• 제목/요약/키워드: 외벽체

검색결과 50건 처리시간 0.029초

컨테이너 하우스 외벽 구성 시스템 기술개발연구 (A Study on the Technical Development for the Exterior Wall System of Container House)

  • 김환식;백기영
    • 한국산학기술학회논문지
    • /
    • 제2권2호
    • /
    • pp.57-63
    • /
    • 2001
  • 본 연구는 기존 조적조 주택의 주요 구조부에 컨테이너를 활용한 개발 방식 즉, 컨테이너 하우스의 계획, 설계, 시공 가능한 시스템 개발을 목적으로 하였다. 이를 위해, 스틸하우스의 구조 및 시공 방법 등을 분석하였으며 컨테이너 하우스의 외벽 구성 시스템에 대한 견본품 제작을 완성하였다. 이 컨테이너 하우스 견본품을 토대로 두 개의 컨테이너 하우스 케이스 스터디에 적용하였고, 기존 조적조 주택 공법에 비하여 공사비 절감과 공기단축에 있어 현격한 효과가 있음을 확인하였다. 컨테이너하우스의 제작기술 개발 성공을 통해 스틸하우스 시장의 틈새 공략으로 기업체의 기술개발 및 투자방향을 제공하였다는데 의의가 있다.

  • PDF

편복도형 아파트의 복도 외벽체 개구부 형태에 따른 환기성능 및 화재특성에 관한 연구 (A Study on the Ventilation Performance and Fire Characteristics with Different Types of Openings in External Wall of One Side Corridor Type Apartment)

  • 고명진;최두성;도진석
    • KIEAE Journal
    • /
    • 제10권5호
    • /
    • pp.87-93
    • /
    • 2010
  • The objective of this study is to verify the safety in case of fire and change of residential environment for different wall construction approaches in a stairways apartment house. In order to confirm that case_1, which is current case that most of wall is opened and the case 2, which upper part of wall is limitedly opened are compared and analyzed based on simulations of fire, escape and natural ventilation performance. The analysis reveals that possible escape time for case 1 was more than 600 seconds and for case 2 was 195 seconds. Since the escape times for both cases were over 128 seconds, it would be reasonable to assume that every resident would escape. The simulation results on natural ventilation performance shows the air change per hour of case 1 and case 2 were .19n/h and .16n/h and there was 1.2 times difference. However, the difference was too insignificant and it could be seen as that different approaches on wall construction would not significantly influence on natural ventilation performance.

구조용 실링마감재의 내환경 조건에 따른 탄성복원 특성 연구 (A Study on the Elastic Restoration Characteristics According to Environmental Resistance Condition of Structural Sealing Finishing Materials)

  • 장필성;강동원;홍순구;김영근;김성래
    • 한국구조물진단유지관리공학회 논문집
    • /
    • 제22권1호
    • /
    • pp.6-12
    • /
    • 2018
  • 본 최근 건축물 외벽공사에 커튼월 공법의 사용이 증가하고 있다. 외벽 커튼월 공법은 공기단축 및 경제적 효용이 크다는 장점으로 인해 건물의 외벽으로도 널리 시공되고 있다. 그러나, 커튼월 공법의 프레임과 유리를 연결해 주는 구조용 실란트에 대한 내후성 및 구조물의 거동에 대한 열화를 대체한 시험은 KS F 4910 규격에는 부재한 실정으로 안정적인 커튼월 공법 도입과 품질향상을 위해서는 필요한 요소이다. 본 연구에서는 외기환경하에서 거동에 대한 탄성복원력시험을 실시하였다. 구조용 실란트를 대상으로 열에 대한 실링재의 열화를 평가하였다. 국내에서는 구조용 실란트의 가변형 변위거동에 대한 연구는 부족한 실정으로 본 연구에서는 외기 환경에 노출된 열화조건을 대체하여 실험실 조건에서 재현한 결과를 확인하고, 설계에 반영하고자 한다. 본 연구 결과에 따르면, 기존의 구조용 실링재는 KS F 4910의 품질기준은 만족하지만, 본 연구에서 실시한 조건에서는 시험체의 파단과 표면의 균열 등이 발생하는 것을 확인하였다. 특히, 내후성 시험에서는 시험체 모두 불용의 상태를 확인하여 향후, 커튼월 공법에 사용되는 구조용 실링재의 장기적인 내구성능 평가가 필요한 것으로 판단된다. 따라서, 기존의 구조용 실링재가 현장에 적용되기 위해서는 별도의 내구성능 평가를 실시가 요구된다.

전면벽체 강성에 따른 쏘일네일링 벽체의 거동특성에 관한 실험적 고찰 (An Experimental Study of the Soil Nailed Wall Behavior with Front Plate Rigidity)

  • Kim, Hong-Taek;Kang, In-Kyu;Kwon, Young-Ho;Park, Si-Sam;Cho, Yong-Hoon
    • 한국지반공학회논문집
    • /
    • 제18권3호
    • /
    • pp.87-94
    • /
    • 2002
  • 최근 들어 국내에서는 경제적이고 효율적인 지하굴착공법으로 쏘일네일링 벽체와 지하구조물 외벽을 합벽처리하는 사례가 많아지고 있으며, 이같은 지하외벽 일체식 쏘일네일링 공법은 기존의 지보공법과 비교해 볼 때 굴착면적을 최소화하고 시공성을 개선할 수 있는 특징 이 있다. 또한 지하외벽 일체식 쏘일네일링 공법은 지하외벽의 단면 축소와 지하수에 의한 양압력의 영향에도 대처할 수 있는 장점이 있으나 아직까지는 이에 대한 연구가 미흡하여 보수적으로 설계되고 있는 실정이다. 이를 위해 본 연구에서는 실내모형실험을 통해 전면벽체의 강성에 따른 쏘일네일링 보강토체의 거동 및 네일의 두부에 작용하는 인발력을 분석하여 전면벽체의 강성에 따른 쏘일네일링 벽체의 파괴유형을 규명하고 사용상태 및 한계상태에서의 변위양상 및 네일 두부에서의 인장력 분포를 분석하였다. 또한 전면판의 강성이 쏘일네일링 벽테의 전체 안정성에 미치는 영향을 분석하였으며, 향후 전면벽체의 강성에 따른 지반-네일의 상호작용에 대한 모델개발에 필요한 기초적인 자료를 제공하고자 한다.

금산사미륵전 외벽화 보존처리된 벽체의 분석 연구 (A Study on the Analysis of Outside Mural Paintings treated in Maitreya Hall of Geumsan-sa Buddhist Temple, Korea)

  • 한경순;이상진;이화수
    • 보존과학회지
    • /
    • 제26권4호
    • /
    • pp.445-458
    • /
    • 2010
  • 1993년에 해체 및 보존 처리된 금산사미륵전 벽화는 현재 박락과 균열, 박리와 같은 심각한 손상이 진행된 것으로 조사되었다. 금번 분석조사는 향후 진행될 금산사 미륵전 벽화 보존처리를 위하여 과거에 처리된 벽체의 재료적 특성을 파악하기위해 진행되었다. 손상이 가장 심한 남측 벽의 벽체를 대상으로 하였으며 시료는 남측 2층 외벽의 불벽과 포벽화의 마감벽, 중벽, 배면 보강부의에서 박락된 벽체시료를 채취하여 미세구조와 화학성분, 결정상, 그리고 입도분포를 중심으로 분석하였다. 분석결과, 불벽과 포벽의 마감벽은 유사한 풍화토를 사용하였고 중벽 또한 유사한 모래와 풍화토를 사용하였으며 비교적 균일한 크기와 모양의 광물 입자들의 집합체로 구성되어 있으나, 과거 보존처리 과정에서 벽체의 보강을 위해 사용한 아크릴 계열의 경화제의 영향으로 광물 입자들이 응집되어 매우 단단한 응결체 (aggregate)를 형성하고 있는 것으로 확인되었다. 벽체의 배면 1차 보강층과 배면 2차 보강층은 석고($CaSO_4{\cdot}2H_2O$)가 주 결정상인 것으로 분석되었으며, 모래와 점토광물이 소량 함유되어 있는 것으로 판단된다. 향후 보존처리는 부분적으로 경화된 벽체후면에 대한 조치와 1, 2차보강층의 제거가 우선적으로 진행되어야 한다.

LCD 배면광을 위한 무수은 평면방전램프 (Mercury Free Flat Discharge Lamps for LCD Backlighting)

  • Shiga, Tomokazu
    • 한국조명전기설비학회지:조명전기설비
    • /
    • 제15권2호
    • /
    • pp.31-38
    • /
    • 2001
  • LCD는 비발광형 소자이므로 배면광이 필요하다. 현재의 LCD 배면광용 냉음극 형광램프는 전기-광학적 특성을 좋게 하기 위하여 수은방전을 사용한다. 그러나 수은의 이용은 외부 온도에 따라 특성이 변하는 결점과 환경 문제가 있다. 이 결점을 보완하기 위하여 원통방전형, 미세방전형 그리고 평면방전형 등 세가지 방식의 무수은 램프가 개발되어 왔다. 원통 방전형 무수은 램프는 수은 대신 Xe을 사용한다. Xe 방전이 수축되는 것을 막기 위하여 한쪽 전극은 외벽에 코일형태로 감아서 사용한다. 그리고 코일형태의 전극의 권선 간격을 조절하여 균일한 방전을 얻는다. 이 형태는 무수은 냉음극 형광램프의 두배의 광속을 얻을 수가 있다. 미세방전형 무수은 램프는 두 개의 절연체로 절연되 금속 전극사이의 방전공간에 수많은 미세방전을 일으켜 발광시킨다. 이 방식은 대향 방전구조와 면 방전구조의 두가지가 있다. 이 방식은 전극이 유전체로 둘러쌓여 있으므로 수명이 높다. 새로운 평면방전형 무수은 램프를 개발하였다. 이 램프는 두 개의 유리평판 사이에 방전공간을 만들고 한쪽 유리면의 양쪽 가장자리에 두 개의 전극을 설치하여 면방전을 유도한다. 양쪽 유리면에는 삼원색 형광체를 도포하고 Xe을 봉입하여 Xe의 진공자외선으로 형광체를 발광시킨다. 이 램프는 전극이 유전체로 덮혀있어 수명이 길다. 실험결과 기체압력 6.7[kPa], 구동전압 1,130[V]에서 최대휘도 9,200[$cd/m^2$], 광효율 20.4[lm/W]을 었었고, 기체 압력 2.7[kPa] 구동전압 1,120[V]에서 최대효율 34.1[lm/W], 휘도 1,080[$cd/m^2$]을 얻었다. 현재 무수은 램프는 수은 램프에 비해서 광학적 특성이 좋지 못하다. 무수은 램프에서 좋은 광학적 특성을 얻기 위해 가장 중요한 것은 수축이 없이 방전을 확산시키는 것이다. 이를 위해서 램프구조와 구동법을 최적화하는 것이 필요하다. 또한 기체압력을 높임으로서 Xe의 여기복사를 얻을 수 있었다.

  • PDF

금코팅 유리관 반사체를 이용한 다이오드 여기 고출력 고효율 Nd:YAG 레이저 (Efficient Diode Pumped High Power Nd:YAG Laser with a Gold Coated Flow Tube)

  • 이종민;문희종;이종훈;한재민;이용주
    • 한국광학회지
    • /
    • 제9권3호
    • /
    • pp.186-190
    • /
    • 1998
  • 직경이 10mm인 유리관의 외벽을 금으로 코팅하여 반사체로 사용되고 최대 출력이 140W인 레이저 다이오드바 (laser diode bar) 3개를 여기 광원으로 이용한 고출력 Nd:YAG 레이저를 설계 제작하였다. 레이저봉의 지름은 6mmdlqu 길이는 130mm이다. 투과율이 11%인 출력경과 전반사경을 사경하여 선형공진기를 구성하고 연속발전시켰을 때 약 130W의 Nd:YNG 레이저 연속출력을 얻었으며 이 때 측정된 기울기 43%, 광변환 효율은 31%에 도달하였다. 레이저빔의 빔질인자(beam quality factor)M2는 최대 다이오드 츨력에서 약85로 관측되었으며 레이저 발진시에 측정한 열렌즈 초점거리의 역수와 여기광의 출력비는 5.3∼7.4D/kWpump 이었다.

  • PDF

CLT 건축물의 외벽 및 지붕 구조체 레이어 구성 유형 분석 (Analysis of the Types of External Wall and Roof Structure Layer Composition of CLT Building)

  • 유동완;이태구
    • 한국농촌건축학회논문집
    • /
    • 제22권4호
    • /
    • pp.71-78
    • /
    • 2020
  • Today, the whole world is going through a big chaos due to the COVID-19, but paradoxically, the emergence of COVID-19 has been leading to the need for sustainable development, such as Green New Deal that can improve global warming and carbon emissions, and the need for sustainable architecture is growing bigger and bigger in the architectural field as well. The level of CLT buildings in Korea is at a very rudimentary stage, while CLT buildings remedying existing wooden buildings are getting the spotlight among European countries for sustainable architecture. This study was conducted to categorize structure layer compositions of overseas CLT buildings and analyze architectural techniques and materials applied by collecting and analyzing information about CLT structure layer compositions of overseas CLT building-related institutions, companies and cases. When classifying structure layer compositions of foreign CLT buildings depending on the roles of layers. it was revealed that exterior wall structure layers were combined and organized within a sequence of external finishing, ventilation, waterproof, board, external insulation, airtightness, structure, airtightness, interior insulation, interior finishing, sloped roof structure layers were external finishing, ventilation, waterproof, board, external insulation, airtightness, structure, airtightness, interior insulation, interior finishing, flat roof structure layers were external finishing, ventilation, waterproof, planking wood, external insulation, waterproof, external insulation, airtightness, structure, airtightness, interior insulation, interior finishing.

지하외벽체의 단열유형별 열성능에 관한 실험적 연구 (An Experimental Study on the Thermal Performance by the Type of Thermal Insulation in Basement Structures)

  • 이재윤
    • 한국태양에너지학회 논문집
    • /
    • 제22권1호
    • /
    • pp.73-80
    • /
    • 2002
  • This is study of the planning of thermal insulation to prevent heat loss in a basement, is aimed at investigating the heat loss from the basement space and basement structures. The results analyzed in these researches are as follows; To analyze the heat loss from basement structures, this study experimented on the heat flow phenomenon of a non-insulation structure and two insulation structure models. From the result, the interior surface temperature of two insulation structures(B, C, model) showed an equal temperature, but the interior surface temperature of a non-insulation structure (A model) is different from the two models, Therefore, we understand that the insulator constructed in the basement structure makes a role of preventing the heat loss from the basement. In addition, the exterior surface temperature of two insulation structure models showed an equal temperature. Specially, judging from the temperature difference of C model. we understand that the performance of insulator is low under the definite depth of underground. The thermal insulation design should be constructed under the definite depth of underground considering outdoor and building conditions.

지붕재

  • 전국보일러설비협회
    • 보일러설비
    • /
    • 12호통권143호
    • /
    • pp.143-150
    • /
    • 2005
  • 주택외간의 품격을 좌우하는 요소인 지붕에 주로 사용되는 자재는 기와이다. 과거에는 주로 재래식 한식기와가 사용되었지만 지금은 거의 사용되지 않고 양식기와인 스패니시 기와가 보편적으로 사용되고 있다. 그 이유는 외장재로 많이 사용되는 자재들과 가장 잘 어울리기 때문이지만 외벽에 돌이 사용된 경우에는 천연슬레이트가 더 적합하다. 최근에는 컬라아스팔트 슁글이 지붕재로 각광을 받고 있는데 미려한 외관을 만들 뿐만 아니라 방수효과도 뛰어나기 때문이다. 또 한 장두장 이상 겹쳐져 시공되기 때문에 내구성도 강하고, 강인한 글래스매트나 다공성 원지를 심재로 특수개질 아스팔트를 합쳐 채색된 돌입자로 표면을 처리하여 내후성 · 내변색성도 강하다. 무게도 기와의 1/5이 안돼 구조체의 하중부담을 줄여 안정성을 기할 수 있다. 이외의 지붕재로 금속제품, 유리, 태양열 주택의 집열판 등 부분적인 지붕으로 사용되는 것으로가 한때 유행했던 콘크리트 슬라이브 등을 들 수 있다.

  • PDF