• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2008.05a
• /
• pp.71-76
• /
• 2008

In this study, side force, drag, and the yawing moment were measured based on the angle of attack by using two models of different nose shapes with slender bodies, which were general shapes in the subsonic area. As a result, the side force and yawing moment were the highest at a specific angle of attack. The boundary between asymmetrical normal state and asymmetrical abnormal state were able to be seen. As a result of analyzing the side force, drag, and yawing moment by time, reliability varied depending on the shape of the head at the same angle of attack. The results of measuring pressure distribution from the surface of the slender body at each angle of attack were as follows: as the angle of attack gets higher, the distribution of surface pressure was asymmetrical.

• Proceedings of the Korean Institute of Industrial Safety Conference
• /
• 1998.11a
• /
• pp.21-27
• /
• 1998

비정상, 층류 유동으로 실린더와 같은 블러프(Bluff)물체 주위를 흐르는 유동에서 발생하는 Von Karman 와동은 외부 유체로부터 전달된 힘이 물체 표면에 분포되어 양력이나 항력등에 많은 영향을 주기 때문에 유체역학 분야에 있어서 매우 중요한 분야라 할 수 있다. 이러한 유동은 벽으로부터 점진적으로 전달되고 확산되는 큰 와류에 의해서 특징 지워진다. (중략)

• Proceedings of the Korean Nuclear Society Conference
• /
• 1998.05a
• /
• pp.508-513
• /
• 1998

가압경수로에서 열여유도를 평가하는 당대의 접근 방범이 고찰되었다. 통상적으로 열여유도 평가는 국부 열속이 임계열속(CHF: Critical Heat Flux)으로부터 떨어진 거리로부터 도출된 핵비등이탈률(DNBR: Departure from Nucleate Boiling Ratio) 개념을 사용하여 수행된다. 본 연구에서는 열여유도 정가에 대하여 제기되는 문제가 당대의 접근 방법에 이러한 영향을 주는 지 평가하고 이에 대한 향후 연구 방향을 살펴 보고자 하는 것이다. 혼합날게 그리드에 의해 야기되는 와류 효과가 크면 클수록 현재의 부수로 분석 방법의 신뢰성이 제고되며 상관식의 예측 성능을 평가할 때 데이터 분포가 중요하다는 착안점이 얻어졌다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.4
• /
• pp.613-618
• /
• 2019

The flow-induced vibration in a heat exchanger may cause the damage to piping. Therefore, it is necessary to establish the flow induced vibration characteristics for the structural stability of a heat exchanger. The purpose of this study was to compare the generation, development, and separation characteristics of a vortex around a circular tube with respect to time when the flow velocity of the inlet was fluctuating constantly and periodically. The time characteristics of lift and drag and the PSD characteristics were also investigated. In the case of a constant inlet flow velocity, the well-known Kalman vorticity distribution was shown. The vortex generation, growth, and separation were also observed alternately at the upper and lower sides of the tube. In the case of periodic inlet flow velocity, the vortex occurred simultaneously in the upper and lower sides of the tube. In the case of constant inlet flow velocity, the magnitude of the lift PSD was 500 times larger than that of drag. The frequency was 31.15 Hz and that of drag was doubled at 62.3 Hz. In case of a periodic inlet flow velocity, the PSD of the drag was approximately 500 times larger than that of lift. The frequency was 15.57 Hz, which was the same as the inlet-flow velocity frequency. In addition, the frequency of lift was 31.15 Hz, which was the same Karman vortex frequency.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.1 no.1
• /
• pp.33-45
• /
• 1997

Axisymmetric shear layers around a free jet is forced by co-flowing and counter-flowing secondary jets from/to an annular tube around the jet nozzle. The jet potential core extends far downstream with co-flowing secondary jets due to inhibited vortex developing and pairing. For counter-flowing cases, the axisymmetric shear layer around the jet transits from convective instability to absolute instability for velocity ratios R＝1.3～l.65 for the uniform velocity jets. Consequently, the jet potential core length increases and the turbulence level in the jet core is reduced significantly. The jets are controlled better with extension collars attached to the outer nozzle exit because the annular secondary flow is guided well by the extension collars. For the vectoring of jet, the annular tube around the jet is divided in two parts and the only one part is used for suction. The half suction makes the different shear layer around the jet and vectoring the jet by Coanda effect. The vectoring and turbulent components are varied significantly by the suction ratio. The experiments are carried out to investigate the characteristics of forced free jets using flow visualization, velocity and turbulence measurements.

• Journal of Aerospace System Engineering
• /
• v.13 no.5
• /
• pp.32-38
• /
• 2019

The flying wing configuration with high sweep angles and rounded leading edge represent a complex flow of structures by the leading edge vortex. For control of the tailless flying wing configuration with unstable directional stability, flaperon is used. In this study, we conducted numerical simulations for a non-slender flying wing configuration with a rounded leading edge and analyzed the effect of the sideslip angle and flaperon. Through aerodynamic coefficient analysis, it was found that the effect of AoS on lift and drag coefficient was minimal and the side force and moment coefficient were markedly influenced by AoS. As the sideslip angle increased, the pitch break, which is related to the pitching moment coefficient, was delayed. Through stability analysis, the directional and lateral static stability of the flying wing configuration were increased by flaperon. Also, the structure and behavior of the leading edge vortex were analyzed by observing the contour of the pressure coefficient and the skin friction line.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.16 no.4
• /
• pp.50-56
• /
• 2012

Vent mixer can provide main flow directly into a recirculation region downstream of the mixer to enhance fuel-air mixing efficiency. Based on experimental results of three-dimensional velocity, vorticity and turbulent kinetic energy obtained by a stereoscopic PIV method, the performance of the vent mixer was compared with that of the step mixer which was used as a basic model. Thick shear layers of the vent mixer induced the increase of the penetration height. The turbulent kinetic energy mainly distributed along a boundary layer between the main flow and the jet plume. This turbulent field activates mass transfer in a mixing region, leading to the mixing enhancement.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2021.06a
• /
• pp.92-92
• /
• 2021

체외수정을 기반으로 이루어지는 성게의 수정 과정은 성게 주변에서 형성되는 복잡한 난류 흐름의 영향을 받게 된다. 성게 몸체의 하류부에 형성되는 재순환 영역 (recirculation zone) 내에는 다양한 난류 와류 흐름이 존재하며, 이들은 성게 몸체에서 방출된 정자와 난자의 충돌을 일으키고 수정 과정에 지대한 영향을 미친다. 즉, 성게의 수정 과정을 이해하기 위해서는 성게 주변의 흐름에 대한 유체역학적 관점에서의 분석이 수행되어야 한다. 본 연구의 목적은 성게 몸체에 의해 발생한 난류 흐름이 성게의 체외 수정에 미치는 영향에 대해 조사하는 것이다. 이를 위해 본 연구에서는 상용 프로그램인 오픈폼 (OpenFaom)을 활용하여 수치 모의를 수행하였다. 성게 주변의 유동장은 LES (Large Eddy Simulation)을 기반으로 모의하였고, 정자와 난자의 확산 궤적은 라그랑지안 입자 추적 (Lagrangian Particle Tracking) 알고리즘을 통해 구현하였다. 총 5개의 유속 조건 (0.025 - 0.20 m/s) 에 대해 모의를 수행하였으며 정자와 난자 사이의 거리를 바탕으로 수정률을 산정하였다. 정자와 난자의 뭉쳐있거나 퍼져있는 공간적인 분포 형태는 Standardized Morisita 지수를 통해 수치적으로 표현하였으며 이들과 수정률과의 관계를 규명하였다. 연구 결과에 따르면 성게 수정은 유속 조건이 0.1 m/s일 때 가장 빈번하게 발생하였으며, 성게 수정의 성공 여부는 크게 2가지 조건에 의해 결정되었다. 첫 번째로, Standardized Morisita 지수가 높을수록 다시 말해 생식세포들이 공간적으로 뭉쳐있어야 하며 두 번째는, 생식세포들을 충돌시킬 수 있는 원동력인 작은 와류가 존재해야 한다. 와류의 크기가 너무 크게 되면 생식세포들은 충돌하지 않고 확산만 되기 때문에 오히려 수정률이 감소하였다. 영역별로 분석한 결과에 따르면, 성게 몸체에 의해 형성된 재순환 영역이 수정과정에 있어 가장 지배적인 영역임을 확인하였다.

• Journal of the Society of Naval Architects of Korea
• /
• v.37 no.2
• /
• pp.38-45
• /
• 2000

A breaking-wave caused by a cylinder moving under the free-surface is studied, which is designed to unveil the interaction between breaker and cylinder using PIV at CWC. The detailed structures of the vortical flow is obtained from the velocity field measured by PIV technique. The vorticity distribution behind the breaker and originated from the breaker. It has been obvious that the vortices from breaker greatly affect the whole wake field at S/D=1. Certainly PIV was confirmed to be a very versatile means to investigate the complex flow fields such as breaking wave.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.28 no.8 s.227
• /
• pp.902-909
• /
• 2004

A steady-state Reynolds averaged Navier-Stokes simulation was conducted to investigate the distribution of the Reynolds stress tensor inside tip leakage vortex of a linear compressor cascade. Two different inlet flow angles ${\beta}=29.3^{\circ}$(design condition) and $36.5^{\circ}$(off-design condition) at a constant tip clearance size of $1\%$ blade span were considered. Classical methods of solid mechanics, applied to view the Reynolds stress tensor in the principal direction system, clearly showed that the high anisotropic feature of turbulent flow field was dominant at the outer part of tip leakage vortex near the suction side of the blade and endwall flow separation region, whereas a nearly isotropic turbulence was found at the center of tip leakage vortex. There was no significant difference in the anisotropy of the Reynolds normal stresses inside tip leakage vortex between the design and off-design condition.