• 제목/요약/키워드: 온도 보상

검색결과 417건 처리시간 0.036초

KSTAR 대전력 설비 현황 및 운전결과 분석 (Electric power facility status and analysis of operation results for Korea Superconducting Tokamak Advanced Research)

  • 공종대;홍성록;황인성;김양수;엄대영
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2009년도 제40회 하계학술대회
    • /
    • pp.85_86
    • /
    • 2009
  • 핵융합반응은 초고온의 플라즈마 상태에서 가벼운 원자핵들이 융합하여 무거운 원자핵으로 바뀌는 현상으로, 이 과정에서 감소된 질량이 막대한 에너지로 변환되는데 이를 핵융합에너지라고 한다. 핵융합에너지는 인류의 에너지 위기를 극복할 수 있는 최적의 대체에너지이며, 무한, 청정, 고효율에너지이다. 이에 국가핵융합연구소(NFRI)는 Green Energy 의 개발과 핵융합에너지 상용화 기술을 개발하기 위해 핵융합연구장치인 KSTAR(Korea Superconducting Tokamak Adavanced Research)를 제작하여 장치의 운전연구 및 기술 확보에 힘을 쏟고 있다. 또한 핵융합 관련 파생기술을 활용한 첨단 신사업 창출에 기여하고 있다. 본 논문에서는 KSTAR 1st Plasma 실험 시 KSTAR 장치에 전력을 공급하기 위한 전력설비 현황, 전력품질분석, 전력사용량 분석을 통해 향후 KSTAR 장치 운전을 위해 필요한 수전설비 증설, 무효전력보상장치 증설 등과 같은 전력계통의 효율화와 안정화를 위한 개선사항에 대해 기술하였다.

  • PDF

온도보상을 고려한 열선형 공기유량 측정시스템에 관한 실험적 연구 (Experimental study on hot-wire type air flow rate measurement system considering ambient temperature compensations)

  • 이민형;유정열;김사랑;고상근;윤준원;김동성
    • 오토저널
    • /
    • 제13권4호
    • /
    • pp.62-75
    • /
    • 1991
  • The purpose of this study is to perform modelings and experiments to measure air flow rate using hot-wires and a CTA(Constant Temperature Anemometer). The flow rate can be obtained by measuring the heat loss of the hot-wire due to the variations of flow velocity when the hot-wire is maintained at uniform temperature. But the defect of this method is that the output signal changes not only by the flow rate but also by the ambient temperature. Thus, in the present study, a method which compensates the variations of the ambient temperature has been introduced to measure exact flow rate. To be more specific, the bridge circuit of the usual hot-wire anemometer system has been modified in such a way that a temperature resistance sensor and a variable resistance are placed in one of the legs to compensate the different temperature coefficients of both the hot-wire and the temperature compensating resistance for flow velocity or for flow mass up to the flow temperature of 50 .deg.C. Comparing the modeling and experimental results, it has been shown that the compensating point differs as the flow rate varies. Therefore, optimum compensation points are sought to construct the circuit. The present modeling and experimental results may be applied to the design of actual air flow meters for automobiles.

  • PDF

상온기체 모사장치를 이용한 가변추력 고체추진기관의 압력제어 연구 (A Study on Pressure Control for Variable Thrust Solid Propulsion System Using Cold Gas Test Equipment)

  • 이호성;이도윤;박종승;김중근
    • 한국항공우주학회지
    • /
    • 제37권1호
    • /
    • pp.76-81
    • /
    • 2009
  • 본 논문에서는 가변 추력 고체추진기관을 모사할 수 있는 상온기체 시험장치를 이용하여 고체추진기관의 연소실 압력을 능동적으로 제어할 수 있는 비선형 압력 제어알고리듬을 제안하였다. 제안된 제어기법은 고체추진기관의 비선형성과 시변성을 고려하여 설계되었으며, 압력 및 온도조건 등에 따른 물리적 변수들의 변화를 적응제어 알고리듬을 통하여 보상하였다. 비선형 압력제어 알고리듬의 효과를 상온기체 모사장치를 이용한 압력제어 실험을 통하여 검증하였으며, 실험결과 일반적인 비례 제어기 및 비례-적분 제어기에 비하여 제안된 제어기법이 더 좋은 압력제어 성능을 보임을 확인하였다.

초기 궤도운용 분석 기반 저궤도 지구관측위성 추진시스템 성능 검증 (Performance Verification of LEO Satellite Propulsion System based on Early On-orbit Operation Analysis)

  • 원수희;채종원;김수겸;조성권;전형열
    • 한국위성정보통신학회논문지
    • /
    • 제11권1호
    • /
    • pp.58-62
    • /
    • 2016
  • 인공위성 추진시스템은 위성이 발사체와 분리되어 최종 임무궤도에 진입하기까지 궤도조정에 필요한 추력을 제공하고, 임무궤도에 진입한 이후에는 궤도경사각 제어 및 항력에 의한 궤도 저하를 보상하기 위한 추력을 제공한다. 위성 발사 후 초기운용 기간 동안 획득된 궤도운용결과를 바탕으로 위성의 운용모드에 따른 저궤도관측위성 추진시스템의 궤도성능 검증을 수행하였다. 또한 추진시스템을 구성하는 부품 및 배관에서의 온도변화 추이를 살펴 추진계가 정상적인 범위 내에서 운용되고 있음을 확인하였다.

Bi0.5(Na0.84K0.16)0.5TiO3 세라믹스로 보상된 AT-cut 수정 공진자의 주파수 온도특성 (Frequency-temperature Characteristics of AT-cut Crystal Resonator Compensated by Bi0.5(Na0.84K0.16)0.5TiO3 Ceramics)

  • 오동언;문경현;류주현
    • 한국전기전자재료학회논문지
    • /
    • 제18권7호
    • /
    • pp.610-614
    • /
    • 2005
  • In this paper, simple AT-cut crystal resonator utilizing $Bi_{0.5}(Na_{0.84}K_{0.16})_{0.5}TiO_3$ relaxator ceramics as load capacitator were designed and their frequency-temperature characteristics were investigated. In order to modify temperature dependance of dielectric constant, $Bi_{0.5}(Na_{0.84}K_{0.16})_{0.5}TiO_3$ ceramics were manufactured with the variations in Sr substitution. At the composition with $6\;mol\%$ Sr substitution as load capacitator, frequency-temperature characteristics of AT-cut crystal resonators with the series load capacitance were similarly varied as those of cut orientation variation, and also compensated.

신경망을 이용한 HSLA 강의 고온 유동응력 예측 및 통계방법과의 비교 (A Comparative Study of Material Flow Stress Modeling by Artificial Neural Networks and Statistical Methods)

  • 천명식;이준정
    • 대한기계학회논문집A
    • /
    • 제21권5호
    • /
    • pp.828-834
    • /
    • 1997
  • The knowledge of material stress-strain behavior is an essential requirement for design and analysis of deformation processes. Empirical stress-strain relationship and constitutive equations describing material behavior during deformation are being widely used, despite suffering some drawbacks in terms of ease of development, accuracy and speed. In the present study, back-propagation neural networks are used to model and predict the flow stresses of a HSLA steel under conditions of constant strain, strain rate and temperature. The performance of the network model is comparedto those of statistical models on rate equations. Well-trained network model provides fast and accurate results, making it superior to statistical models.

헬리콘 플라즈마 원을 이용한 우주 추진체의 특성 (Characterization of the space propulsion system with a helicon plasma source)

  • 최근식;우현종;정규선;이명재;노태협;정용호
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2005년도 추계학술대회 논문집 전기물성,응용부문
    • /
    • pp.93-95
    • /
    • 2005
  • VASIMR (Variable Specific Impulse Magnetoplasma Rocket: JSC, NASA)의 개념을 바탕으로 하는 K2H (KBSI-KAIST-Hanyang University)라고 이름 붙여진 우주 추진체 모사장치 (Space Propulsion Simulator)를 개발하였다. 이 장치는 헬리콘 플라즈마 소스, 이온 가열부 (ICRH: Ion Cyclotron Resonance Heating), 자기노즐 부분으로 이루어져 있다. 헬리콘 플라즈마 소스는 m=+1 형태의 Right-helical 안테나를 사용하여 발생하였다. 본 연구에서는 K2H 장치의 기본적인 설계 개념 및 초기에 발생한 헬리콘 플라즈마의 물성을 RF 보상탐침을 이용하여 측정하였다. 그 결과 900 W, 13.56 MHz rf파워를 사용하여, 아르곤 7 mTorr하에서 전자밀도 = $10^{12}-10^{13}cm-3$, 전자온도 = 4-6 eV의 헬리콘 플라즈마를 안정적으로 발생시켰다.

  • PDF

한국기업의 연봉제가 기업내 임금격차에 미치는 영향에 대한 연구 (Performance Based Pay and Pay Dispersion within Firm: The Korean case)

  • 김재구;김동배
    • 노동경제논집
    • /
    • 제34권2호
    • /
    • pp.29-52
    • /
    • 2011
  • 본고는 1990년대 후반 이후 한국기업에 급속히 도입되어 온 연봉제가 실제로 성과에 따른 임금격차를 가져왔는지에 대하여 분석하였다. 노동부 "임금구조기본통계조사" 1996년부터 2006년까지 100인 이상 기업 대졸 사무직에 대한 자료를 활용하였고, 기업내 임금격차 변수로는 개인 속성에 대한 영향을 배제할 수 있도록 임금함수를 추정하고 잔차의 분산을 기업수준의 변수로 활용하여 분석하였다. 분석 결과, 연봉제의 도입은 기업내 임금격차를 확대시키는 것으로 나타났다. 그러나 연봉제 적용 비중과 임금격차 간의 관계는 비선형관계($\bigcap$)임을 시사하는 결과가 나타났다.

  • PDF

60GHz대역 무선통신장애 해결을 위한 온도보상장치 개발 (The Development of the Temperature Compensation Equipment to minimize Error in the Wireless Transmission System at 60GHz Band)

  • 명병수;구성득
    • 한국산업융합학회 논문집
    • /
    • 제8권2호
    • /
    • pp.97-104
    • /
    • 2005
  • Usually, propagation attenuation of millimeter wave occurs by rainfall, snowfall, temperature, effect of pressure of air. In 60GHz wave band wireless communication network, temperature change becomes big factor of propagation loss department. Also, temperature change causes disturbance of 60GHz frequency at transceiver. In this study, we used 60GHz transceiver and found propagation loss of wireless path and operating frequency disturbance characteristics. In transceiver that there is no temperature compensated device, operating frequency of TX changed by 60.865GHz at temperature of $-5^{\circ}C$, and appeared by 60.730GHz when is $50^{\circ}C$. Therefore, operating frequency change width by temperature change are about 100MHz, greatly. But, in transceiver that there is temperature compensated device, operating frequency of TX changed by 60.830GHz at temperature of $-5^{\circ}C$, and appeared by 60.710GHz when is $50^{\circ}C$. Therefore, operating frequency change width by temperature change are about 20MHz. According to these result, we constructed between buildings examination wireless site for point to point wireless communication using 60GHz band transceivers who have do temperature compensated device, and investigated data transmission characteristics about ambient temperature change. Therefore, if use transceiver that have temperature compensated device, may overcome the wireless transmission error in 60GHz band wireless communication LAN networks despite of ambient temperature change.

  • PDF

다층지반 탐지를 위한 광섬유 마이크로콘의 개발 (Development of FBG Micro Cone Penetrometer for Layered Soil Detection)

  • 김래현;이우진;윤형구;이종섭
    • 한국지반공학회:학술대회논문집
    • /
    • 한국지반공학회 2009년도 춘계 학술발표회
    • /
    • pp.341-348
    • /
    • 2009
  • Various types of micro cone penetrometers have been developed by using strain gages for the layered soil detection. Strain gages, however, are affected by several factors such as temperature, self heating and lead wire length. In this study, micro cone penetrometers with 3~7mm in diameter, are developed by using FBG sensor to overcome the defects of the strain gage, and compensate the effect of temperature during penetration. In order to verifiy the accuracy and reliability of the developed FBG cone, the cone penetration test is performed on the layered soil. The tip resistance of FBG snesor shows excellent sensitivity, and can detect the interface of the layered soils with higher resolution. In addition, the 3mm micro cone penetrometer which is impossible cone diameter by using strain gages presents much higher sensitivity than the 7mm cone penetrometer. This study suggests that FBG sensor is a useful sensor for manufaturing the ultra small sized cone, and effectively detects the interface of the layered soil.

  • PDF