• Journal of Korea Water Resources Association
• /
• v.32 no.5
• /
• pp.593-601
• /
• 1999

The knowledge about structure of the velocity in the stream IS essential in the investigation of stream meandering, erosion and sediment transport, and dispersion of pollutants in the stream. In this study, theoretical velocity profile model in which transverse profile of the longitudinal velocity in the stream can be predicted using stream hydraulic data was developed. The proposed model was tested with the measured velocity data of the Nakdong river. The result shows that the numerical model simulates properly the general shalxc of the measured velocity profiles. The simulated profiles agree well with measurements, especially in the aspects of skewness and flatness.atness.

• Journal of Korea Multimedia Society
• /
• v.6 no.7
• /
• pp.1131-1138
• /
• 2003

Active noise control(ANC) is an approach to noise reduction in which a secondary noise source destructively interferes with the unwanted noise is introduced. Generally, the performance of ANC is determined how well a secondary noise tracks noises. A secondary noise is generated from the cancelling speaker and a error sensor pick up error signal. The transfer function between the cancelling speaker and the error sensor is not flat and distorts secondary noises. Consequently, the performance of ANC is degraded by the transfer function. In this paper, a single sensor ANC which considers the characteristics of the speaker and the error sensor is proposed. To reduce distortion of secondary noises, the transfer function is estimated by adaptive inverse modelling and the primary noises are estimated by Kalman filter. Experimental results show that the proposed single sensor ANC effectively attenuates noises.

• The Journal of the Acoustical Society of Korea
• /
• v.14 no.5
• /
• pp.29-35
• /
• 1995

Nonlinear distortion arising from the nonlinear movement of the loudspeaker diaphragm degradates the tone quality. The distortion is, in low frequency range, mainly caused by nonlinear characteristics of the suspension stiffness and the force factor. In this paper, the nonlinear suspension stiffness and the nonlinear force factor are modeled to the quadratic functions and a method is proposed to determine their coefficients. An additional mass to the diaphragm moved the quiescent point of the diaphragm and uncoupled the stiffness and the force factor. This made it possible to deter mine the coefficients of the nonlinear suspension stiffness by measuring the resonance frequencies at several quiescent points. The coefficients of the nonlinear force factor are then determined by fitting the curve which is calculated from the waveforms of input voltage and input current, and the displacement of the diaphragm at resonance frequency.

• Proceedings of the Acoustical Society of Korea Conference
• /
• autumn
• /
• pp.213-216
• /
• 2000

본 연구에서는 마이크로폰 어레이를 이용하여 화자의 음성신호로부터 화자의 위치를 추정하는 기존의 대표적인 알고리듬인 CPSP(Cross Power Spectrum Phase)로부터 보다 반향에 강인한 알고리듬인 저주파 위상 복원 알고리듬을 제안한다. CPSP 함수는 상호 상관관계(Cross Correlation)가 정규화 되어있는 형태를 갖는데, CPSP 함수의 최대 값 인덱스로부터 화자의 공간정보인 TDOA(Time Difference Of Arrival)를 추출한다. 그러나 CPSP 함수를 이용한 공간정보 추정 알고리듬은 실내환경에서 심각하게 일어나는 반향신호에 대해서 취약한 단점을 갖고 있다. 본 논문에서 제안하는 저주파 위상복원 알고리듬은 주파수 측면에서 반향신호가 CPSP 함수에 미치는 영향을 분석하여 반향으로 인하여 왜곡된 위상 성분을 복원함으로써 보다 신뢰도 있는 TDOA 추정을 가능하게 한다. 반향신호로 인한 CPSP의 위상은 저주파보다 고주파에서 심하게 왜곡되는데, 각각의 반향신호의 도달 시간을 기하학적 분포를 갖는 확률변수로 모델링하여 이를 수학적으로 증명하였다. 또한 실제 환경에서 채집한 음성신호를 이용한 모의 실험을 통해 개선된 알고리듬의 성능 개선을 확인하였다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.3A
• /
• pp.328-336
• /
• 2006

A novel pre-equalization method for terrestrial DTV transmitters is presented. A pre-equalizer has been used in transmitters to correct group delay and amplitude distortions caused by a channel filter. In the proposed pre-equalizer, an equation-error adaptive IIR filtering scheme is adopted unlike the conventional pre-equalization using FIR filtering schemes. The pole-zero modelling property of IIR filters improves the signal-to-noise ratio and may deal with diverse linear distortions existing in DTV transmitters as well as the channel filter distortion. Simulation results show that the proposed IIR pre-equalizer performs better than the FIR pre-equalizer in terms of the residual mean-square error.

• Geophysics and Geophysical Exploration
• /
• v.11 no.3
• /
• pp.214-220
• /
• 2008

The distortion effect of electrical response for two-dimensional (2-D) DC resistivity method was verified in terms of 2-D inversion result of synthetic data obtained by three-dimensional (3-D) modeling, which is frequently applied to assess the safety of center core-type fill dam structure. The distortion effect is due to 2-D interpretation for 3-D structure. By the modeling analysis, we found that the water level is correctly described in the resistivity section around the middle part rather than each end side of the embankment due to the 3-D terrain effect, when the material of the embankment is assumed as horizontally uniform. And when we set the slope of outer rock fill part as uniform. the sharper the slope of the center core is, the more similar the resistivity section reflects. On the other hand, when the slope of the rock fill is steep, the resistivity section shows the water level at lower position than the real one, and the 3-D distortion effect at the end side of the embankment was enhanced.

• Journal of the Korean Geophysical Society
• /
• v.6 no.3
• /
• pp.155-164
• /
• 2003

The validity and efficiency of the roll-along technique widely used in 2-D electrical resistivity survey are analyzed in case of the dipole-dipole and the Wenner-Schlumberger arrays by numerical modelling. The shallow anomalous resistivity bodies are successfully inverted both in the dipole-dipole and in the Wenner-Schlumberger arrays because the shallow data of pseudosection are not omitted by the roll-along technique. However, the deep anomalous resistivity bodies can not be well resolved due to the skip of observed data which is more significant in the Wenner-Schlumberger array having relatively poor horizontal coverage of obtaining data. Carrying out electrical survey adopting the dipole-dipole array, the skip of data is insignificant because it is unfeasible to expand the electrodes to the maximum electrode separation coefficient($n_max$) owing to low S/N ratio. In case of the Wenner-Schlumberger array, however, because it is generally feasible to expand the electrodes $n_max$ to the owing to high S/N ratio, it is highly possible that skip of data from the roll-along technique causes significant distortion of inversion results. Therefore, adopting the Wenner-Schlumberger array having deeper median depth(Edwards, 1977) than do the dipole-dipole array on condition of the same unit electrode spacing( ($a$) ) and $n_max$, it is recommended to determine $a$ based on not $n_max$but $n_prob$free from the skip of observing data and forward electrodes with keeping overlap interval 3/4 of the survey line length in order to reduce the distortion of resistivity structure and perform resistivity survey efficiently. These results are confirmed by numerical modelling.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.30 no.4
• /
• pp.353-362
• /
• 2012

3D building modeling from airborne Lidar without model regularization may cause positional errors or topological inconsistency in building models. Regularization of 3D building models, on the other hand, restricts the types of models which can be reconstructed. To resolve these issues, this paper modelled 3D buildings from airborne Lidar by building model regularization which considers more various types of buildings. Building points are first segmented into roof planes by clustering in feature space and segmentation in object space. Then, 3D building models are reconstructed by consecutive adjustment of planes, lines, and points to satisfy parallelism, symmetry, and consistency between model components. The experimental results demonstrated that the method could make more various types of 3d building models with regularity. The effects of regularization on the positional accuracies of models were also analyzed quantitatively.

• Journal of Korea Multimedia Society
• /
• v.3 no.6
• /
• pp.586-591
• /
• 2000

Color pictures on CPT are generally affected by the receiver characteristic and the condition of exterior illuminants. Moreover, readjustment of incorrect color in the CPT causes color distortion on a given picture. This paper describes a color adjustment method for modelling of CPT at the view point of observer in the ordinary lighting condition. To develop this method, we proposed ways of luminance recompensation under the gamma transformation for the intensity of illuminant, hue/saturation compensation for the types of illuminant and control of specific color for the reference. Based on these method, a color correlation system is suggested with the goal of reducing the color errors which are represented due to the influence of reflectance component of illuminants, the gamma transformation of CPT and the frequently adjustment of reference scene to set a optimum color.

• Journal of KIISE:Computer Systems and Theory
• /
• v.33 no.8
• /
• pp.547-553
• /
• 2006

We present a new geometry coding method for 3D meshes, an adaptive subdivision. Previous localized geometry coding methods have demonstrated better compression ratios than the global approach but they are considered hard to use in practice partly due to time - consuming quantization. Our new localized scheme replaces this quantization with an adaptive subdivision of the localized range. The deeper level a user chooses, the closer to the original the mesh will be restored. We also present an improved connectivity coder upon the current leading Angle-Analyzer's by applying a context-modeling. As a result, our new coder provides reliable and intuitive controls between bit-rate and distortion without losing efficiency.