• Tribology and Lubricants
• /
• v.3 no.2
• /
• pp.50-55
• /
• 1987

윤활제가 없는 경우와 고체 윤활제를 사용하였을 경우 세라믹 SiC의 마찰 마모시험을 상온 및 고온에서 실시하였다. 이때 사용한 마모시험기는 Two-disk형이고, 마찰속도는 132mm/sec이며, 하중의 2.6N에서 10.4N의 범위이다. 실험결과에 의하면 고체윤활제(흑연. Mos$_2$)는 세라믹의 마찰마모를 300$\circ$C 이하에서 모두 효과적으로 감소시킬 수 있었다. 또 300$\circ$C 이하에서는 Mox$_2$가 더 효과적인 윤활제 역할을 하고 300$\circ$C 이상에서는 흑연이 더 효과적이었다. 그원인은 윤활제 피막형성 및 파괴가 윤활 효과에 지배적인 영향을 미치고 온도상승에 따라 각 윤활제의 특성이 달라지기 때문이었음이 SEM 이나 EDS에 의해 밝혀졌다. 따라서 고온에서 윤활효과를 증대시키기 위해서는 윤활피막의 접착을 강하게 해줄 수 있는 접착 첨가물이 필요하다. 고온에서 윤활이 안된 경우 마모는 결정경계를 통한 입자들의 파괴가 주로 원이되나 낮은 온도나 윤활상태에서는 결정경계에 무관한 연마 마모가 마모를 지배하고 있었다.

• Journal of the Korean Magnetics Society
• /
• v.26 no.5
• /
• pp.149-153
• /
• 2016

In Fe/Gd multilayers, patterning effect on the interlayer coupling was studied by comparing patterned and unpatterned samples that were cut from a multilayer film. A comparative study of the two samples via temperature dependent Gd-specific magnetization vector using X-ray magnetic circular dichroism (XMCD) shows that the temperature dependence of the Gd magnetization vector can be modified in the patterned sample due to a competition between the patterning and antiferromagnetic interlayer coupling effects.

• Proceedings of the Korea Institute of Fire Science and Engineering Conference
• /
• 2008.04a
• /
• pp.230-233
• /
• 2008

In this study, we conducted an FDS simulation for the purpose of carrying out a basic assessment of the usefulness of the water spray for fire extinguishing. We analyzed the effect of securing the stability in temperature and smoke density in case of fire according to fire intensities and changes in wind speed. When there was no wind speed in tunnels, it was effective in securing the safety of people because the cooling effect of the water spray system had an excellent effect on reducing temperatures and smoke densities there.

• The Korean Journal of Rheology
• /
• v.3 no.1
• /
• pp.76-85
• /
• 1991

적은양의 분자량이 큰선형 고부자를 수용액에 첨가함으로서 얻어지는 마찰저항가소 연구가 rotating disk 장치를 이용해 수행되었다. 마찰저항 감소제로 poly(ethylene oxide)와 poly(acrylamide)를 사용하였으며 고분자 분자량 고분자 농도, disk 의 회전속도 및 온도 등 여러 가지 인자에 대한 마찰정항감소의 의존성을 연구하였다. 또한 마찰저항 감소 효과와 고분자 용액의 점도평균 분자량을 동시에 측정함으로서 고분자 퇴화에 대한 연구도 수행하 였다. 마찰저항감소는 고분자 농도가 증가함에 따라 임계농도에 도달할때까지 증가하였고 낮은 농도에서는 분자량이 큰 고분자일수록 더욱 큰 마찰저항 감소효과를 나타내었다. 마찰 감소 진행 중의 높은 전단력에 기인하는 고분자의 분해는 고분자 농도가 낮은데에서 더욱두 드러지게 나타났으며 온도 효과의 연구로부터 poly(acrylamide)가 poly(ethylene oxide)보다 열적으로 안정함을 알수 있었다.

• Korean Journal of Agricultural Science
• /
• v.26 no.1
• /
• pp.50-57
• /
• 1999

The purpose of this study was to determine the thermal inactivation of L. monocytogenes KCTC3443 in liquid culture heated in the controlled microwave system and in the conventional heating method. Furthermore, we have carried out a comparative study on the thermal and nonthermal microwave effects on microorganisms, pasteurized using a controlled microwave energy specially designed apparatuses and a water bath. For the automatic temperature control during microwave heating, the real time data acquisition and computation system is designed with BASIC routine. The automatic temperature control system used in the experiments perform relatively stable control at the experiment temperature of 55, 65, $75^{\circ}C$ and $85^{\circ}C$ for 30 minutes. The effects of microwave heating on liquid cultures was compared with that of conventional heating. The results show that microwave radiation, while being slightly quicker than conventional heating, still reduces effectively the number of pathogenic bacteria during heating for a limit time in liquid cultures. While no particular differences between microwave heating and conventional heating was not observed in the thermal inactivation of L. monocytogenes at 55, 65, $75^{\circ}C$ and $85^{\circ}C$ for 30 min., respectively. Microwave heating is, therefore, substantially not effective in inactivating L. monocytogenes in liquid culture than conventional heating method.

• Journal of the Korea Concrete Institute
• /
• v.28 no.3
• /
• pp.309-316
• /
• 2016

In this study, performance of hardening accelerator types which promote setting and hardening of cement has been reviewed in order to develop early age strength of concrete with compressive strength of 21~27 MPa after examination of strength development of the concrete at early age according to curing temperature and unit cement(binder) content. As results, soluble mineral salt showed better hardening acceleration effect than organic salt in the scope of this study. Also, hydration reaction accelerating effect of $C_3S$ by Soluble mineral salt is effective on development of early age compressive strength and it was shown that the Pt's hydration reaction accelerating effect was the best. Construction duration reduction can be expected by securing compressive strength for prevention of early aged freezing damage in 25hour-curing time under curing temperature at $15^{\circ}C$. Also, it was shown that compressive strength of specimen cured at $5^{\circ}C$ was similar with plain specimen cured at $10^{\circ}C$. Therefore, it is expected that fuel costs and carbon dioxide can be reduced when the same construction duration is considered.

• The Korean Journal of Pesticide Science
• /
• v.9 no.3
• /
• pp.268-273
• /
• 2005

The cultivating agroproducts are damaged by the Meloidogyne spp. which are gradually increasing in farm land soil. No effective control method for Meloidogyne spp., however, is available. Pasteuria penetrans which is one of the microorganisms in soil is used for biological control of Meloidogyne spp. although the method of mass production is limited. This study was conducted to investigate attachment and mass production effect of P. penetrans to M. arenaria under different temperatures (10, 30, 50 and $70^{\circ}C$) and pH values (4, 7 and 10). Attachment rates under these temperature and pH were more than 96% and 80%, respectively. In mass production rates, the number of P. penetrans attached on M. arenaria under different temperatures and pH were highly increased in root of tomato but not significantly different. Therefore, we concluded that P. penetrans can survive and attach on M. arenaria under various conditions. This method for mass production of P. penetrans can be provided to develop environmentally-friendly nematicide.

• Journal of Bio-Environment Control
• /
• v.28 no.3
• /
• pp.225-233
• /
• 2019

In the summer season, natural ventilation is commonly used to reduce the inside air temperature of greenhouse when it rises above the optimal level. The greenhouse shape, vent design, and position play a critical role in the effectiveness of natural ventilation. In this study, computational fluid dynamics (CFD) was employed to investigate the effect of different roof vent designs along with side vents on the buoyancy-driven natural ventilation. The boussinesq hypothesis was used to simulate the buoyancy effect to the whole computational domain. RNG K-epsilon turbulence model was utilized, and a discrete originates (DO) radiation model was used with solar ray tracing to simulate the effect of solar radiation. The CFD model was validated using the experimentally obtained greenhouse internal temperature, and the experimental and computed results agreed well. Furthermore, this model was adopted to compare the internal greenhouse air temperature and ventilation rate for seven different roof vent designs. The results revealed that the inside-to-outside air temperature differences of the greenhouse varied from 3.2 to $9.6^{\circ}C$ depending on the different studied roof vent types. Moreover, the ventilation rate was within the range from 0.33 to $0.49min^{-1}$. Our findings show that the conical type roof ventilation has minimum inside-to-outside air temperature difference of $3.2^{\circ}C$ and a maximum ventilation rate of $0.49min^{-1}$.

• Korean Journal of Remote Sensing
• /
• v.29 no.1
• /
• pp.95-104
• /
• 2013

In this study, a novel method is proposed for retrieving relative surface temperature from single-channel middle infra-red (MIR, 3-5 ${\mu}m$) remotely sensed data. In order to retrieve absolute temperature from MIR data, it is necessary to accommodate at least atmospheric effects, surface emissivity and reflected solar radiance. Instead of retrieving kinematic temperature of each target, we propose an alternative to retrieve the relative temperature between two targets. The core idea is to minimize atmospheric effects by assuming that the differential at-sensor radiance between two targets experiences the same atmospheric effects. To reduce effective simplify atmospheric parameters, each atmospheric parameter was examined by MODTRAN and MIR emissivity derived from ASTER spectral libraries. Simulation results provided a required accuracy of 2 K for materials with a temperature of 300 K within 0.1 emissivity errors. The algorithm was tested using MODIS band 23 MIR day time images for validation. The accuracy of retrieved relative temperature was $0.485{\pm}1.552$ K. The results demonstrated that the proposed algorithm was able to produce relative temperature with a required accuracy from only single-channel radiance data. However, this method has limitations when applied to materials having very low temperatures using day time MIR images.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.9 no.1
• /
• pp.90-98
• /
• 2001

The slow degradation rate of sewage sludge in anaerobic digesters is due to the rate limiting step of sludge hydrolysis. Therefore, the pre-treatment process had been carried out using acidic(pH 1.5, 3, 4, 5) and alkaline(pH9, 10, 13), thermal(50, 100, 150, $200^{\circ}C$) and ultrasonic treatment(400W, 20kHz, 15, 20, 25, 30, 35, 40, 50, 60min). In the best conditions of each treatment, the SCOD ratio(%) of treated/untreared samples were increased 102% in acid(pH5), 986% in alkali(pH13), 959% in thermal($200^{\circ}C$) and 1123% in ultrasonic(35min) treatment. As the result, the ultrasonic treatment was most effective, followed by alkali, thermal, acidic treatment. In the effects of total gas productivity, the thermal($200^{\circ}C$) pretreatment was the highest, followed by thermal($150^{\circ}C$), ultrasonic(90min), alkaline(pH9) and ultrasonic(50min).