• Journal of The Korean Society of Grassland and Forage Science
• /
• v.29 no.4
• /
• pp.383-388
• /
• 2009

This study was conducted to investigate the dry matter intake, weight gain and the required area of grazing pasture for dairy goats. The experimental trials were conducted from April, 2007 to June, 2008 at the animal experimental station in Chungnam National University. The seed mixtures of grazing pasture were composed of orchardgrass (40%) + tall fescue (20%) + perennial ryegrass (10%) + alfalfa (15%) + red clover (15%). The grazing area was $5,000\;m^2$ which was composed of 4 paddocks (average $1,250\;m^2$/plot) and the goats were grazed twelve times by a rotational grazing system. The dairy goats (Saanen) were selected which had nearly the same body weight (average 31.1kg). The average chemical composition of herbage of mixture in grazing periods was crude protein (20.4%), NDF (65.3%) and ADF (31.1%) respectively and the in vitro dry matter digestibility was 68.9%. The average dry matter intake amount per head was 1.253 kg, and the intake amount per body weight was 3.01%. The average body weight gain during the grazing periods (184 days) was 17.4 kg, and the daily gain was 98 g. The required area of grazing pasture was calculated at $467.7\;m^2$ a dairy goat (weight 50 kg basis). This figure, being converted into animal unit (AU), corresponded to approximately 2.14 AU/ha.

• Horticultural Science & Technology
• /
• v.34 no.5
• /
• pp.719-726
• /
• 2016

The effect of high and low temperatures on seedling quality while raising of paprika (Capsicum annuum L.) seedlings, and their early development after planting was investigated. The control raising seedling temperature (RST) was $23^{\circ}C$; high temperature, $31^{\circ}C$; and low temperature, $15^{\circ}C$ throughout the raising seedling period. At $15^{\circ}C$ and $30^{\circ}C$, plant height, stem diameter, fresh weight, dry weight, number of leaves, and seedling leaf area were significantly lower than those at $23^{\circ}C$. At 4 weeks after planting, seedling's growth characteristics showed a similar pattern. Compared to $23^{\circ}C$, seedlings raised at $15^{\circ}C$ and $30^{\circ}C$ had an increased dry weight and leaf area per unit time after planting than during the seedling raising period. At 4 weeks after planting, crop growth rate and leaf area index were unaffected by RST, and relative growth rate and net assimilation rate at RSTs of $15^{\circ}C$ and $31^{\circ}C$ were higher than those those at RST of $23^{\circ}C$. At an RST of $15^{\circ}C$, growth speed and net assimilation rates were higher after planting than before planting, according to increased photosynthetic rate. Thus, high and low temperatures during the seedling raising period significantly reduced seedling growth and plant growth after planting. After planting, seedlings raised at $15^{\circ}C$ recovered more quickly than did those raised at $31^{\circ}C$.

• Fire Science and Engineering
• /
• v.29 no.5
• /
• pp.42-50
• /
• 2015

Three simulation approaches for turbulence were applied for the computation of propane dispersion in a simplified real-scale urban area with one building:, Large Eddy Simulation (LES), Detached Eddy Simulation (DES), and Unsteady Reynolds Averaged Navier-Stokes (RANS). The computations were performed using FLUENT 14, and the grid system was made with ICEM-CFD. The propane distribution depended on the prediction performance of the three simulation approaches for the eddy structure around the building. LES and DES showed relatively similar results for the eddy structure and propane distribution, while the RANS prediction of the propane distribution was unrealistic. RANS was found to be inappropriate for computation of the gas dispersion process due to poor prediction performance for the unsteady turbulence. Considering the computational results and cost, DES is believed to be the optimal choice for computation of the gas dispersion in a real-scale space.

• Journal of Bio-Environment Control
• /
• v.16 no.2
• /
• pp.142-145
• /
• 2007

Growth characteristics according to mixture ratio of used-rockwool in pot nursery, in Pinus densiflora, Torreya nucifera, Quercus acutissina and Fraxinus mandshurica nursery, was investigated. The used-rockwool on mixture ratio between used-rockwool and control (peatmoss: pearlite=1:1, v/v) were 0%, 30%, 50% and 70%. Flesh weight, dry weight and height of tree, in Pinus densiflora nursery, increased much more in 50% and 70% media but trunk diameter of tree had no difference according to mixture ratio. In Torreya nucifera nursery, flesh weight and height of tree in 70% medium and trunk diameter and numbers of shoot of tree in 50% and 70% media increased. Flesh weight, height and trunk diameter of tree, and chlorophyll (SPAD) and photosynthesis rate, in Quercus acutissina nursery, increased much more in 50% and 70% media, but dry weight of tree had only difference between non-mixed and mixed with rockwool. In Fraxinus mandshurica nursery, flesh weight and photosynthesis rate of tree increased much more in 70% medium, height, trunk diameter and total chlorophyll of tree had difference according to non-mixed and mixed with rockwool or had no only difference according to mixture ratio, respectively.

• Horticultural Science & Technology
• /
• v.28 no.4
• /
• pp.678-684
• /
• 2010

In an attempt to improve biomass and bioactive compound production, we cultured adventitious roots of $Eleutherococcus$ $koreanum$ in 250 mL Erlenmeyer flasks using Murashige and Skoog (MS) medium with different concentrations of auxins (IBA, NAA, IAA) and cytokinins (BA, kinetin, TDZ). Root biomass (fresh and dry weight) was enhanced at $5mg{\cdot}L^{-1}$ indole-3-butyric acid (IBA) after 5 weeks of culture. The content of total phenolics and flavonoids was also increased with $5mg{\cdot}L^{-1}$ IBA compared to ${\alpha}$-naphtalene acetic acid (NAA) or indole-3-acetic acid (IAA) treatments. The combination of $5mg{\cdot}L^{-1}$ IBA with $0.1mg{\cdot}L^{-1}$ thidiazuron (TDZ; N-phenyl-N'-1,2,3,-thidiazol-5-ylurea) enhanced root fresh and dry weight (1.4- and 1.6-fold, respectively) as well as the content of total phenolics and flavonoids compared to the relative control (without cytokinin). On the contrary, $N_6$-benzyladenine (BA) and 6-furfurylaminopurine (kinetin) did not significantly affect root biomass and bioactive compound production in adventitious roots of $E.$ $koreanum$. These results suggested that $5mg{\cdot}L^{-1}$ IBA combination with $0.1mg{\cdot}L^{-1}$ TDZ supplementation was most suitable for both biomass and bioactive compound production from adventitious roots of $E.$ $koreanum$.

• Journal of architectural history
• /
• v.17 no.4
• /
• pp.65-82
• /
• 2008

The wooden pagoda sites which have been confirmed in Baekjae's former territory so far have flattened surface of the earth or foundation pert made by digging up the earth. In particular, the latter is found more often in the pagoda sites of Baekjae, which is essential and absolutely necessary because of the characteristics of pagoda structure. The wooden pagoda sites with foundation part made by digging up the earth under the stylobate are found at Yongjeongli ruined temple site of Woongjin area, and at Neung-sa temple site, Wangheung-sa temple site, Geumgang-sa temple site, and Mireuk-sa temple site of Sabi period. They are also observed at Hwanglyong-sa nine-storied wooden pagoda of Shilla and at Biin five-storied stone pagoda of early Goryeo. They are important data improving that the construction technologies of Baekjae continued to be applied to build stone or wooden pagodas, transcending time and space. Recently, the site assumed as a wood pagoda site of Hanseong area was examined in Gyeongdang sect ion of Pungnap mud fortification. If this is proved to be a real wooden pagoda site, this digging-up construction technology of foundation part ann be concluded to be a traditional engineering technology of Baekjae which was frequently used from Hanseong period to Sabi period. On the other hand, this digging-up construction technology of foundation part has been found only at pagoda sites and main building sites of temple ruins, and it helps examine their symbolism.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.7
• /
• pp.3502-3507
• /
• 2013

If a sky-bridge is rigidly connected to adjacent buildings, the irregularity of the connected structures is increased resulting in providing a worse seismic behavior. Therefore, a friction pendulum system (FPS) or lead rubber bearing (LRB) is frequently used for the connection system between a sky-bridge and building structures. These connection systems should be carefully designed to prevent a skyfall of a sky-bridge subjected to severe seismic loads. In this paper, the inevitable structural design procedures for a sky-bridge connection system using a friction pendulum system without uplift resistance capacity have been investigated. To this end, Nuri Dream Square building structure is used as a example structure. The structural design process of a friction pendulum system for fail safe of a sky-bridge has been proposed in this paper by evaluating structural responses of the sky-bridge and building structures subjected to earthquake loads.

• The Journal of the Korea Contents Association
• /
• v.14 no.3
• /
• pp.438-450
• /
• 2014

The statistical analyzing of environmental-friendly planning elements is getting important because it is getting concerned with the change of residential types and environmental friendly housing. However, in terms of the high-rise residential complex, paper about green building rating system and research about residential satisfaction to residents are lack. Therefore, this paper is analyzing of impotentness and satisfaction about housing subdivision, inside of building, facility, and maintenance. In addition, residential satisfaction(satisfaction, loyalty, preference) and impact relationship of environmental-friendly planning elements are analyzed by PLS structural equation. To sum up, first, improving of green building rating system in housing subdivision is impacted on loyalty if satisfaction was fulfilled. Second, increasing of environmental-friendly planning elements in inside of building is impacted on loyalty if both satisfaction and preference were fulfilled. Third, providing of green building rating system in facility and maintenance is analyzed as preference, but satisfaction hypotheses is not valued.

• Proceedings of the Korea Contents Association Conference
• /
• 2012.05a
• /
• pp.345-346
• /
• 2012

본 연구는 치과진료실의 실내 공기질에 영향을 미치는 요인과 종사자의 실내자각증상과 관련성을 조사하여 치과위생사 개인의 발전과 건강 증진에 필요한 기초자료를 마련하고자 본 연구를 시행하였다. 전국(서울, 경기, 대구, 포항)의 종합병원, 치과병원, 치과의원의 치과위생사 210명을 대상으로 2011년 10월 1일부터 20일까지 자기기입식 설문지 조사를 시행한 후 회수하여 응답이 불분명한 5명을 제외한 205명에 대해서 분석 하였다. 수집된 자료는 SPSS WIN 15.0 프로그램을 이용하여 분석하였다. 그 결과 근무 중 휴식시간 유무별로는 근무 중 휴식시간이 없는 치과위생사가 67.3%로 높은 분포를 보였고, 건물 밖 외출 여부별로는 때때로가 54.6%로 절반 이상을 차지하였으며, 건물 밖 외출횟수별로는 1회 86.1%로 대부분을 차지하였으며, 근무기관의 계절별 자연환기 정도별로는 봄, 여름, 가을, 겨울 모두 1일 2회 이내가 절반 이상을 차지하였으며, 다음으로 1일 4회 이내 19.0%, 기타 9.8%, 1일 10회 이내와 하루 종일 2.4% 순이었다. 실내자각증상 호소율에 대해 살펴본 결과는 4점 만점 중 전체 평균이 2.45로 나타났다. 먼저 영역별로는 평균이 '목증상'과 '눈증상'이 각각 2.54로 가장 높았으며, 문항 중에는 평균이 '눈이 잘 피로해진다'가 3.00으로 가장 높게 나타났다. 근무환경 특성에 따른 실내자각증상은 야간진료 여부별로는 야간진료를 하는 치과위생사가 그렇지 않은 치과위생사보다 실내자각증상이 낮았으며, 야간진료 여부에 따라 유의한 차이를 보였다(t=2.07, p<.05). 실내자각증상과 직무스트레스의 관계는 물리환경(r=.259, p<.001)과 직무요구(r=.311, p<.001), 관계갈등(r=.172, p<.05), 조직체계(r=.158, p<.05), 보상 부적절(r=.197, p<.01), 그리고 직무스트레스(r=.275, p<.001)와 통계적으로 유의한 상관관계를 보였다.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.27 no.6
• /
• pp.573-580
• /
• 2014

In this paper, axial strains and lateral displacements of columns in a 58-story reinforced concrete building were measured using vibrating wire gauge and laser scanner, respectively, and compared with predicted values. Predictions were obtained using ASAP, which is a 3D construction stage analysis program developed based on PCA report. Comparisons indicated that columns in the middle of floor plan showed good correlation with predictions. However, the columns in the corners showed some deviations. Lateral displacement of columns between measurement and estimation showed similar trends but considerable deviations, which are seemingly caused by construction error of column faces, and inaccuracy in differential vertical displacement prediction.