• Proceedings of the Korea Concrete Institute Conference
• /
• 2009.05a
• /
• pp.265-266
• /
• 2009

To know the thermal-moisture condition of the concrete is very important to expect the concrete durability such as chloride attack, carbonation, alkali-aggregate reaction, freezing damage. The purpose of this study is to establish the temperature-moisture coupled model which is based on the finite element method and measure temperature and relative humidity under the exposured condition.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2021.05a
• /
• pp.197-198
• /
• 2021

The temperature and humidity inside concrete affects the depth of carbonation. In this study, the temperature and humidity inside concrete were predicted by the numerical method under the boundary conditions of ambient temperature, humidity, solar radiation, and wind. Using the results of the thermal humidity analysis, diffusion of carbon dioxide and the reaction of cement hydration products were calculated for carbonation depth.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2018.11a
• /
• pp.94-95
• /
• 2018

Prediction of compressive strength of concrete by Maturity Method is applied in construction site. However, due to the use of wired type high-priced equipment, economic efficiency and workability are falling. In this study, a newly developed concrete embedded wireless sensor is used to perform a mock-up test. Next, the concrete compressive strength of the Maturity Method is predicted using Saul and Plowman's function as measured temperature data. The predicted concrete strength at the beginning of the age was the actual strength and stiffness, but the error rate was less than 1% at 28th day.

• Food Engineering Progress
• /
• v.21 no.4
• /
• pp.312-317
• /
• 2017

Weight loss that influences quality and farmer incomes is affected by the storage environment of agricultural products. The interior of storage should be maintained at high humidity to prevent the weight loss of products which contain a lot of moisture. The research had constantly proceeded with change in the heat exchanger surface areas, humidity systems, and weight loss forecast to maintain high humidity within storage. Relative humidity that exerts an effect weight loss of crop is influenced by storage temperature, leak state, and volume of product. When weight loss is predicted, different conditions of these factors are derived. In case of CA storage, ways of forecasting the weight loss become easier compared to cold storage due to sealed storage with external environment during storage period. In this study, apples were stored in purge-type CA storage and weight loss has been predicted by using operating characteristics and environmental conditions. As a result, humidity variation in the storage fluctuates with the operation of the unit-cooler. Furthermore, unit-cooler operation factor is influenced by outside temperature and respiration heat. Prediction value of weight loss according to temperature and humidity has been most accurately predicted. Prediction value through defrosting water measured shows unit-cooler work quality. K-value needs verification to calculate the VPD method.

• Journal of the Korean Wood Science and Technology
• /
• v.43 no.6
• /
• pp.798-803
• /
• 2015

This study was conducted to predict the effect of door opening in wooden cultural heritages (WCHs) on their conservation environment. For this prediction, measured relative humidity (RH) and surface wood moisture content (MC) of inner part of wood columns in open wooden building and neighboring closed wooden building were compared with minimum RH, including the duration of minimum RH, and MC required for spore germination and resultant growth of wood-degrading fungi reported in some literatures. Moisture conditions, namely RH of inside wooden building and MC of wood was unsuitable for decay and sap-stain fungi all the year round; however, moisture conditions during summer season was suitable for spore germination and resultant growth of surface mold fungi, regardless of door opening. When compared, the duration of minimum (75%) or higher RH and the number of wood columns with MC level greater than the minimum MC (15%) during summer season, the surface mold related to the conservation environment of inside wooden building was somewhat better in open building than in closed building. Rather, doors should be opened in closed building for reducing indoor RH as a necessary measure during summer season when outdoor RH is high.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.36 no.8
• /
• pp.803-809
• /
• 2012

It is necessary to predict the heating load in order to determine the optimal scheduling control of district heating systems. Heating loads are affected by many complex parameters, and therefore, it is necessary to develop an efficient, flexible, and easy to use prediction method for the heating load. In this study, simple specifications included in a building design document and the estimated temperature and humidity are used to predict the heating load on the next day. To validate the performance of the proposed method, heating load data measured from a benchmark district heating system are compared with the predicted results. The predicted outdoor temperature and humidity show a variation trend that agrees with the measured data. The predicted heating loads show good agreement with the measured hourly, daily, and monthly loads. During the heating period, the monthly load error was estimated to be 4.68%.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.25 no.4
• /
• pp.446-454
• /
• 2023

The impact of climate change on agriculture is substantial, especially as global warming is projected to lead to varying temperature and humidity patterns in the future. These changes pose a higher risk for both crops and livestock, exposing them to environmental stressors under altered climatic conditions. Specifically, as temperatures are expected to rise, the risk of heat stress is assessable through the Temperature-Humidity Index (THI), derived from temperature and relative humidity data. This study involved the comparison of THI collected from 10 Korea Meteorological Administration ASOS stations spanning a 60-year period from 1961 to 2020. Moreover, high-resolution temperature and humidity distribution data from 1981 to 2020 were employed to generate high-resolution TH I distributions, analyzing temporal changes. Additionally, the number of days characterized by heat stress, derived from TH I, was compared over different time periods. Generally, TH I showed an upward trend over the past, albeit with varying rates across different locations. As TH I increased, the frequency of heat stress days also rose, indicating potential future cost increases in the livestock industry due to heat-related challenges. The findings emphasize the feasibility of evaluating heat stress risk in livestock using THI and underscore the need for research analyzing THI under future climate change scenarios.

• Smart Media Journal
• /
• v.8 no.1
• /
• pp.74-81
• /
• 2019

Recently, machine learning technology has had a significant impact on society, particularly in the medical, manufacturing, marketing, finance, broadcasting, and agricultural aspects of human lives. In this paper, we study how to apply machine learning techniques to foods, which have the greatest influence on the human survival. In the field of Smart Farm, which integrates the Internet of Things (IoT) technology into agriculture, we focus on optimizing the crop growth environment by monitoring the growth environment in real time. KT Smart Farm Solution 2.0 has adopted machine learning to optimize temperature and humidity in the greenhouse. Most existing smart farm businesses mainly focus on controlling the growth environment and improving productivity. On the other hand, in this study, we are studying how to apply machine learning with respect to harvest time so that we will be able to harvest fruits of the highest quality and ship them at an excellent cost. In order to apply machine learning techniques to the field of smart farms, it is important to acquire abundant voluminous data. Therefore, to apply accurate machine learning technology, it is necessary to continuously collect large data. Therefore, the color, value, internal temperature, and moisture of greenhouse-grown fruits are collected and secured in real time using color, weight, and temperature/humidity sensors. The proposed FPSML provides an architecture that can be used repeatedly for a similar fruit crop. It allows for a more accurate harvest time as massive data is accumulated continuously.

• Proceedings of the Korean Association of Geographic Inforamtion Studies Conference
• /
• 2008.06a
• /
• pp.465-470
• /
• 2008

우리나라는 산림은 단순림이 많고 밀도가 높기 때문에 산불이 한번 발생하면 대형 산불로 확산될 우려가 크다. 이 때문에 산불 발생을 미리 예측하여 대응할 필요가 있다. 산불 발생예측을 위해서는 산불 발생에 영향을 미치는 인자와 산불 발생의 관계를 파악하는 것이 중요하다. 본 연구는 1997년부터 2006년까지 발생한 전국에서 발생한 산불의 point data를 이용하였다. 산불 발생 지점의 지형인자와 지리인자, 그리고 산불 발생 당시의 기상인자로 DB를 구축하고 산불 발생과의 관계를 구명하였다. 지형인자 분석은 고도, 방위, 경사에 따른 산불 발생 빈도를 분석하였고, 그 상관관계를 분석하였다. 지리인자 분석에서는 인구밀도, 산불 발생지역의 접근성(도로에 따른 접근성, 대도시와의 거리에 따른 접근성)에 대한 산불 발생의 상관관계를 분석하였다. 기상인자와 산불 발생의 관계는 전국 76개소에서 관측된 온습도 데이터를 보간한 자료와 산불 발생과의 관계를 분석하였다. 기상인자 분석은 산불이 가장 빈번하게 발생하는 3월 하순, 4월 초순, 4월 중순 자료를 평균하여 산불 발생 빈도와의 상관관계를 분석하고 산불 발생 위험지역을 도출하였다. 본 연구를 통해서 각 인자와 산불 발생의 관계를 분석해보았다. 하지만 각 인자간의 관계를 분석하지 못한 것이 한계점이라고 할 수 있다. 차후 연구에서는 각 인자간의 관련성을 분석하고 산불 발생의 원인과 인자간의 구체적인 인과관계를 밝히는 것도 필요할 것으로 보인다.

• Journal of the Microelectronics and Packaging Society
• /
• v.20 no.3
• /
• pp.7-10
• /
• 2013

This study presents an approach to predict insulation resistance failure of multilayer ceramic capacitors (MLCCs) using non-linear modeling. A capacitance aging model created by non-linear modeling allowed for the prediction of insulation resistance failure. The MLCC data tested under temperature-humidity-bias testing conditions showed that a change in capacitance, when measured against a capacitance aging model, was able to provide a prediction of insulation resistance failure.