• 한국산학기술학회:학술대회논문집
• /
• 한국산학기술학회 2006년도 춘계학술발표논문집
• /
• pp.192-195
• /
• 2006

본 논문에서는 다이 플레이트(Die Plate)를 제작할 때 생산성 향상을 위해서 3D CAD/CAM 시스템을 적용하였다. 사용된 3D CAD/CAM 소프트웨어는 UG NX 3.0이며 생성된 NC 코드는 CNC밀링 및 와이어 컷 방전가공기에 전송되어 다이 플레이트를 자동 가공한다.

• 대한기계학회논문집
• /
• 제14권5호
• /
• pp.1147-1154
• /
• 1990

본 연구에서는 초음파 화학 가공(ultrasonicassisted chemical mahining)을 이용하여 100$\mu\textrm{m}$이하의 전극봉을 제작하였고 제작한 전극을 이용하여 미세구멍을 방전 가공함으로써 가공특성을 파악하고, 방전액을 각각 등유(kerosene)와 물로하여 구멍의 표면을 비교, 분석하였으며 전극의 지름, 가공물의 두께에 대한 오버컷과 경사도(tap- er) 그리고 전극의 마멸을 조사하였다.

• 한국산학기술학회:학술대회논문집
• /
• 한국산학기술학회 2006년도 춘계학술발표논문집
• /
• pp.196-199
• /
• 2006

프레스금형의 부품 중에서 펀치와 다이플레이트를 제작하는데 주로 W-EDM을 이용한다. W-EDM전에는 기계가공으로 제작된 펀치와 다이플레이트로 제품을 생산하게 되면 생산량이 200만${\sim}$230만개를 생산하고 금형수명을 다하였다. 그러나 W-EDM으로 제작된 금형으로 제품을 생산하게 되면 생산수량이 70만${\sim}$80만개를 생산하고 금형수명이 다하였다. 이것은 W-EDM한 후에 발생되는 가공변질층에 기인하는 것으로 사료되므로 W-EDM전과 W-EDM후의 가공면에 대한 SEM촬영을 실시하여 가공변질층의 발생을 확인하고 이에 대한 제거방법을 연구하였다.

• 한국기계가공학회지
• /
• 제3권3호
• /
• pp.17-23
• /
• 2004

The performance and life of a die are influenced by the machining methods. In order to examine the effects of machining methods on surface charactenstics, simple experiments are devised and performed. A die steel STD11, commonly used as a die material in press working, is selected. Three ways of machining methods to manufacture a die are considered. Those are (1) milling and then grinding, (2) wire-cut electric discharge dachining (W-EDM) and (3) heat treatment after W-EDM. The resulting surface roughnesses are measured. Also, the changes of surface microstructures are investigated using the scanning electron microscope(SEM) with energy dispersive X-ray spectrometer(EDS) and the results are discussed in details.

• 한국정밀공학회지
• /
• 제21권8호
• /
• pp.143-151
• /
• 2004

This paper deals with the precision NURBS interpolator for wire-EDM. Previous research about OAC (Open Architecture Controller) is mostly aimed at NC cutting machines such as milling or lathes, and hence these results are inadequate to apply to wire-EDM. In contradiction to NC machines, wire-EDM operates relatively slow feed rates and based on a feedback control loop to the machining process. The 2-stage interpolation method which reflects wire-EDM specific characteristics was proposed. The constant interpolation error could be acquired through 1 st stage interpolation. Feed rate regulation was performed through 2nd stage interpolation. The suggested algorithm was implemented to test-bed PC-NC system. Computer simulations and the experimental machining were conducted.

• 산업공학
• /
• 제10권3호
• /
• pp.125-132
• /
• 1997

We proposed a 2-step neural network approach for estimating machining parameters of electric discharge wire cut. The first step net, which is described as a backward neuro-estimation, is designed for estimating coarse cutting parameters while the second phase net, as a polishing forward neuro-estimation, is utilized for determining fine parameters. Sequential estimation procedure, based on backward and forward net, is performed using the net's approximation capability which is M to 1 and 1 to M mapping property. Experimental results an given to evaluate the accuracy of the proposed 2-step neuro-estimation.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1997년도 춘계학술대회 논문집
• /
• pp.1044-1048
• /
• 1997

Wire-cut EDM is used in Die manufacturing as the part of non-traditional cutting process, But,the determination of it's cutting condition with high efficiency and precision is difficult due to the influence of cutting environment and cutting mechanism. In this study, we examine the cutting performance of the SKD11 and Brass in wire-cut EDM and make the neural network which have the configuration of 5-12-2 and back-propagation learning rule. Through the neural network, we can appraise the cutting performance before working and determine the optimal cutting condition. By introducing this method to the W-cut EDM, we can enhance the cutting efficiency.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1987년도 한국자동제어학술회의논문집; 한국과학기술대학, 충남; 16-17 Oct. 1987
• /
• pp.255-259
• /
• 1987

This paper introduces the system AUTO-CUT for the automatic generation of NC tapes for wire-cut EDM (Electrodischarge Machining) parts. The information input to the system is the description of the part geometries, the tool motions and the cutting conditions etc. The system generates CLDATA. Also dynamic graphic display of the tool motions can be-performed on the screen.

• 한국산학기술학회:학술대회논문집
• /
• 한국산학기술학회 2009년도 추계학술발표논문집
• /
• pp.275-278
• /
• 2009

프레스 금형의 가공 및 제작 공정의 자동화란 불필요한 반복 작업을 피하여 시간을 절약하고 표준 품질의 가공물을 얻고자 하는 것이다. 자동화의 범위는 3차원 금형설계, 머시닝 센터, 와이어 컷 방전 가공, 도면작업까지를 포함하는 것이다. 자동화 공정이 구축이 완료되면 동일한 품질의 가공품을 얻을 수 있고 가공정보는 3D 카탈로그 및 다이 셋을 기준으로 작업을 한다. 1개의 부품을 금형설계자동화 모듈을 이용하여 3차원으로 금형설계를 완료하고 난후에 동일한 환경에서 프레스 금형의 가공 및 제작을 할 때 이의 공정자동화에 관하여 연구한 것이다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2000년도 춘계학술대회 논문집
• /
• pp.739-742
• /
• 2000

From the experimental study of W-EDM for alloyed steel, the characteristics such as Hand Drum Form and surface roughness have been observed and evaluated for various conditions. In square hole, the increase of If as to made condition the calculate high value of surface roughness. Also compare dimensionless square hole with circle hole' graph. In circle hole, if a value of surface roughness IP 6 in a side of circle it show a 0.4${\mu}{\textrm}{m}$ and in IP 8, 0.6${\mu}{\textrm}{m}$, in IP 10, 0.7${\mu}{\textrm}{m}$, in IP 12. 0.8${\mu}{\textrm}{m}$ higher than before. This figure show the surface roughness is higher than before, because a table move in either X-axis or Y-axis in square hole, on the contrary, in circle there table move in X-axis and Y-axis at the same time. hand drum form getting small when wire tension increase 1000gf to 1500gf, at the same working conditions. the smaller of off time, the mailer of hand drum form in same condition and same wire tension. but if you compare square hole with circle hole' graph hand drum form displayed in maintained term of working condision, on the contrary, in case of square hole variation of hand drum form is more increase than a grow of IP