• Korean Chemical Engineering Research
• /
• v.57 no.1
• /
• pp.11-16
• /
• 2019

$La_{0.6}Sr_{0.4}Ti_{0.3}Fe_{0.7}O_{3-{\delta}}$(LSTF) coated $Ba_{0.5}Sr_{0.5}Co_{0.8}Fe_{0.2}O_{3-{\delta}}$(BSCF) membranes which has properties of high oxygen permeability and stability to $CO_2$ were applied to a bench scale apparatus to conduct oxygen permeation experiments. Also, the membranes of the laboratory and the bench scale device were divided into three regions according to the temperature gradient in the membrane reactor for comparative analysis. While oxygen permeation experiment were conducted up to $900^{\circ}C$, temperature dependence of Cr deposition was investigated. As a result, it was confirmed that the oxygen permeability was $2.37ml/min{\cdot}cm^2$, which was significantly lower than $3.79ml/min{\cdot}cm^2$ measured in the laboratory apparatus. It was found through XRD and SEM/EDS analysis that the decrease in oxygen permeability was originated from the deposition of gaseous Cr on the membrane surface released from the alloy material of the housing. In particular, a large amount of Cr was found in the medium temperature region.

• Membrane Journal
• /
• v.26 no.6
• /
• pp.449-457
• /
• 2016

In this study, polyvinylidene fluoride (PVDF) membrane with excellent mechanical properties and chemical resistance was prepared and characterized for the application of water treatment. Dibutyl-phthalate (DBP) was used as a diluent for making a membranes through temperature induced phase separation (TIPS) method, and the crystallization temperature, melting point, cloud point and SEM image were observed with different ratio of diluent in polymer/diluent mixture. The crystallization temperature and melting point increased proportionally with the content of polymer, while the cloud point temperature decreased. Finally, it was confirmed that stable membrane could be manufactured at a polymer content of 62 wt% and a temperature $125^{\circ}C$ using the phase diagram of PVDF/DBP mixtures with temperatures.

• Proceedings of the KAIS Fall Conference
• /
• 2012.05b
• /
• pp.662-664
• /
• 2012

본 논문에서는 단류형 볼텍스 튜브를 설계 및 제작하였으며, 에너지 분리특성 실험을 수행하였다. 세퍼레이션 튜브의 길이 변화에 따른 에너지 분리 특성의 영향을 실험적으로 분석하였다. 세퍼레이션의 위치는 매우 중요한 성능 변수 중의 하나이며, 세퍼레이션의 길이가 길어질수록 저온측 온도차는 전체적으로 온도차가 감소하는 경향을 보이나, 고온측 온도차는 저온측에 비해 미비한 온도차를 보이고 있다.

• Food Science and Preservation
• /
• v.17 no.1
• /
• pp.165-168
• /
• 2010

It is known that temperature during solid fermentation using rice bran is increased upto 60-70 degree. To investigate the major microflora regarding temperature maintenance of rice bran bathing, we first isolated predominant microbes using various media by a limiting dilution method. The RNA of isolated strains were purified and sequenced. The rRNA sequencing revealed that the selected strains were similar to Bacillus coagulans according to their taxonomical relationships. Together, these results indicate that Bacillus coagulans is a major kind of microflora during solid fermentation using rice bran.

• Journal of Energy Engineering
• /
• v.7 no.1
• /
• pp.44-56
• /
• 1998

Separate heat pipe exchanger is considered as the high thermal transportation equipment, because evaporator and condenser are separately positioned in the long distance. Its characteristics are that the working fluid is circulated naturally by the position height of two exchangers. But the operating characteristics are restricted by the temperature of hot and cold fluid, flow pattern and diameter of vapor line, etc. in this study, the vapor pressure and the minimum height of two exchangers are studied about the factors restricting the operating characteristics.

• Proceedings of the Membrane Society of Korea Conference
• /
• 1997.10a
• /
• pp.79-80
• /
• 1997

1. 서론 : 열유도 상분리법(TIPS)은 일반적으로 상온에서 적정용매가 없는 고분자 소재를 아용하여 고분자-희석제 2성분계의 혼합물을 적절한 냉각 속도로 상분리 온도 이하로 급냉시켜 연속상과 분산상의 상분리를 일으킨 후 matrix전체에 다공성을 부여하여 분리막을 제조하는 공정이다. 폴리올레핀계 고분자를 중심으로 나일론11. 폴리카보네이트, PVC, ABS 수지 등을 소재로 plasmapheresis, 인공심폐기, breathing wear 등의 용도로 많이 응용되어 왔으며 현재 한외여과나 정밀여과 등 수투과 공정 및 battery separator 등으로의 응용이 활발하게 연구되고 있다. TIPS공정에 의해 제조된 고분자 분리막은 기존의 분리막에 비해 내열성 및 내약품성이 우수하며 여러 가지 다양한 변수로 부터 막의 미세구조를 조절할 수 있어 기공의 크기 및 모양이 조절 가능하다. 본 연구에서는 TIPS 공정을 이용한 고분자 분리막의 제조시 take-up speed와 air gap 등을 변화시켜 이에 따른 영향을 조사하였고 또한 cold stretching에 의한 구조변화를 알아보았다.

• Proceedings of the Korean Vacuum Society Conference
• /
• 1999.07a
• /
• pp.179-179
• /
• 1999

Cu3AU(100) 단결정은 fcc 구조를 가지고 있으며 (100)면은 Cu와 Au가 1:1로 존재하고 가운데(200)면은 Cu만 존재한다. 따라서 Au 층은 (100)면에서만 존재하여 각 Au층은 서로 0.5nm 떨어져 있다. 이와 같은 Cu3Au(100) 단결정을 MEIS(Medium Energy Ion Scattering Spectroscopy) 실험 장비를 사용하여 0.35nm 떨어져 있는 Single unit cell의 윗면과 아래면, 즉 첫 층의 Au와 셋째층의 Au의 층분리를 통해서, 온도 변화에 따른 Cu3Au(100) 단결정의 표면 물리적 현상인 surface induced disorder을 밝혀내고자 한다. 우선 두 Au층의 분리 시도는 수소이온을 이용한 실험 조건에서는 extremely glancing exit angle 등 극한의 산란조거에서도 성공하지 못하였다. 깊이 분해능을 정해주는 electronic energy loss를 극대화하기 위해 수소이온이 아닌 질소 이온을 사용하여 energy spectra를 측정해 본 결과 아래 그림에서와 같이 표면 Au 층과 표면 셋째 Au층을 구분할 수 있었다. <110>으로 align된 조건에서는 셋째층의 Au 원자들이 완전히 shadow cone 내부에 존재하여 관측되지 않지만 9.75$^{\circ}$ tilt 한 경우 셋째층의 Au 원자들이 shadow cone 바깥으로 나오게 되어 그림에서와 같이 첫째 층과 셋째 층이 확실히 분리되어 측정되었다. 이를 바탕을 Cu3Au(100)의 온도변화에 다른 order disorder and segregation 현상을 측정하였다. ordered Cu3Au(100)은 28$0^{\circ}C$ 근처에서 surface층이 먼저 disordered상으로 바뀌는 surface induced disorder 현상이 일어나고 bulk transition 온도 39$0^{\circ}C$ 이하에서 R.T으로 온도를 낮추면 본래의 ordered 구조로 되돌아간다. 하지만 bulk transition 온도를 지나면 order-disorder transition이 비가역적이고 segregation 현상이 일어난다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.1
• /
• pp.55-60
• /
• 2010

Vortex tube is the device that can separate small particles from the compressed gas, as well as compressed gas into hot and cold flow. Due to energy separation ability, a vortex tube can substitute for an EGR cooler of the automotive engine. In this study, experimental approach has been performed to analyze the energy separation characteristics of the vortex tube. Energy separation characteristics of the vortex tube has been tested for supply pressure, cold-out pressure, and hot-out pressure. As increasing supply pressure, energy separation effect increased. Maximum temperature exists about 0.85 of the cold-out-flow-ratio, and minimum exists about 0.35. Hot-out temperature of the vortex tube is affected by the hot-out and cold-out pressure. However, for the given conditions, cold-out temperature is independent of exit pressure change. The results from this study can be used for the basic design parameter of the EGR cooler substitute of an automotive engine.

• Membrane Journal
• /
• v.33 no.6
• /
• pp.369-376
• /
• 2023

In this study, the alternative to the energy-intensive conventional vacuum distillation process, an eco-friendly and energy-efficient pervaporation separation was employed in 1,2 hexane diol/water (HDO/water) mixture. The crosslinked PVA-glutaraldehyde was coated inside the alumina hollow fiber membrane (Al-HF). In the HDO/IPA pervaporation separation, optimization of the membrane concerning PVA/GA ratio, curing temperature, and pervaporation operating condition were performed. In the long-term stability test, the sustainable pervaporation separation performance giving flux in the range of 1.90~2.16 kg/m²h, and water content in permeate was higher than 99.5% (separation factor = 68) was obtained from the PVA/GA (molar ratio = 0.08, curing temperature = 80℃) coated Al-HF membrane from HDO/water (25/75, w/w, %) mixture at 40℃. Therefore, this work provides potential and inspiration for PVA-based membranes to mitigate excessive energy requirements in HDO/water separation by pervaporation.

• KSBB Journal
• /
• v.14 no.1
• /
• pp.17-23
• /
• 1999

Studies were carried out to elucidate the effects of pressure, temperature and mobile phase composition on supercritical $CO_2$ chromatographic separations of paclitaxel, baccatin III, 10-deacetyl baccatin III, 7-epi-10-deacetyltaxol, cephalomanine, and 10-deacetyltaxol. High resolutions of paclitaxel, 10-deacetylbaccatin III, 10-deacetyltaxol were observed with optimized pressure, temperature, and mobile phase composition. The highest resolution between paclitaxel and 10-deacetylbaccain III was observed at 275 kg/$\textrm{cm}^2$, $40^{\circ}C$ with the mobile phase composition of gradient mixture of 3.9-3.6 mL/min $CO_2$, 0.1-0.4 mL/min methanol for 20 min. Resolutions of baccatin III, capalomannine, and 7-epi-10-deacetyltaxol were found to be low in this study. On-line coupled SFE/SFC process was applied to isolate paclitaxel from yew tree powder. As a consequence, paclitaxel with a purity of 95% was obtained with a recovery yield of 38%.