• The Journal of the Acoustical Society of Korea
• /
• v.33 no.5
• /
• pp.291-299
• /
• 2014

To probe the temperature elevation effect caused by ultrasound, a tissue mimicking phantom was newly suggested. A carrageenan gel was adopted to realize not only the required transparency for visualization but also acoustic characteristics similar to human tissue. To visualize the temperature elevation inside phantom, thermochromic film with a critical temperature of discoloration was introduced. Acoustic characteristics of the tissue mimicking phantom were examined when the concentrations of carrageenan and sucrose changed. As the results, the attenuation coefficient of the phantom could be controlled in the range of 0.44~0.49 dB/cm/MHz, and the acoustic impedance in the range of 1.52~1.77 Mrayls. We could control the acoustic characteristics of the phantom by different concentration of carrageenan and sucrose, and it was possible to examine the temperature elevation caused by ultrasound in the phantom. The suggested method was verified by noninvasively visualizing the temperature elevation due to planar and focused ultrasound using the fabricated phantom.

• Korean journal of food and cookery science
• /
• v.10 no.2
• /
• pp.121-125
• /
• 1994

The antioxidant activity of gingerol according to temperature on soybean oil were examined by measuring peroxide value(POV). The induction period(IP) of soybean oil was 45; 276.0, 65; 17.0 and 105$^{\circ}C$ : 4.7 hours respectively by-measuring POV. The relative antioxidant effectiveness(RAE) of ginge-rol group were 45; 191, 65; 200, 65: 150, 85: 132 and 105$^{\circ}C$;106%. 'The activation energies(Ea) and temperature coefficients(Q10) for Arrhenius equations at 45∼105$^{\circ}C$, was estimated in order to find out the influence of temperature on the oxidation of soybean oil contai-ning various antioxidants. The soybean oil was more unstable at 45∼65$^{\circ}C$ than at 65∼105$^{\circ}C$ in the Ea and Q10. The soybean oils containing gingerol were more stable than the control group at 45∼105$^{\circ}C$, however, BHT group was unstable compared to gingerol group at 85∼105$^{\circ}C$.

• Science of Emotion and Sensibility
• /
• v.9 no.4
• /
• pp.341-351
• /
• 2006

The effect of color evokes a certain feeling and affects behavior. Especially, an understanding and applying color are critical because well-designed color substantially contributes to quality and usability. In this study, the effects of three color components(hue, value, and chroma) on apparent warmth were investigated separately and relatively, and then feasibility of applying to the information display was examined. The result showed that the apparent warmth of 10 Hues was a U-shaped function declining from Red to Purple-Blue and increasing from Purple-Blue to Red-Purple with following order of color-circle. Chroma made the character of hues remarkably clear, so warm color becomes warmer and cool color becomes cooler if chroma gets higher. But value has no effect on warmth. These results propose that we can change the apparent warmth by varying chroma in the limitation of color use. And there was a sharp distinction between warm and cool color, Meanwhile, in the reading task of the graphical information, the subjects' judgment distortion overestimating or underestimating the actual degrees was ascertained. This result should be applied to control operator's sensitivity in accordance with the purpose of task and display.

• Journal of Korean Society of Forest Science
• /
• v.4 no.1
• /
• pp.42-45
• /
• 1965

• The Bulletin of The Korean Astronomical Society
• /
• v.16
• /
• pp.20.2-21
• /
• 1991

• The Bulletin of The Korean Astronomical Society
• /
• v.16
• /
• pp.8.2-8.2
• /
• 1991

• Journal of Energy Engineering
• /
• v.7 no.2
• /
• pp.163-171
• /
• 1998

Degradation of polymer additives is enhanced at higher temperature of the test solutions. The degradation of Co-polymer solution was investigated experimentally in a closed loop at the temperature of 6$0^{\circ}C$ and 8$0^{\circ}C$ with various polymer concentrations of 100, 200, 400, 600 ppm in order to see the effect of temperature and polymer concentration with time. The degradation effect were found to be more dependent on temperature than mechanical shear. The friction factor versus Reynolds number curves show that in the range of Reynolds number number 50,000~150,000 the friction was decreased as Reynolds number increased and the friction of solution at low temperature approached to Virk's maximum drag reduction asymptote. For constant flowrates and temperatures the degradation effect was found to be less likely in higher polymer concentration. For constant flowrates and polymer concentrations the degradation rates are affected mainly by temperature. At the temperature of 8$0^{\circ}C$ and polymer concentration of 100 ppm, drag reduction effect was disappeared after 4 hours. However, this thermal degradation could be avoided with additional materials such as surfactants which are supposed to enhance the bonding forces between polymer molecules.

• Korean Journal of Optics and Photonics
• /
• v.21 no.4
• /
• pp.133-138
• /
• 2010

All radiation thermometers have a size-of-source effect (SSE) and a self-radiation effect (SRE). The SSE,defined as dependence of the detector signal of a radiation thermometer on the diameter of a source, is critically dependent on the wavelength since diffraction is the main cause. In this paper, we have measured the SSE and the SRE of TRT2 (Transfer Radiation Thermometer 2, HEITRONICS) widely used as a transfer standard in low and middle temperature range. At $300^{\circ}C$, The radiation temperature difference between the 60 mm diameter blackbody and 10 mm diameter blackbody due to the SSE was estimated to be $3.5^{\circ}C$ in low temperature mode ($8-14\;{\mu}m$) and $0.5^{\circ}C$ in middle temperature mode ($3.9\;{\mu}m$). In addition, the measured radiation temperature difference of the blackbody due to the SRE was found to be 110 mK when the body temperature change of TRT2 was set at $2.6^{\circ}C$.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2012.05a
• /
• pp.106.2-106.2
• /
• 2012

Ti-Ni합금은 CsCl구조의 B2상, monoclinic 구조의 B19'(M)상과 rhombohedral 구조의 R상(R)이 나타난다고 알려져 있고, 이들 상의 변태에 의해 열탄성 마르텐사이트와 응력유기 마르텐사이트에 의한 형상기억효과와 초탄성 효과를 가지고 있다. 또한 Ti-Ni 합금은 우수한 형상기억특성을 가질 뿐만 아니라 생체적합성, 가공성 및 내식성 등이 뛰어나 공업분야 및 생체분야에서 폭 넓게 활용되고 있다. Ti-Ni합금의 형상기억특성은 냉간가공 후 어닐링 처리의 온도와 시간에 따른 matrix 내 Ni의 농도, 석출물의 밀도와 크기, 전위밀도와 전위주위의 응력장에 의해 영향을 받는다고 알려져 있다. 본 연구에서는 Ti-Ni합금의 형상기억 특성 및 변태온도에 미치는 영향을 조사하기 위해 다양한 냉간가공률의 시료를 제작하여 다양한 온도에서 Annealing 처리를 하여 냉간가공률 및 Annealing 온도가 형상기억특성에 미치는 영향을 조사하였다. Ti-50.4 at.% Ni 합금은 진공 아크 용해로에서 용해 하였으며, 용해된 Ingot는 열간단조 및 열간 압출한 후 냉간 인발과 중간온도에서 어닐링을 반복하면서 직경 0.5mm의 선재로 만들었다. 최종적으로 제작한 선재의 냉간가공률은 9.5%, 18.2%, 34.5%, 45% 이었다. 각 시편은 5X10-5torr의 진공으로 석영관에 진공 봉입하여 각각 673K, 723K, 783K에서 1hr 열처리 하였다. 합금의 형상기억특성과 변태온도는 DSC에 의해 조사되었다. DSC 측정 결과, 냉간가공률이 증가함에 따라 마르텐사이트 변태 온도는 감소하였고, 어닐링 온도가 증가함에 따라 마르텐사이트 변태 온도는 증가하였다. 또한 가공률이 증가하여도 R상 변태온도는 큰 변화가 없었고, Annealing온도가 증가함에 따라 R상 변태온도는 감소하였다. 또한, 형상기억특성은 인장시험기를 이용한 정하중 열싸이클 테스트를 이용하여 평가 하였다. 냉간 가공률이 증가함에 따라 안정한 형상기억특성을 나타내었다.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.02a
• /
• pp.405-405
• /
• 2012

InSb는 높은 전자이동도와 낮은 밴드갭을 가지고 있어 저전력 고효율의 고주파소자 및 비선형 광소자에 적합한 물질이다. 특히 InSb 기반 소자들은 전자-포논효과의 영향을 덜 받는 저온에서 고감도 소자로도 사용되고 있는데, 소자의 최적합 설계와 제작시의 실시간 성장제어를 위해서는 넓은 온도범위에서의 InSb의 광물성이 필요하다. 분광타원편광분석법(ellipsometry)은 물질의 광특성인 유전율 함수를 정확하게 측정 할 수 있은 기술로써, InSb 에 대한 유전율 함수는 많은 연구를 통해 잘 알려져 있다. 그러나, 온도변화에 대한 연구로는 100-700 K, 1.2-5.6 eV의 제한된 온도와 분광영역에서만 이루어졌다. 본 연구에서는 보다 확장된 온도범위(25-686 K), 광역 에너지 범위 (0.74-6.5 eV)에서 분광타원편광분석 연구를 수행하였다. 그 결과 저온에서의 전자-포논 효과의 감소로 인한 청색천이와 보다 명확한 전자전이점들의 값을 얻었다. 특히, 100 K 까지의 이전 연구에서는 구분할 수 없었던 $E_2'$ 전이점을 본 연구의 25 K 의 유전율 함수에서 명확히 구분할 수 있었고, 고에너지 영역의 $E_1'+{\Delta}_1+{\Delta}_1'$ 전이점의 온도의존성을 처음으로 연구하였다. 본 연구의 결과는 InSb 를 기반으로 한 광전자 소자의 개발 및 적용분야와 밴드갭 엔지니어링 분야에 많은 도움이 될 것으로 예상한다.