화재초기의 연기밀도는 인명 대피 시 시야확보에 있어 중요한 역할을 하기에 현재 국내에서 사용되는 건축용 외장재를 용도별로 선정하여 시간에 따른 연기밀도의 값을 구하고 용도에 따른 화재 연기의 확산 정도를 예측하는데 목적을 두었다.

  • PDF

CWS공법(Buried Wale Continuous Wall System)을 적용한 Up-Up 시공사례 (Field Application of Up-Up Construction Using Buried Wale Continuous Walt System Method)

  • 이정배;임인식;김동현;오보환;하인호;임홍철
    • 한국건축시공학회:학술대회논문집
    • /
    • 한국건축시공학회 2006년도 춘계학술논문 발표대회 제6권1호
    • /
    • pp.1-4
    • /
    • 2006
  • A down construction method is frequently used in these days to reduce popular discontent and to assure sufficient working space at early stage in downtown area. There are two main problems in the existing down construction method. One is a confliction between frame works and excavation works, and the other is a cold joint in retaining wall which is unavoidable due to a sequence of concrete placement and induces a water leakage. Therefore, a new method is needed to overcome these problems. The CWS (buried wale Continuous Wall System) method was developed by authors. By replacing RC perimeter beam with embedded steel wale, the steel frame works of substructure can be simplified and the water leakage can be prevented using continuous retaining wall. Consequently, the improved duality and reduction of construction period can be obtained from CWS method.

  • PDF

건축물 외벽화재시 Flame Trajectory 추정을 위한 실험적 연구 (Experimental Study on Flame Trajectory in Building External Walls Fire)

  • 신이철;박계원;정재군
    • 한국건축시공학회:학술대회논문집
    • /
    • 한국건축시공학회 2016년도 춘계 학술논문 발표대회
    • /
    • pp.79-80
    • /
    • 2016
  • In the event of a fire on the outer walls of an architectural structure, through real scale experiments with the purpose of estimating the Flame Trajectory, the behavior and risks of expanded combustion to an upper architectural compartment of the Fire Plume Ejected from an Opening according to changes in the aspect ratio of the opening were examined. The results showed that the more the heat release rate of the fire source increased, the heat capacity of the Fire Plume Ejected from the Opening also increased, and for the case of heptane when compared with methanol or ethanol, the results showed a trend for a significant amount of unburned gas to remain. The results also showed that the larger the aspect ratio was, the more likely it was for the Flame Trajectory to approach the outer walls and rise up. In each of the experiment conditions, as the flame rose from the lower part of the wall to the upper part of the wall, a steady decrease was shown for the temperature distribution. Also by quantitatively analyzing the amount of unburned gas that remained, a method to estimate the temperature of the Fire Plume Ejected from an Opening for a traverse opening was implemented.

  • PDF

가열된 튜브에서 발생하는 강제 대류열전달 특성에 관한 실험적 연구 (Experimental Investigation on Forced Convective Heat Transfer Characteristic Generated to Heated Tube)

  • 박희호;이양석;김선진
    • 한국추진공학회지
    • /
    • 제10권3호
    • /
    • pp.90-98
    • /
    • 2006
  • 재생냉각 시스템의 냉각제로 사용하는 탄화수소계열 연료인 Jet A-1의 냉각특성과 강제대류 열전달 특성을 파악하기 위해 가열된 직선 튜브를 제작하였다. 냉각제의 입, 출구온도와 튜브의 외벽 온도를 측정하여 강제대류 열전달 특성을 고찰하였다. 결과를 통하여 Jet A-1을 사용한 경우에는 일정 유동조건에 대하여 burnout이 발생하는 최초의 벽 온도를 결정함으로써 냉각제가 수용할 수 있는 최대 열유속을 확인하였다. 냉각제의 유속과 입구온도가 대류열전달 특성에 직접적인 영향을 주는 인자임을 확인하였다.

복토 주택의 외벽면 복토 두께 변화에 따른 열부하 패턴에 관한 연구 (A Study on the Thermal Load Patterns for a Exterior Wall in a House According to a Variation of Earth Sheltering Thickness)

  • 이재혁;최원기;서승직;조동우
    • 대한설비공학회:학술대회논문집
    • /
    • 대한설비공학회 2008년도 하계학술발표대회 논문집
    • /
    • pp.807-812
    • /
    • 2008
  • The various attempts is made to solve the energy and environment problems. In addition, people interested in their life quality want the more eco-friendly living space. So we suggested that the earth-sheltered house could be one of the eco-friendly and low energy consuming houses to meet the social interest. And we also made data for design of the earth-sheltered house to be applicable to climate of Korea. In this study, a simulation was performed to estimate a boundary temperature according to earth sheltering thickness at the earth-sheltered part(exterior wall) in the case of earth sheltering on the plane ground not using a sloped site. And we analyzed the reduction of a thermal load by using this boundary temperature. We also compared a case of earth sheltering at the vertical wall with a case of earth sheltering at the roof to know the thermal reduction effect of a case of earth sheltering at the vertical wall.

  • PDF

수직면 일사량을 고려한 초고층 건축물 적용 Unit형 BIPV 설계 방안에 관한 연구 (A Study on the Unit Type BIPV Design Method for Super-Tall Building Concentrating on the Solar Irradiance Incident on the Building Facades)

  • 류춘덕;서영석;오민석;김회서
    • 한국태양에너지학회:학술대회논문집
    • /
    • 한국태양에너지학회 2011년도 추계학술발표대회 논문집
    • /
    • pp.370-375
    • /
    • 2011
  • BIPV시스템 분야는 다른 PV 적용 기술 분야에 비해 빠르게 성장하고 있으나 소형 건축물 위주로 적용되었으며, 초고층 건축물과 같이 수직적으로 높은 건축물의 외부환경조건에 대응하기 위한 BIPV의 적용 방안은 현재까지 연구되어지지 않았다. 국내의 경우 선진국에 비해 초고층 건축물에 대한 BIPV시스템 적용기술은 아직 초기 연구단계에 불과하다. 초고층 건축물의 고유의 특징을 고려하여 초고층 건축물 파사드에 입사하는 일사량의 분포가 균일하지 않을 것이라고 예측하고 실측을 진행하였으며, 실측 결과의 분석을 통하여 초고층 건축물에서의 BIPV시스템 최적 설계방안을 제시하였다. 결론적으로 본 연구에서는 초고층 건축물의 외벽에 입사하는 일사량을 고려한 Unit형 BIPV설계 방안을 제시하였으며, 특히, 측정된 일사량 데이터를 활용하여 초고층 건축물에 적합한 인버터의 선정의 대안을 제시하였다.

  • PDF

직사각형 휜이 부착된 실린더 블럭의 정상 및 비정상 열전도 해석 (Analysis of the Stedy and Unsteady Heat Conduction in the Cylinder Block Attached with Rectangular Fin)

  • 이건휘;최영돈
    • 대한기계학회논문집
    • /
    • 제14권5호
    • /
    • pp.1254-1263
    • /
    • 1990
  • 본 연구에서는 기관 실린더 사이의 거리와 기관 블럭의 외벽에 부착된 윈이 실린더내벽면 온도분포에 미치는 영향을 알아보기 위하여 2차원 정상.비정상 열전도 해석을 하였다. 물론 2차원 열전도 해석 결과는 전 실린더 블럭에 적용할 수 있는 것은 아니며 블럭의 상단과 하단 부근에서는 적용시키기 어렵고 중간 부근에서만 적용 할수 있는 것이지만, 2차원 해석을 통해서 격자의 수를 대단히 많이 늘일 수 있어서 그해의 정확도를 높힐 수 있기 때문에 실린더 사이의 간격과 휜의 크기 등이 실린더 내벽면 온도에 미치는 영향, 정상.비정상 해석의 차이점 등을 명확히 규명할 수 있는 잇점이 있어서 본 연구에서 채택하였다.따라서 본 해석 결과는 전 실린더에 대해서 국부적으로 적용될 수 있는 것이 아니라 전 실린더에서의 값에 대한 평균 값으로 이해 되어야 할 것이다.