• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.24 no.3 s.174
• /
• pp.786-793
• /
• 2000

Nylon, Polyacetal and PTFE were studied to gain a better understanding of their tribological behavior. Wear tests were conducted with reciprocating motion under dry sliding conditions. Friction coefficient and specific wear rate were measured as a function of sliding distance. The worn surfaces were examined with a Scanning Electron Microscope(SEM). Polyacetal showed lowest specific wear rates and PTFE exhibited lowest friction coefficient. The dominant wear mechanism found were adhesion and abrasion.

• Tribology and Lubricants
• /
• v.7 no.2
• /
• pp.13-21
• /
• 1991

선박은 사람이나 화물을 수상(水上) 운송수단의 목적으로 오랜 옛날부터 사용하여 왔으며, 금세기에 이르러서는 오랜 옛날부터 사용하여 왔으며, 금세기에 이르러서는 인류문화의 급속한 발전에 따라 주변생활이 가속화(Speed화), 합리화되어 문명의 혜택을 보다 많이 누리게 된 반면에, 국제간에 파생되는 여러가지 교환현상을 바탕으로 지구는 하나의 촌(村)으로 되어 유통경제를 지배하고 이용하는 운송수단으로 발전되어 왔다. 물질문명이 급속히 발전하는 작금, 선용추진 주 기관의 동향을 살펴보면, 1981년 세계에서 건조한 2000톤급 이상의 선박은 940여척으로 이중 13척이 증기 Turbine. 추진(推進), 나머지는 미끄럼 저속 디이젤 또는 중고속 디이젤 추진으로 되어있다. 이와 병행하여 선박에 쓰여지고 있는 각종 윤활제는 주기관으로서 디이젤 engine, Trubine engine, 가솔린 engine, 석유, engine, 선외기, 왕복동 증기기관, Journal계열로서 역전기, 추력베어링, 중간 베어링, 프로펠러베어링, 일반상선으 보조기계로서 발전기, 공기압축기, Boiler, 각종 Pump, 각종 Motor, 냉동기, 조타장치, Side Thrust, 갑판기계, 환기용 송풍기 및 통풍통, Oil 청정기, 수밀로(水蜜爐), 소화설비, 주기 개방용 천정 크레인, elevator, 어선으로서의 주 기관, 보조기기 등에 쓰여지고 있으며 이밖에 수중날개선 등에도 적용되는 등 실로 다양다종한 윤활제가 요구되고 있음에, 본 논고에서는 제목 건을 중심으로 한 선박과 윤활의 중요 Point만을 간추려 기술하고져 한다.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.18 no.4
• /
• pp.67-73
• /
• 2014

The dry sliding wear behavior of graphite that is used as the sealing material to cut off hot gas was evaluated as a function of applied load, sliding speed and temperature. The reciprocating wear tests were carried out at room temperature and elevated temperatures. An attempt has been made to develop a mathematical model by response surface methodology and an analysis of variance technique was applied to confirm the validity of the developed model. Also, the wear mechanism was compared through the observation of the worn surface by SEM analysis.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.37 no.5
• /
• pp.625-630
• /
• 2013

The friction behavior of a 60-${\mu}m$-thick anodic aluminum oxide (AAO) film having cylindrical nanopores of 45-nm diameter was investigated as a function of impregnated oil viscosity ranging from 3.4 to 392.6 cSt. Reciprocating ball-on-flat sliding friction tests using a 1-mm-diameter steel ball as the counterpart were carried out with normal load ranging from 0.1 to 1 N in an ambient environment. The friction coefficient significantly decreased with an increase in the oil viscosity. The boundary lubrication film remained effectively under all test conditions when high-viscosity oil was impregnated, whereas it was easily destroyed when low-viscosity oil was impregnated. Thin plastic deformed layer patches were formed on the worn surface with high-viscosity oil without evidence of tribochemical reaction and transfer of counterpart material.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.38 no.5
• /
• pp.469-474
• /
• 2014

The high temperature gas-cooled reactor (HTR-10) is designed to produce electricity and hydrogen. Graphite is used as reflector, support structures, and a moderator in reactor core; it has good resistance to neutron and is a suitable material at high temperatures. Friction is generated in the graphite structures for the core reflector, support structures, and moderator because of vibration from the HTR-10 fuel cycle flow. In this study, the wear characteristics of the isotropic graphite IG-110 used in HTR-10 were evaluated. The reciprocating wear test was carried out for graphite against graphite. The effects of changes in the contact load and sliding speeds at room temperature and $400^{\circ}C$ on the coefficient of friction and specific wear rate were evaluated. The wear behavior of graphite IG-110 was evaluated based on the wear surfaces.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.17 no.5
• /
• pp.113-120
• /
• 2013

Graphite is commonly used as a solid lubricant leading to low friction coefficient and abrasion. In this study, wear behavior of sealing graphite(HK-6) at elevated temperature was evaluated. Reciprocating wear test was carried out as wear occurred graphite as a seal(HK-6) is positioned between the liner and driving shaft. Variables which are temperature, sliding speed and contact load are set. This study suggest optimized environment conditions through the wear properties of graphite.

• Journal of the Korean Society for Railway
• /
• v.18 no.5
• /
• pp.410-418
• /
• 2015

A slider of the pantograph undergoes uneven and abnormal wear due to sliding contact with the catenary. In the case of rain, the loss of lubricant increases the frictional resistance for the reciprocating motion between the catenary and the slider, accelerating local wear. The slider in the winter should have good wear resistance, which can be achieved through alloy design. Uneven and abnormal wear were not observed in the results of a driving test using a wear resistant slider. It was found that the increased density of the slider enhanced the corrosive effects of Fe-Ti, preventing the occurrence of abnormal wear by maintaining the wear and arc resistance in the rainy season. Also, mechanical and electrical wear did not affect the composition of the slider, and this improved the wear resistance. Inaddition, the slider was applied to an entire train and was tested during driving; ananalysis of the correlation of the catenary was performed, including during the rainy season and the winter season.