• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2012.05a
• /
• pp.515-519
• /
• 2012

A numerical study was performed to observe the relation between internal flow characteristics and operating temperatures in a Lapple cyclone. The present numerical results agree reasonably well with previous experimental and numerical results. As the operating temperature increases, the pressure drop decreases due to decrease of wall shear stress and tangential velocities. A detailed comparison of pressure drops in the cyclone between theoretical prediction models and the present numerical simulations is also presented for wide range of operating temperatures.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.12
• /
• pp.723-729
• /
• 2016

This study compared fin-tube and parallel-flow heat pipes for their sensible heat exchange rate, heat recovery amount, and air-side pressure drop. Tests were done with different refrigerant charging rates of 40-60% vol. and air flow rates of 300-1,400. The sensible heat exchange rate was highest for both types of heat pipes at a working fluid charge of 40% vol. and low flow rate. For the parallel-flow heat pipe, the 60% vol. charge is too high and results in a low sensible heat exchange rate. The reason is that the thicker liquid film of the tube wall deteriorates the heat transfer effect. Hence, the optimal charging rate is 40 to 50% vol. The evaporator heat pipe has a larger air-side pressure drop than the condenser section heat pipe. The reason is considered to be condensation water arising from the evaporator surface. Compared to the fin-tube heat pipe, the parallel-flow heat pipe showed better performance with a working fluid charging rate of 48%, volume of 41%, and an air-side pressure drop about 37%.

• JOURNAL OF ELECTRICAL WORLD
• /
• s.300
• /
• pp.72-77
• /
• 2001

분산형전원은 대개의 경우 단독으로 운전되는 것이 아니라 계통과 연계되어 수요전력과 발전전력의 과부족 조정을 위해 사용된다. 현재 일본의 배전계통은 수용가에 대하여 1방향의 조류를 전제로 구성되어 있기 때문에 계통과 연계하는 경우 분산전원측이 계통에 악영향을 미치지 않도록, 역으로 계통측의 사고 등에 의해서 분산형전원과 부하에 악영향을 미치지 않도록 특별한 배려가 필요하게 된다. ''系統運系技術要件가이드라인''은 이 때문에 기술요건을 저압선에서 특별고압선까지 연계되는 계통별로 제시하고 있으며 특히 보호장치에 대하여 규정하고 있다. 계통연계기술요건가이드라인은, 분산형전원을 도입하기 쉽고 사회적 요청과 기술혁신에 맞도록 개정되어 왔으며, 최근 증가된 반도체식 역변환장치를 통하여 분산형전원도 도입하기 쉽도록 개정되어 온 것이다. 다른 한편으로는 계통사고나 순시 전압강하로부터 분산형전원과 부하를 보호한다든지 또한 더욱 적극적으로 분산형전원을 순간전압강하대책으로 활용하기 위하여 계통과의 연계를 고속으로 분리하는 고속해열장치가 많이 사용되게 되었다. 기계식고속차단기와 고속릴레이의 조합으로 중요부하의 순간전압강하를 1사이클 이하로 할 수 있다. 분산형전원을 더욱 활용하여 큰 역조류도 가능하게 하기 위해서는 현재의 배전보호시스템으로는 한계가 있어, 집중감시제어방식을 사용한 새로운 배전보호시스템에 대한 연구가 시작되고 있다.

• Proceedings of the Korean Society for Applied Microbiology Conference
• /
• 1986.12a
• /
• pp.531.1-531
• /
• 1986

L. acidophilus를 대두유에 젖산발효 시킬 때 단독배양과 효모인 K. fragilis와의 혼합배양에 대하여 검토하였다. 젖산의 생성량은 젖산균 단독배양보다는 효모와 혼합배양 하는 것이 2.6배나 많았으며 L. acidophilus를 단독배양 하였을 경우 균의 생육속도와 PH 강하속도는 K. fragilis를 단독배양한 것에 비교하여 늦었다. 그러나 혼합배양 함으로써 생육속도와 PH 강하속도는 K, fragilis를 단독배양한 것보다 빨랐다. 단독 또는 혼합젖산발효에 미치는 온도의 영향을 조사한 결과는 L. acidophilus.는 37$^{\circ}C$, K. frahilis는 3$0^{\circ}C$, 두 균의 혼합배양시는 35-37$^{\circ}C$ 범위에서 산생성이 가장 좋았다. 혼합배양 시 검토한 젖산발효 최적조건은 L. acidophilus와 K. fragilis의 접종비율이 1:5, sucrose 0.5-1.0% SKIMMILK 1.5%를 각각 첨 가한 것이 좋았다.

• Journal of Advanced Marine Engineering and Technology
• /
• v.27 no.7
• /
• pp.872-878
• /
• 2003

As the results of recent industrial development, many industrial plants and marine structures are exposed to severe corrosion environment than before. Especially, under the wet environment, crevice corrosion damage problems necessarily occur and encourage many interests to prevent them. In this study, the electrochemical polarization test was carried out to study characteristics of crevice corrosion for AISI 304 stainless steel in various solution temperatures. The results are as follows ; 1) as the solution temperature increased in IN $\textrm{H}_2\textrm{SO}_4$, the passive current density and critical current density were increased, whereas corrosion potential and break down potential were nearly constant, 2) as the solution temperature increased. the induced time for initiation of crevice corrosion was shortened. 3) The potential range in the crevice was -220mV/SCE to -380mV/SCE according to the distance from the crevice opening, which is lower than that of external surface of -200mV/SCE.

• 한국태양에너지학회:학술대회논문집
• /
• 2012.03a
• /
• pp.376-381
• /
• 2012

Natural gas is converted in to LNG by chilling and liquefying the gas to the temperature of $-162^{\circ}C$, when liquefied, the volume of natural gas is reduced to 1/600th of its standard volume. This gives LNG the advantage in transportation. The pressure dorp of the cascade liquefaction cycle was investigated and simulated using HYSYS software. The simulation results showed that the pressure drop in the LNG heat exchanger is set to 50 kPa considering the increase in the compressor work of cryogenic cascade liquefaction cycle.

• Korean Journal of Materials Research
• /
• v.5 no.3
• /
• pp.261-267
• /
• 1995

IN 617의 시편으로 1073K의 온도와 107과 180 MPA의 응력에서 $\varepsilon$=0.18까지 정압크\ulcorner을 한 직후 107 MPa로 응력을 낮추고 (응력강하시험), 또 다른 시편에는 180 ↔ 0.2 MPa의 응력으로 각각 17초씩 반복주기변형을 수행하여 정압크\ulcorner 변형시의 크\ulcorner곡선과 비교를 하엿다. 그 결과 IN 617 의 반복주기변형에서는 변형속도둔화(CCD)가 발생함을 알 수 있었고, 응력강하와 반복변형시험은 모두 거의 같은 모양의 회복 크\ulcorner곡선을 나타내었다. 이러한 회복 크\ulcorner은 아결정립크기와 자유전위밀도로서 그 회복기구를 설명할수 있었다.

• Applied Chemistry for Engineering
• /
• v.8 no.6
• /
• pp.985-993
• /
• 1997

The effects of CaO and MgO fluxes on the fusibility of fly-ashes were investigated for two different fly-ashes. A fusion temperature of mixtures of selected fly-ashes and fluxes were measured by the ASTM test method(D1857) and the differential thermal analysis. IDT of these samples added CaO and MgO as a fluxing agent dropped in the range of 114 to $294^{\circ}C$ and 80 to $224^{\circ}C$, respectively. Compared with ash fusion temperature to Base/Acid ratio, the lowest ash fusion temperature were measured in the range of 0.7 to 0.8 for CaO-fly ash mixtures and 0.3 to 0.4 for MgO-fly ash mixtures. As a result, MgO in small addition acted as a more effective flux than CaO. A conventional Base/Acid ratio and liquidus point of ternary diagram did not show a good correlation with ash fusion temperature for these samples. In pure fusion temperature of fly ash-mixtures, DTA was better method than ASTM test method.

• Clean Technology
• /
• v.20 no.3
• /
• pp.263-268
• /
• 2014

Using the CFD method, the pressure drop in 6 cyclone dust collectors of different shape were calculated. And the results were compared with results of the conventional theories. Equations of Shepherd and Lapple (1939, 1940), First (1950), Alexander (1949), Stairmand (1949), Barth (1956) were used in the theoretical calculation. In CFD calculations, we used standard k-epsilon model for analysis of turbulent flow, fluid is $25^{\circ}C$ air, the velocity at inlet is 10 m/s and the temperature is $25^{\circ}C$. In CFD analysis results, the pressure distributions along the flow showed similar patterns in different cyclone shapes. But the pressure drop distributions estimated on the conventional theories had big difference in different cyclone shapes. Only First's theory and CFD analysis showed similar results.

• Journal of the East Asian Society of Dietary Life
• /
• v.12 no.5
• /
• pp.364-369
• /
• 2002

Mulberry leaves are believed to be a potent inhibitor of intestinal $\alpha$-glycosidase and the digestion of sucrose in the small intestine. Mulberry leaves are also blown to help prevent the postprandial hyperglycemia. The objective of this study was to elucidate the functionality and anti-hyperglycemic effect of mulberry leaves, and to develop a functional drink using mulberry leaf, silk peptide and oriental medicine. Several mixtures of mulberry lear extract silk peptide and oriental medicine were made for the purpose of manufacture and formulation of products. These mixtures were tested to check the $\alpha$-glycosidase inhibition effect to find the best formula. The optimum conditions for a mulberry leaf hot water extract were that the size of leaf was under 3mm, the amount of leaf needed 50~100 g/L, extraction temperature 9$0^{\circ}C$ and extraction time 2 hr. The yield of extraction was 20~25%. The anti-hyperglycemic effect of mulberry leaves was at maximum when the concentrations of mulberry leaf extract and silk peptide were 1% and 0.1%, respectively.