• Proceedings of the KIEE Conference
• /
• 2006.07b
• /
• pp.1043-1044
• /
• 2006

본 논문은 전동기의 일정한 공극자속과 전동기에 유입되는 무효전력을 이용한 매트릭스 컨버터 구동장치의 새롭고 간단한 센서리스 기법을 제안한다. 저속의 센서리스 성능 향상을 위해 정류지연, 스위칭장치들의 턴-온, 턴-오프시간 그리고 스위칭장치의 온-상태에서 전압강하와 같은 매트릭스 컨버터의 비선형성을 PQR 전력변환을 이용하여 모델링하고 기준 전류제어기법을 이용하여 보상한다. 3 kW급의 매트릭스 컨버터 구동시스템에 적용하여 제안된 센서리스 기법의 타당성을 검증한다.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.24 no.4
• /
• pp.1-9
• /
• 2010

An LED driving and control circuit has been developed. The LED driver has a new PWM circuit for current control of LED columns with dimming, current and thermal control, and communication functions. The PWM circuit is composed of two ring oscillator and one counter which can be constructed using basic digital logic components. In addition, it has the functions of remote control mode such as ON, OFF, emergency and power saving modes by the serial communication. The PWM generator and control circuit have been designed and fabricated 0.35[${\mu}m$] Magnachip/Hynix digital IC fabrication process. The LED driving and control board using the developed chip is fabricated and tested successfully.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2006.05a
• /
• pp.135-138
• /
• 2006

각종 현장 및 시설물에는 모터를 이용하여 작업하는 전기실 또는 기계실 등이 많이 있다. 이러한 경우, 모터를 제어하는 배전반의 일종인 모터제어센터(MCC)와 중앙통제실에는 데스크 판넬(desk panel)이 설치되며, 현장마다에는 각각의 로컬 판넬(local panel)이 설치되어 있다. 현재 이러한 구성요소들은 많은 유선으로 연결되어 있으며, 각각의 유니트(unit) 마다 나오는 접점신호의 온(on)/오프(off) 신호가 중앙통제실의 데스크 판넬에 전달되고 있다. 본 논문에서는 무선 LAN 환경에서 모터의 감시 및 제어를 위한 시스템에 관한 연구이다. 즉, 현장에서 근무자의 직접적인 모터의 동작 상태 확인 및 작동을 위한 불편함을 해소하기 위하여, 무선 LAN 환경을 통하여 모터제어센터의 감시 제어를 위한 시스템의 구현이다. 이를 위하여, 모터제어센터와 모터 감시 시스템(컴퓨터) 간의 데이터 전송을 위해서 무선 LAN의 블루투스 통신모듈을 이용한 RF 송 수신기 및 관리자를 위한 감시(모니터링) 프로그램을 구현하였다.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.43 no.1 s.307
• /
• pp.45-52
• /
• 2006

In this paper, authors propose a step-up converter of pulse width modulation (PWM) and power factor correction (PFC) by using a novel loss-less snubber. The proposed converter for a discontinuous conduction mode (DCM) eliminates the complicated circuit control requirement and reduces the size of components. The input current waveform in the proposed converter is got to be a sinusoidal form of discontinuous pulse in proportion to magnitude of ac input voltage under the constant duty cycle switching. Thereupon, the input power factor is nearly unity and the control method is simple. In the general DCM converters, the switching devices are fumed-on with the zero current switching (ZCS), and the switching devices must be switched-off at a maximum reactor current. To achieve a soft switching (ZCS and ZVS) of the switching turn-off, the proposed converter is constructed by using a new loss-less snubber which is operated with a partial resonant circuit. The result is that the switching loss is very low and the efficiency of converter is high. Some simulative results on computer and experimental results are included to confirm the validity of the analytical results.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.06a
• /
• pp.1784-1787
• /
• 2005

In this paper, proportional modulator which controls the second pressure of the pneumatic system was studied and proportional operating of modulator was gotten by two digital valves that have a fast dynamic characteristics and were controlled by PWM operating method. In order to more precision pressure control, this modulator consist of not only high speed two digital valves but also pressure sensor, measurement equipment and controller having a microprocessing function. In this study, for the development of the new proportional modulator, various research such as PWM control method, test equipment manufacturing, testing and evaluation were accomplished.

• Proceedings of the KIPE Conference
• /
• 2017.07a
• /
• pp.343-344
• /
• 2017

본 논문은 HVDC컨버터의 사이리스터 밸브 시험용 STC(Synthetic Test Circuit)의 전류원 특성을 개선하기 위한 제어기법을 제안한다. 기존의 저전압-대전류 회로의 보조스위치를 이용하여 사이리스터 밸브의 턴-오프 시 전류 하강 시간을 턴-온 시 전류 상승 시간과 유사하게 제어한다. 제안하는 기법에 대해 설명하고, 시뮬레이션을 통해 제안하는 기법의 타당성을 검증하였다.

• Proceedings of the KIPE Conference
• /
• 2018.11a
• /
• pp.59-61
• /
• 2018

본 논문에서는 입력전류를 센싱 받지 않아도 역률 보상을 하는 새로운 단일단 브리지리스 AC-DC컨버터를 제안한다. 제안하는 컨버터의 스위치는 전구간에서 ZVS(Zero Voltage Switching) 턴 온을 성취하며, 다이오드는 전구간에서 ZCS(Zero Current Switching) 턴 오프를 성취한다. 제안하는 컨버터의 넓은 범위의 출력전압 제어와 간단한 전력 제어를 위해 SDAB(Semi-Dual Active Bridge)기반의 모듈레이션 기법을 적용하였다. 1kW급 50kHz의 스위칭 주파수를 갖는 시작품을 통해 본 논문의 타당성을 검증하였다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.12
• /
• pp.16-22
• /
• 2020

The characteristics of the LCL filter for grid-connected inverters have been discussed in academia and industry. An online simulation tool was applied to compare and analyze the difference between the LCL filter and L filter. LCL filters were modeled and simulated using a range of professional simulation simulators, and the LCL filters were found to have good filtering effects for high-frequency harmonics. First, this paper summarizes the transfer functions of the LCL filter and provides the Bode plot diagram. The accuracy and validity of the filter attenuation characteristics were confirmed by a fast Fourier transform based on off-line simulation tools, such as PSIM and MATLAB, depending on the given parameters of the LCL filter. Finally, the Typhoon HIL402 real-time simulation was performed for hardware in the loop simulation to verify the actual filtering characteristics of the LCL filter.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.4 no.6
• /
• pp.523-530
• /
• 1999

This paper presents the on -line techniques of SHE-PvVI\I for GTO current source converter. The look-up t table is linearized with this proposed method so that the tum-on/off periods of the GTO switches can be c computed in real-time for any modulation index. This allows the rapid and continuous regulation of the DC O output current while producing the sinusoidal AC input current waveform and unity power factor. The l linearized S}lE-PW~I technique and the high power factor control scheme are Prolxlsed and their‘ performance i is tested analytically. The validity of this proposed technique is well verified through the simulation and e experimental results.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.45 no.8
• /
• pp.704-710
• /
• 2017

The supply of the liquid oxygen into a rocket combustor is simply controlled by the 'on' and 'off' positions of a main oxidizer shut-off valve. However, the partially opened position of a three-position valve can control and optimize the engine start transients by regulating the liquid oxygen flow rate during the start-up of the engine. In this paper, the design and performances of a three-position pneumatic poppet valve, which is intended to be employed in liquid rocket engines, have been presented.