• Journal of the military operations research society of Korea
• /
• v.35 no.2
• /
• pp.33-49
• /
• 2009

The objective of this study is as follows. First, the hazard function on the failure probability density function of the K-1 tracked vehicles can be occurred in the form of the bathtub curve. Second, the failure mode may be different under two different operational situations. The research result shows that the bathtub curve can be fitted in the Weibull distribution, that assumes different shapes according to the specific stage of the system's life cycle. The K-1 tracked vehicle has a relatively high hazard(failure) rate at the time of its first service. The failure rate starts decreasing for a time immediately after it goes into service. After the break-in period, the surviving components have a fairly constant hazard rate. As the K-1 system ages, deterioration of its various parts takes place and the hazard rate starts Increasing. Second, the result shows the failure rate in the harsh operational environment is higher than that in the mild operational environment. In conclusion, the bathtub curve can be logically appropriate in establishing the depot overhaul cycle. Moreover, it is necessary for determining the right time of the depot overhaul to consider not only the age of defense equipment but also the different operational environment.

• Journal of Broadcast Engineering
• /
• v.5 no.2
• /
• pp.159-166
• /
• 2000

This paper analyzed the transmission performance when we transmited digital TV signal through analog CATV network. We considered random noise, microreflection, and composite tripple beats as channel impairment factors, and random noise and CTB( Composite Tripple Beat) are modelled as Gaussian distribution and Weibull distribution respectively. Channel modellings for microreflections are classified as three cases, and we exploited carrier recovery and blind equalizer to minimize their effects. We developed a computer simulator for the digital transmission system using DVB-C specification to analyze digital transmission performance, and found BER values according to $E_{b}$/$N_{o}$ for each configuration.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.08a
• /
• pp.425-425
• /
• 2012

입사되는 태양광의 광 경로와 투과도는 태양전지 효율에 밀접한 관련이 있기 때문에 이를 개선하기 위한 많은 연구들이 진행 중에 있다. 본 연구에서는 광 경로를 길게 하고, 투과도를 개선하기 위해 알루미늄 도핑된 ZnO (AZO) 씨드층을 ICP플라즈마 처리를 하였고, 플라즈마 처리된 기판에 ZnO 나노와이어를 성장하였다. 플라즈마 처리된 AZO 기판과 ZnO 나노와이어가 성장된 기판의 광 투과도를 분석하기 위해 Haze meter를 이용하였으며, FE-SEM을 이용하여 각 기판의 형상을 분석하였다. AZO 씨드층을 플라즈마 처리했을 경우 ITO 기판보다 400-500 nm 영역에서 투과도가 향상되었고, ZnO 나노와이어가 성장한 기판은 400~600 nm 영역에서 투과도가 개선되는 것을 확인 할 수 있었다. ZnO 나노와이어가 성장된 기판을 이용하여 P3HT:PCBM 블랜딩된 유기 태양전지를 제작하여 전기적 특성 및 효율을 평가 하였다.

• Journal of Korea Water Resources Association
• /
• v.40 no.1 s.174
• /
• pp.39-50
• /
• 2007

This paper presents applications of the log-linear ROCOF(rate-of-occurrence-of-failure) and the Weibull ROCOF to model the failure rate of individual cast iron pipes in a water distribution system and provides a method of estimating the economically optimal replacement time of the pipes using the 'modified time-scale'. The performance of the two ROCOFs is examined using the maximized log-likelihood estimates of the ROCOFs for the two types of failure data: 'failure-time data' and 'failure-number data'. The optimal replacement time equations for the two models are developed by applying the 'modified time-scale' to ensure the numerical convergence of the estimated values of the model parameters. The methodology is applied to the case study water distribution cast iron pipes and it is found that the log-linear ROCOF has better modeling capability than the Weibull ROCOF when the 'failure-time data' is used. Furthermore, the 'failure-time data' is determined to be more appropriate for both ROCOFs compared to the 'failure-number data' in terms of the ROCOF modeling performances for the water mains under study, implying that recording each failure time results in better modeling of the failure rate than recording failure numbers in some time intervals.

• Journal of the Korean Data and Information Science Society
• /
• v.26 no.1
• /
• pp.11-19
• /
• 2015

A certain number of products are transported to be sold each month and some of them are returned for repair. In this study we first assume that the transported products are the ones that have been sold, Then nonparametric approach is applied to the warranty returns data to see how the reliability decreases over time. Parametric approach such as Weibull distribution is applied to the same data and the results for both nonparametric and parametric approaches are compared. Next we assume that there is a time lag between shipment and sale. Then both nonparametric and parametric approaches are applied to the time-lag data and the results are compared.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.9 no.2
• /
• pp.141-147
• /
• 2016

NHPP software reliability models for failure analysis can have, in the literature, exhibit either constant, monotonic increasing or monotonic decreasing failure occurrence rates per fault. In this paper, infinite failures NHPP models that repairing software failure point in time reflects the situation, was presented for comparing property. Commonly used in the field of software reliability based on Flexible Weibull extension distribution software reliability of infinite failures was presented for comparison problem. The result is that a relatively small shaping parameter was effectively. The parameters estimation using maximum likelihood estimation was conducted and model selection was performed using the mean square error and the coefficient of determination.. In this research, software developers to identify software failure property follows shape parameter, some extent be able to help is considered.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.8 no.5
• /
• pp.339-344
• /
• 2015

NHPP software reliability models for failure analysis can have, in the literature, exhibit either constant, monotonic increasing or monotonic decreasing failure occurrence rates per fault. In this paper, infinite failures NHPP models that repairing software failure point in time reflects the situation, was presented for comparing property. Commonly used in the field of software reliability based on Weibull extension distribution software reliability of infinite failures was presented for comparison problem. The result is that a relatively large shape parameter was effectively. The parameters estimation using maximum likelihood estimation was conducted and Model selection was performed using the mean square error and the coefficient of determination. In this research, software developers to identify software failure property follows shape parameter, some extent be able to help is considered.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2001.10a
• /
• pp.724-728
• /
• 2001

In this study, the dielectric breakdown of epoxy composites used for transformers was experimented and then its data were simulated by Weibull distribution probability. The dielectric breakdown characteristics origin in epoxy composites were examined and various effects of dielectric breakdown on epoxy composites were also discussed. As a result, first of all, speaking of dielectric breakdown properties, the more hardener increased the stronger breakdown strength at low temperature because of cross-linked density by the virtue of ester radical. And the breakdown strength of specimens with filler was lower than it of non-filler specimens because it is believed that the adding filler forms interface and charge is accumulated in it, therefore the molecular motility is raised, the electric field is concentrated, and the acceleration of electron and the growth of electron avalanche are early accomplished. In the case of filled specimens with treating silane, the breakdown strength become much higher since this suggests that silane coupling agent improves interfacial combination and relaxs electric field concentration. Finally, from the analysis of weibull distribution, it was confirmed that as the allowed breakdown probability was given by 0.1%, the applied field value needed to be under 21.5㎹/cm.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2002.11a
• /
• pp.779-783
• /
• 2002

The dielectric breakdown of epoxy composites used for transformers was experimented and then its data were simulated by Weibull distribution probability. As a result, first of all, speaking of dielectric breakdown properties, the more hardener increased the stronger breakdown strength at low temperature because of cross-linked density by the virtue of ester radical. And the breakdown strength of specimens with filler was lower than it of non-filler specimens because it is believed that the adding filler forms interface and charge is accumulated in it, therefore the molecular motility is raised, the electric field is concentrated, and the acceleration of electron and the growth of electron avalanche are early accomplished. In the case of filled specimens with treating silane, the breakdown strength become much higher since this suggests that silane coupling agent improves interfacial combination and relaxs electric field concentration. Finally, from the analysis of weibull distribution, it was confirmed that as the allowed breakdown probability was given by 0.1%, the applied field value needed to be under 21.5MVcm.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.12 no.4
• /
• pp.327-335
• /
• 2019

This study develops a prediction model for toilet and laundry water end-uses based on surveyed data which measured housing and household characteristics of 140 households over 5 years in Korea. Classical regression model assuming a normal distribution was not appropriate and estimated parameters were biased, because the distribution of measured water-uses was left-skewed. As an alternative to this problem, we considered the distribution of weibull and lognormal for each water-uses, and three regression models were compared using log-likelihood and scale parameter. As a result, weibull regression were chosen to be appropriate for both water-uses and also presented the factors that affect each water-use. This results expect that an insight is provided on water resources utilization and theoretical support role for effective water resource management.