본 연구에서는 도시지역의 하나인 주거지역에서 배출되는 강우유출수 내에 중금속이 장치형 비점 오염저감시설 중에 하나인 와류형시설에서 제거되는 특성을 파악하고자, 대상 중금속을 Zn으로 삼고 2007년 4월부터 2008년 11월까지 모니터링을 수행하였다. 유출수 모니터링은 와류형 시설의 유입부와 유출부에서 유량과 수질을 각각 시간변화에 따라 측정하였으며, 시설유입부와 유출부, 그리고 시설하부에 쌓인 침전물을 채취하여 침전물 모니터링도 수행하였다. 그 결과, 높은 강우강도에서 발생된 강우유출수는 와류형 시설내에 HRT를 감소시켜 Zn의 제거효율이 낮게 관측되었으며, 특히 HRT가 20분이내의 조건이 될 경우에는 처리효과가 없는 것으로 확인되었다. Zn는 입자성물질과 밀접한 관계를 맺으며 제거되는 특성을 보였으며, 입자성물질이 스크린에 의한 여과 및 침전작용이 일어날 때 입자성물질에 부착되어 거동하는 특성을 보였다. 그 중에 0.075mm 이하의 미세한 입자에 부착된 고농도의 Zn는 제거되지 못하였고, 와류형 시설 후단에 후처리시설로서 저류시설을 두어 충분한 HRT를 제공한 결과, 와류형 시설만을 운전하였을 때와 비교하여 높은 제거특성을 보이게 되었다.
Proceedings of the Korean Society of Propulsion Engineers Conference
/
2012.05a
/
pp.244-248
/
2012
A series of hybrid rocket combustion experiments were carried out with PMMA/GOx changing diameter and length of the disk installed at pre-chamber. The disk can generate vortex shedding flow and change flow conditions prior to entering the fuel grain which could also alter the combustion characteristics and pressure oscillations. The interaction of vortex shedding in the pre-chamber and small-scale vortices adjacent to burning surfaces by using combustion test.
Vortex-shedding flows past a circular cylinder for 200≤ Re ≤ 5000 are numerically simulated with the PowerCFD code, using a finite volume method and an unstructured grid system, developed by the author. The simulation is peformed by solving the unsteady 2-D Wavier-Stokes equations with both no model and turbulence model. The resulting Reynolds number dependence of the Strouhal number and of the drag and lift coefficients is compared with both experiments and previous numerical results. It is found that, in the range of 200≤ Re ≤ 5000 the calculation method with a turbulence model is capable of producing reasonably more accurate results than that with no model for the main practically relevant parameters such as Strouhal number, drag and lift coefficients.
Proceedings of the Korea Water Resources Association Conference
/
2012.05a
/
pp.494-494
/
2012
비점오염이란 도시, 도로, 농지, 산지, 공사장 등 불특정 장소에서 발생되는 오염을 말하며 건기 시에는 오염물질이 토지에 축적되었다가 강우 발생 시 강우와 함께 유출되어 관리에 많은 어려움이 있다. 유출된 오염물질은 특별한 전처리 없이 하천이나 호소로 유입되어 각종 수질오염, 부영양화 및 생활환경에 많은 영향을 받게 되며 상수원수에 문제가 발생하게 된다. 비점오염원의 특징은 초기강우 유출수는 고농도이며 토사, 협잡물 등이 많이 포함되어 있다. 초기강우 발생형태는 수로의 형태, 노면상태 유역현상 및 강우도달시간 등 유역의 특성에 따라서 달라지며, 토지이용상황, 하수도 정비여부 등에 따라서 오염물질의 종류와 농도가 변한다. 도시지역과 도로주변에는 먼지, 쓰레기, 마모된 타이어 등이 축적되며, 임야 및 산림에서는 비료, 축분, 대기오염물질의 강하물 등이 축적이 되어 강우 시 빗물에 씻겨 인근 수계로 직접 방류된다. 팔당상수원 비점오염원 최적관리사업 기본계획 및 타당성조사사업이 실시되어 비점오염저감시설의 설치대상 대표지점이 선정되었다. 그리고 각 배수구역의 특성에 맞는 최적관리기술이 제시되었다. 하지만 몇몇 시설들은 기대한 결과에 못 미치는 성과를 내고 있다. 따라서 이번 연구에서는 이러한 비점오염저감시설의 시설형 중 하나인 와류형 비점오염저감시설의 운용에 따른 효율성 분석에 관한 연구를 실시하였다. 실험장치는 현재 운영되고 있는 와류형 비점오염저감시설 참고하여 실험장 조건에 맞춰 1/4축적의 정상모형을 제작하였고 저감시설로 유입되는 원수의 유량과 단차를 변화시켜 실험하였다. 저감시설의 유입조건이 변하게 되면 시설 내 유속, 체류시간 등 운전조건이 바뀌게 되므로 제거효율도 변하게 될 것이다. 저감효율산정은 시설로 유입된 유입수와 유출수의 SS농도를 이용하여 산정하였다. 와류형저감시설의 SS제거효율을 연구한 결과, 모형에서 유량 $0.0016m^3/s$, 단차 10cm 인 조건에서 8.7%로 가장 높은 효율이 측정되었다. 이를 원형에서의 조건으로 환산하면 유량 $0.0512m^3/s$, 고수조와 저감시설의 단차 40cm일 경우 가장 높은 효율이 나타난다. 이와 같은 이유는 시설에 유입되는 유량이 증가 할수록 내부의 유속이 증가해 저감시설 내 처리수의 체류시간 감소와 교란이 발생하여 저감효율이 떨어지는 것으로 사료된다.
Byeon, Hyun Hyuk;Kim, Seo Jun;Yoon, Byung Man;Lee, Yun Ho
Proceedings of the Korea Water Resources Association Conference
/
2018.05a
/
pp.60-60
/
2018
최근 도시지역의 불투수율 증가로 인한 유역의 도달시간 감소와 첨두유출량이 증가함에 따라 내수침수 잠제 위험성이 증가하고 있다. 이에 우수배제 시스템의 수방능력 향상을 위한 빗물펌프장의 신설 및 증설에 대한 요구가 증가하고 있다. 하지만 빗물펌프장의 신설 및 증설에는 건설부지 확보의 문제와 비용적인 문제 등의 현실적인 현계들이 있다. 따라서 기존에 설치되어 있는 빗물펌프장의 배수효율을 증대시킬 수 있다면 빗물펌프장의 신설 및 증설에 따른 과도한 예산지출을 줄일 수 있을 것이다. 빗물펌프장의 배수효율은 흡입부 내에서 발생하는 와류를 얼마나 잘 제어하느냐에 따라 크게 달라진다. 만약 흡입부 내에 강한 와류가 존재한다면, 흡입관 주위에서 선회류를 유발시켜 펌프 효율을 떨어뜨리는 원인이 된다. 따라서 펌프 운영 시 흡입부 내에서 발생하는 와류를 제어하기 위하여 와류발생 저감장치(Anti Vortex Device)를 설치하여 와류를 제어하는 방법을 이용하고 있다. 하지만 국 내외 빗물펌프장 설계기준에서 와류발생 저감장치에 대한 정량적인 효과는 제시되어 있지 않다. 따라서 본 연구에서는 PIV(Particle Image Velocimetry)를 이용하여 와류발생 저감장치가 펌프 흡수조에 설치되었을 때 흐름특성 및 와도분포 분석을 통해 와류발생 저감장치의 형태에 따른 효과를 정량적으로 분석하고자 한다. 그 결과 와류발생 저감장치를 설치 한 후 흐름개선효과를 확인하였다.
Proceedings of the Korean Society of Propulsion Engineers Conference
/
2011.11a
/
pp.649-652
/
2011
A series of hybrid rocket combustion experiments were carried out with PMMA/GOx changing diameter and length of the disk installed at pre-chamber. The disk can generate vortex shedding flow and change flow conditions prior to entering the fuel grain which could also alter the combustion characteristics and pressure oscillations. Isolated dimple-like surface roughness patterns distributed all over the fuel surface, which can be thought of as a realization of the inherent flow instability. It is very likely that the formation of cell structures is originated from the modification of boundary layer characteristics of an entering oxidizer flow caused by a blowing effect mainly taking place near the wall. This coincided with our LES results. It would be a meaningful basis to understand combustion instability of hybrid rocket motor.
Proceedings of the Korean Society of Propulsion Engineers Conference
/
2009.05a
/
pp.229-232
/
2009
DC-shift phenomenon can be observed in Hybrid rocket combustion. This phenomenon makes performance drop which is structure problem or reduce thrust. Understanding of DC-shift phenomenon, the conditions of the hybrid rocket combustion stability can be found. In this paper, the condition of DC-shift was found and made by using acoustic mode and vortex shedding frequency. The conditions of stable combustion was defined from the experimental study of DC-shift phenomenon.
This paper described a laboratory investigation of micro hydropower at lower head water in a free vortex flow. The vortex height, turbine rotation and torque for straight blade with inner curved edge, twisted blade and curved blade were investigated at the flow rate of 0.0069 ㎥/s in the inlet channel. The results showed that the optimum vortex strength occurred within the range of the diameter of basin to the outlet diameter ratios of 0.17~18.5. The power output and efficiency of straight blade were higher as compared to other blades. The highest amount of generated energy was 12.33 W, the torque was 0.91 N·m and the highest efficiency by considering effective head was 29.5 %, whereas the highest efficiency by considering vortex height was 80.5 % at the rotational speed of 132 rpm. The water vortex velocity of straight blade was about 2.8 times larger than the mean velocity in the inlet channel.
Proceedings of the Korea Water Resources Association Conference
/
2011.05a
/
pp.317-317
/
2011
맨홀 및 관로에 퇴적되는 유사는 우수관거의 통수능을 감소기키고 우수관거 시스템의 효율을 저하시켜, 맨홀에서 역류를 발생시켜 저지대 침수의 한 원인인 되고 있다. 또한 관거내에서 유수가 일정한 유속을 확보하지 못하면 오염물이 침전되고, 관거내 유하시간이 길어져 침전물 부패로 인한 황화물질 및 악취 등이 발생할 수 있다. 따라서 우수 및 하수관거 시스템에서 유사와 관련된 주된 연구는 관거내의 유사거동 특성을 규명하고자 하는 것이었다. 그러나 맨홀과 관련하여서는 맨홀내의 오염물 지체시간 및 확산 특성분석이 전부였고, 유사의 퇴적 및 배출 등과 관련된 거동특성 연구는 매우 미흡한 실정이다. 본 연구에서는 유입관과 유출관이 $90^{\circ}$로 접합된 맨홀을 대상으로 수리실험을 실시하고, 맨홀형태(사각형, 원형), 유사유입형태(연속주입, 일정기간주입), 유사종류(주문진표준사, 모래), 유사유입량 및 맨홀내부형상 변화에 따른 맨홀내 유사퇴적량을 확인하였다. 실험결과 그림 1과 같이 $90^{\circ}$ 접합맨홀에서는 유사유입형태와 무관하게 유입유사량이 증가할수록 퇴적량 또한 증가하였다. 그러나 유사퇴적량은 사각형맨홀보다 원형맨홀에서 적었다. 이는 관거가 $90^{\circ}$로 접합된 맨홀내에서의 유사거동 양상은 우선 유입되는 유사가 맨홀바닦에 퇴적되고 와류에 의해 부유되는 유사가 유출관을 통해 배출되는데 사각형맨홀에 비하여 원형맨홀에서 와류가 더 크게 형성되기 때문인 것으로 판단된다. 유사가 일정기간주입되는 경우 원형맨홀 내부에 퇴적되는 유사량은 거의 없었다. 사각형맨홀내부에 벤칭을 설치한 경우 설치전과 비교하여 퇴적량은 50%이상 저감되었고, 일정기간주입시에는 벤칭 설치 후 유사퇴적량은 거의 없었다. 유입유사가 모래인 경우 맨홀내 퇴적량은 주문진표준사와 비교하여 증가하였다. 모래는 주문진 표준사와 비교하여 중량이 크다. 따라서 같은 흐름조건에서 주문진표준사와 비교하여 부유되는 유사량이 적고, 배출되는 유사량 또한 적었다. 유량과 관거유속이 동일한 조건에서 유출관과 유입관이 일직선상으로 연결된 중간맨홀내부에 퇴적된 주문진표준사의량과 비교하여 $90^{\circ}$ 접합맨홀의 퇴적량이 상대적으로 적었다. 이 또한 앞서 기술한 와류의 영향으로 판단된다. 일반적으로 $90^{\circ}$접합맨홀내부에서 발생하는 와류가 중간맨홀보다 크고, 이로 인해 에너지손실은 커지지만 유사거동과 관련하여서는 와류가 크게 발생하는 맨홀조건에서 퇴적량이 적음을 실험적으로 확인하였다.
The sea water exchange of Koje Bay in the southeastern part of the Korean Peninsula was estimated on the basis of current measurements and oceanographic observation. The exchange ratio was estimated by salinity differences and tidal prism method. The range of exchange ratio at the central part at the entrance of the bay is estimated to be around $26\%$ at spring tide and 5 to $15\%$ at neap tide. The magnitude of exchange ratio, however, can be changed due to water exchange, hydrometeorological and geomorphological conditions. The flushing time deduced by tidal prism was about 48 hours at spring tide and 81 hours at neap tide. Tidal induced eddy motion may play an important role on the seawater exchange in the bay.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.