• Journal of the Korean Recycled Construction Resources Institute
• /
• v.1 no.1
• /
• pp.17-25
• /
• 2013

Thermal storage technology used for indoor heating and cooling to maintain a constant temperature for a long period of time has an advantage of raising energy use efficiency. This, the phase changing material, which utilizes heat storage properties of the substances, capsulizes substances that melt at a constant temperature. This is applied to construction materials to block or save energy due to heat storage and heat protection during the process in which substances melt or freeze according to the indoor or outdoor temperature. The micro-encapsulation method is used to create thermal storage from phase changing material. This method can be broadly classified in 3 ways: chemical method, physical and chemical method and physical and mechanical method. In the physical and chemical method, a wet process using the micro-encapsulation process utilized. This process emulsifies the core material in a solvent then coats the monomer polymer on the wall of the emulsion to harden it. In this process, a surfactant is utilized to enhance the performance of the emulsion of the core material and the coating of the wall monomer. The performance of the micro-encapsulation, especially the coating thickness of the wall material and the uniformity of the coating, is largely dependent on the characteristics of the surfactant. This research compares the performance of the micro-capsules and heat storage for product according to molecular mass and concentration of the surfactant, SSMA (sulfonated styrene-maleic anhydride), when it comes to micro-encapsulation through interfacial polymerization, in which Dodecan-1 is transformed to melamin resin, a heat storage material using phase changing properties. In addition, the thickness of the micro-encapsulation wall material and residual melamine were reduced by adjusting the concentration of melamin resin microcapsules.

• Journal of Mushroom
• /
• v.16 no.3
• /
• pp.131-139
• /
• 2018

The king oyster mushroom (Pleurotus eryngii) is widely consumed because of its flavor, texture, and its functional properties such as antioxidant activity and prebiotic effects. However, long-term product storage and transportation (e.g., export) are difficult because of its limited durability. The shelf-life of king oyster mushroom is affected by environmental factors such as temperature, humidity, gas composition, and ventilation, which may affect sensory characteristics including respiration rate, texture, moisture, flavor, color, and pH. The major problems regarding storage of mushrooms are browning, flavor changes, and softening. To address these problems, novel preservation techniques were developed, and more durable variants were bred. Different drying methods, gamma irradiation, chitosan coating, modified atmosphere (MA) packaging, and controlled atmosphere (CA) storage were evaluated in order to extend the shelf-life of king oyster mushrooms. Freeze drying showed better results for the preservation of mushrooms than other drying methods. Irradiation with 1 kGy was more effective for extending mushroom shelf-life than higher doses. The preservative performance of chitosan-based films was improved by combining the compound with other hydrocolloids, such as oil, protocatechuic acid, and wax. The CA storage conditions recommended for king oyster mushrooms are 5kPa $O_2$ and 10 to 15kPa $CO_2$ at temperatures below $10^{\circ}C$. Active MA packaging with microperforated PP film was also effective for maintaining quality during storage.

• Solar Energy
• /
• v.18 no.3
• /
• pp.177-183
• /
• 1998

The thermal performance of a heating board with microencapsualted PCM was investigated and compared to conventional heating board. The employed PCM was the myristic acid $$ and was encapsulated by the multiple layers of PMMA and paraffin wax. The size of encapsulated PCM was $1{\sim}1.5mm$. Accoring to ANSI/ASHRAE test procedure, the close-loop test configuration was installed. Air was used as the heat transfer fluid and a calibrated orifice was employed for the measurement of air flow rates. The thermal performance test of two different heating boards(with 10 wt% PCM and without PCM) was conducted for different air flow rates and the heat transfer characteristics during cooling was compared. The test results showed that the surface temperature of heating board with 10 wt% PCM maintained higher during the cooling process than that of the heating board without PCM and experimentally determined heat transfer coefficient in heating board with PCM showed higher value compared to heating board without PCM.

• Proceedings of the Plant Resources Society of Korea Conference
• /
• 2019.04a
• /
• pp.109-109
• /
• 2019

2018년 5월 전라북도 남원군에서 재배하여 수확 후 $0^{\circ}C$ 저장고에서 예냉을 마친 산마늘을 사용하였으며 외 포장 상자는 골판지로 구성된 통기공이 없는 골판지상자 1kg용을 사용하였다. 골판지상자와 함께 내부 포장으로 사용하기 위한 내포장 필름은 $20{\mu}m$ 두께의 HDPE으로 된 필름 봉지, 흡습종이는 파라핀왁스 코팅 종이($32{\times}35cm$, 태영산업)를 이용하여 조합 처리하고 국내에서 개발한 기능성 필름2종으로 포장처리는 총 4가지로 (1) PE(관행) (2) PE+흡습지 (3) 기능성필름1($30{\times}58cm$, 기능성물질 1%+40,000OTR, 제조사: 신영산업사) (4) 기능성필름2($30{\times}58cm$, Key fresh, 제조사: 씨앤케이프로팩(주)) 각 처리당 1kg 씩의 산마늘 잎을 포장하였다. 실험은 포장 처리 후 상온상태로 전북 완주군 실험실까지 수송하였으며 실험실 도착 후 상온 실험실에 두고 2일과 6일 후 중량감소율, 색도, 엽록소, 손실률 및 종합선도 등 품질특성 변화를 조사하였고 각 포장방법별 온도와 상대습도 변화를 보기 위하여 산마늘 잎이 포장된 상자 내부 중앙 부분에 디지털온습도기록계(SP-2000-20R)를 고정한 후 측정하였다. 대조구로 사용한 PE필름 단용으로 포장한 산마늘 잎은 상온저장 6일 경과 후 중량 소율이 1.7%, PE필름+신선지 처리는 1.0%, 기능성필름1과 기능성필름2는 거의 중량감소가 없어 1% 미만의 변화를 보였다. 산마늘 잎의 SPAD 값에 의한 엽록소 수치와 색도를 측정한 명도($L^*$)와 Hue angle 값의 변화는 기능성필름1과 기능성필름2가 유사하게 높게 유지되었고 반면에 PE필름은 저장 2일 후 부터 값이 감소하기 시작하여 6일 후 크게 감소하였다. 저장 6일 후 기능성필름1과 기능성필름2가 외관품위에서 높은 평가를 받아 상품성을 유지하고 있었으나 PE필름 처리와 PE필름+흡습지 처리는 상품성을 상실한 상태였다. 이러한 경향은 건전율에 있어서도 유사하였으며 기능성필름1(다공성 나노 물질이 혼입되어 있으며 산소투과율을 $40,000cc/m2{\cdot}day{\cdot}atm$으로 조성한 필름)이 상온저장 6일 후 상품성을 유지하는 건전율이 83%로 가장 높았다.