• 제목/요약/키워드: 와류강도

검색결과 82건 처리시간 0.024초

음향 가진된 층류 비예혼합 분류 화염에서 거대 와류 거동에 관한 가시화 연구 (A Visual Investigation of Coherent Structure Behaviour Under Tone-Excited Laminar Non-Premixed Jet Flame)

  • 이기만;오세기;박정
    • 대한기계학회논문집B
    • /
    • 제27권3호
    • /
    • pp.275-285
    • /
    • 2003
  • A visualization study on the effect of forcing amplitude in tone-excited jet diffusion flames has been conducted. Visualization techniques are employed using optical schemes. which are a light scattering photography. Flame stability curve is attained according to Reynolds number and forcing amplitude at a fuel tube resonant frequency. Flame behavior is globally grouped into two from attached flame to blown-out flame according to forcing amplitude: one sticks the tradition flame behavior which has been observed in general jet diffusion flames and the other shows a variety of flame modes such as the flame of a feeble forcing amplitude where traditionally well-organized vortex motion evolves, a fat flame. an elongated flame. and an in-burning flame. Particular attention is focused on an elongation flame. which is associated with a turnabout phenomenon of vortex motion and on a reversal of the direction of vortex roll-up. It is found that the flame length with forcing amplitude is the direct outcome of the evolution process of the formed inner flow structure. Especially the negative part of the acoustic cycle under the influence of a strong negative pressure gradient causes the shapes of the fuel stem and fuel branch part and even the direction of vortex roll-up to dramatically change.

노즐 탭과 노즐 내부 낮은 돌출부가 초음속 제트유동장에 미치는 영향에 관한 연구 (An Experimental Study on the Effects of Tabs and Small Proturbances Inside Nozzle on Supersonic Jet Flowfield)

  • 진원진;조창권;이열;윤웅섭
    • 한국항공우주학회지
    • /
    • 제30권5호
    • /
    • pp.24-31
    • /
    • 2002
  • 축 대칭 원형노즐 출구에 삼각형 형태의 작은 탭이나 얇은 테이프가 부착되었을 때 나타나는 초음속 제트유동장의 변화에 관한 연구가 쉴리렌 영상과 피토압력 측정을 통하여 수행되었다. 노즐 출구면적의 1 %에 해당하는 작은 탭에서 나타나는 유동방향 와류에 의한 제트유동 변화는 유동이 과소팽창 될 때 완전팽창과 과대팽창의 경우에 비하여 더 크게 나타나며 이로 인한 유동유입이 더 크게 나타남을 알 수 있었다. 탭의 설치각도 변화에 의한 영향도 평가되었으며, 유동이 과대팽창 될 때 노즐 안으로 구부러진 탭의 설치가 충격파의 간섭강도를 약화시키고 이로 인한 마하디스크의 소멸현상을 관찰할 수 있었다. 아울러 노즐내부 낮은 높이의 돌출부가 후방 유동장의 원주방향으로 압력변화를 나타내고, 이러한 압력변화는 유동의 팽창 정도에 영향을 받음을 알 수 있었다.

양력선 방법을 이용한 지면효과가 날개의 공력성능에 미치는 영향 분석 (Analysis of the Influence of Ground Effect on the Aerodynamic Performance of a Wing Using Lifting-Line Method)

  • 이창호;강형민;김철완
    • 한국항공우주학회지
    • /
    • 제42권4호
    • /
    • pp.298-304
    • /
    • 2014
  • Weissinger의 방법을 기반으로 양력선 방법을 지면효과를 고려한 해석이 가능하도록 확장하였다. 이 방법을 이용하여 가로세로비 10의 타원형 날개와 인간동력항공기 날개에 대해 지면효과에 의한 공력성능 변화를 예측하였다. 날개가 지면에 가까워질수록 날개의 와류강도는 약간 증가하지만 내리흐름은 크게 감소한다. 인간동력항공기 날개의 경우에 날개가 지면에 가까울수록 양력은 증가하여 높이가 2m에서 양력계수는 지면효과를 받지 않을 때보다 5% 증가한다. 유도항력계수는 날개가 지면에서 스팬길이 높이에 있을 때에 지면효과가 없을 때보다 10% 감소하고 높이가 2m이면 55% 감소한다.

자동차 시트 쿨링용 고성능·저소음 컴팩트 원심팬 개발 (Development of high performance and low noise compact centrifugal fan for cooling automotive seats)

  • 김재현;유서윤;정철웅;장동혁;안민기
    • 한국음향학회지
    • /
    • 제37권6호
    • /
    • pp.396-403
    • /
    • 2018
  • 본 논문에서는 쾌적한 운전 환경을 제공하기 위해 자동차 시트를 냉각시키기 위한 고성능 및 저소음 원심팬을 개발하였다. 먼저 팬 성능 테스터 및 전산유체역학(Computational Fluid Dynamics, CFD) 시뮬레이션을 이용하여 기존 팬 장치의 유동 특성을 분석하였다. 예측한 유동장 분석을 통하여 팬 허브 팁 근처의 와류 및 팬 허브 상단의 정체된 유동 현상이 관측되었다. 이러한 와류 및 정체 유동을 줄이기 위해 두 가지 설계 요소를 고안하였다. 첫째, 팬 날개와 팬 하우징 최소 간극(cut-off)를 증가시켜 난류강도를 줄이고 그 결과로 전체적인 음압 레벨을 줄이고자 하였다. 둘째, 허브 형상은 정체 유동을 줄이기 위해 형상을 변경하였다. 제안된 설계의 타당성을 수치해석을 통해 확인하였다. 수치해석결과를 바탕으로 프로토타입을 제작하고 팬 테스터에서 측정한 성능 곡선(P-Q curve)과 반무향실에서 측정한 음압 레벨의 분석을 통해서 유동과 소음 성능의 향상을 확인하였다.

자유유동 난류강도가 원형 곡면위의 분사홀 상류에서의 막냉각에 미치는 영향에 대한 연구 (Effect of Free-Stream Turbulence on Film-Cooling Upstream of Injection Hole on a Cylindrical Surface)

  • 서형준;국건;이준식;이상우
    • 대한기계학회논문집
    • /
    • 제18권3호
    • /
    • pp.645-652
    • /
    • 1994
  • The leading edge of a turbine blade was simulated as a circular cylindrical surface. The effect of free-stream turbulence on the mass transfer upstream of the injectionhole has been investigated experimentally. The effects of injection location, blowing ratio on the Sherwood number distribution were examined as well. The mass transfer coefficients were measured by a naphthalene sublimation technique. The free-stream Reynolds number based on the cylinder diameter is 53,000. Other conditions investigated are: free-stream turbulence intensities of 3.9% and 8.0%, injection locations of $40^{\circ}$, $50^{\circ}$, and $60^{\circ}$ from the front stagnation point of the cylinder, and blowing ratios of 0.5 and 1.0. The role of the horseshoe vortex formed upstream edge of the injected jet is dicussed in detail. When the blowing ratio is unity, and the coolant jet is injected at $40^{\circ}$, the mass transfer upstream of the jet is not affected by the coolant jet at all. On the other hand, when the injection hole is located beyond $50^{\circ}$, the mass transfer upstream edge of the injection hole suddenly increases due to the formation of the horseshoe vortex, but it dereases as the free-stream turbulence intensity increases because the strength of the horseshoe vortex structure becomes weakened. The role of the horseshoe vortex is clearly evidenced by placing a rigid rod at the injection hole instead of issuing the jet. In the case of the rigid rod, the spanwise Sherwood number upstream of the injection hole is much larger due to the intense influence of the horseshoe vortex.

KRISO 300K VLCC 이중모형선의 유동특성에 대한 풍동실험 연구 (Wind Tunnel Study on Flow Characteristics around KRISO 300K VLCC Double-body Model)

  • 김학록;이상준
    • 대한조선학회논문집
    • /
    • 제36권3호
    • /
    • pp.15-21
    • /
    • 1999
  • KRISO 300K VLCC 이중모형선 주위의 유동특성을 풍동실험을 통해 연구하였다. 선체 선미 주위유동과 후류유동의 평균속도 성분, 난류강도, 레이놀즈 전단응력 및 난류 운동에너지 분포를 열선풍속계를 이용하여 측정하였다. 실험은 선미와 후류의 횡단면에서 수행하였으며, 선체 표면에서의 유동 패턴을 정성적으로 조사하기 위하여 유막법을 이용한 유동가시화도 수행하였다. 선미와 근접 후류영역은 매우 복잡한 3차원의 유동특성을 가지고 있으며, 특히 종방향 와류영역에서 고리 모양의 후류 구조를 볼 수 있었다. 그리고 중앙평행부에서의 얇은 경계층은 선미 영역을 지나며 점차 두꺼워지고 복잡한 3차원 난류후류로 발전하였다.

  • PDF

조류 중에 놓인 V-형 구조물 주위의 연직순환류에 대한 연구 (Vertical Convection Flow around V-Shaped Structures in Uniform Current)

  • 양찬규;홍기용
    • 대한조선학회논문집
    • /
    • 제34권4호
    • /
    • pp.148-157
    • /
    • 1997
  • 본 논문에서는 유한체적법을 이용한 수치계산과 이차원수조에서의 유동가시화에 의한 실험적 연구를 통해 평행하게 흐르는 유체 내에 설치된 V-형 연직순환 구조물 주위의 유동현상을 해석하였다. V-형 연직순환 구조물은 성층화되어 연직방향으로 정체된 유동장을 교란하여 섞어주는 역할을 하는 해수유동 제어구조물로서 해상 구조물의 주변에 유동정체로 발생될 수 있는 부영양화 등을 감소시키는 도구로 사용될 수 있다. 판과 판의 사이각(dihedral angle; ${\theta}$), 판의 바닥면에 대한 경사각(inclination angle; ${\phi}$) 그리고 Reynolds 수에 대한 와류두(vortex head) 상승높이의 특성 및 유기속도(induced velocity)의 강도를 비교 검토함으로써 파라미터와 유동특성과의 관계를 살펴보았다. 또한 이를 통해서 연직순환 구조물의 최적형상은 사이각과 경사각이 $90^{\circ}$일 때라는 결론을 얻을 수 있었다.

  • PDF

CFD에 의한 2차원 Sharp Plane의 각도변화에 따른 유동특성에 관한 연구 (A CFD Study on Flow Characteristics with Inclined Angles of Two-Dimensional Sharp Plane)

  • 금종윤;박성호;박주헌;송근택;모장오;이영호
    • 한국마린엔지니어링학회:학술대회논문집
    • /
    • 한국마린엔지니어링학회 2001년도 춘계학술대회 논문집
    • /
    • pp.40-45
    • /
    • 2001
  • Recently, the use of numerical simulation has been increased rapidly because of the development of high performance computer systems. The present study is aimed to investigate flow characteristics of a two-dimensional sharp plane. Unsteady calculation by FDM(Finite Difference Method) based upon SOLA scheme which was performed at $Re=2{\times}10^4$in viscous incompressible flow within a finite domain on the irregular grid formation. Total numbers of irregular grids are $8{\times}10^4$. The minimum grid size is 1/100 of the plane length L which is the representative length. The inclined angles of every objects are $15^{\circ}, \;30^{\circ}\;and\; 45^{\circ}.$ And, the edge angle of the plane is $30^{\circ}.$ This study discussed the flow characteristics in term of the turbulent intensity, vorticity and frequency analysis. Developed flows show that the periodic Karman vortices occur at the back of the plane.

  • PDF

일렬관군에서의 난류 후류특성에 관한 연구 (Turbulent Wake Flow around Tubes in Single Row Tube Banks)

  • 조석호;부정숙
    • 대한기계학회논문집
    • /
    • 제13권5호
    • /
    • pp.1023-1031
    • /
    • 1989
  • 본 연구에서는 격자관군(in-line tube banks)과 엇갈림관군(staggered tube banks)에서의 유동특성을 해명하기 위한 기초로서, 일렬관군에 대해 유동특성을 통계적으로 조사한다. 이를 위해, 먼저 유동의 가시화와 관의 표면압력 측정실험이 행해진다. 또한, 통계적 기법의 도입을 통하여 관 주위의 평균속도, 난류강도, 파워 스펙트럼 밀도함수, 스트로홀수(strouhal number), 자기상관계수, 활률 밀도함수 등의 측정이 수행된다.

주파수 영역 기법을 이용한 회전익의 고속 충격소음 해석 (An Analysis of High Speed Impulsive Noise of Rotating Blades Using Frequency Domain Method)

  • 윤태석;이수갑
    • 한국소음진동공학회:학술대회논문집
    • /
    • 한국소음진동공학회 1996년도 추계학술대회논문집; 한국과학기술회관, 8 Nov. 1996
    • /
    • pp.443-449
    • /
    • 1996
  • 헬리콥터, 팬, 프로펠러, 터이빈같이 회전익에서 유체역학적 소음이 발생하는 장치의 설계에 있어서는 공기 역학적 성능 분석과 함께 소음에 대한 해석이 절대적으로 필요하다. 근래에 들어와서 소음에 대한 관심이 급격히 증가하고 공항 주변에서의 국제적인 규약들은 낮은 소음 수준(low noise level)을 규정하고 있으며, 이에 따라서 소음을 감소시키려는 연구가 매우 활발히 진행되고 있는 실정이다. 더욱이 컴퓨터의 냉각 팬을 비롯한 공조기기 및 산업기기에 사용되는 회전기계에서 발생되는 소음의 저감은 보다 더 쾌적한 환경을 요구하는 사회적 요구에 부합하면서 공력소음의 연구 분야가 더 넓어지고 있다. 본 논문에서는 소음예측 방법중의 하나인 음향상사(acoustic analogy)를 주파수 영역 방법(frequency domain method)을 이용하여 헬리콥터 블레이드의 고속 충격소음(High Speed Impulsive Noise)을 해석한다. 고속 충격소음은 블레이드-와류 상호작용 소음과 더불어 헬리콥터의 지배적인 소음원으로서 깃끝 속도가 큰 전진 수평비행(forward level flight)또는 제자리 비행(hovering flight)시 발생하는 소음으로 블레이드의 깃끝 마하수(critical Mach number)보다 크거나 비슷할 경우 충격파의 교란에 의해서 일어나는 충격적인 소음을 말한다. 고속 충격소음은 고주파수 스펙트럼 성분과 큰 소음강도를 가지고 있기 때문에 날카로운 금속성의 소리를 내며 먼 거리까지 전파되는 특징을 가지고 있다.

  • PDF