• Korean Journal of Environmental Agriculture
• /
• v.38 no.2
• /
• pp.83-88
• /
• 2019

BACKGROUND: In recent years, studies on microplastics have focused on their decomposition in the ocean. However, no studies have been reported on the interaction between microplastics and metal ions in aqueous solutions. Therefore, this study was conducted to evaluate the adsorption capacity of cadmium(Cd) by polypropylene (PP) in aqueous solution. METHODS AND RESULTS: Cadmium adsorption characteristics of PP in aqueous solution were evaluated through various conditions including initial Cd concentration(1.25-25 mg/L), contact time(0.5-24 h), initial pH(2-6) and temperature($20-50^{\circ}C$). Cadmium adsorption fit on PP was well described by Freundlich isotherm model with adsorption capacity(K) of 0.028. The adsorption amount of Cd by PP increased with increasing contact time, indicating that adsorption of PP by Cd was dominantly influenced by contact time. Especially, the removal efficiency of Cd by PP was highest at high temperature. However, the surface functional groups of PP before and after adsorption of Cd were similar, suggesting that adsorption of Cd by PP is not related to surface functional groups. CONCLUSION: Our study suggests that PP affects the behavior of Cd in aqueous solution. However, in order to clarify the specific relationship between microplastics and metal ions, mechanism research should be carried out.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.15 no.1
• /
• pp.134-142
• /
• 2007

In this study the physico-chemical characteristics of solid waste and the thermagravimetric analysis of waste investigated. It was found that the combustible component, water and ash were 61%, 32%, 7% respectively. The amount of combustible component was much higher than those of others. It was shown that the total carbon and hydrogen of the waste 94% and the high heating value was 2897,883(Kcal/kg). The thermagravimetric analysis showed that the weight loss of wastes occurred as temperature increased, and the rate was higher in the temperature range of $300^{\circ}C$ to $500^{\circ}C$.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2006.05a
• /
• pp.441-446
• /
• 2006

유역에서 발생한 고탁수가 저수지내에서 장기화하는 현상에 관한 대책은 장기간이 소요되는 유역관리 대책과 탁수저감일수를 최소화하는 선택취수 개념의 우선 방류기법 등이 있다. 하류하천으로의 탁수 우선배제를 실시하기 위해서는 댐 방류탁수가 하류에 미치는 영향을 정확히 예측할 수 있는 하천탁도 예측 및 관리시스템 구축이 필요하다. 최근 고탁수현상을 경험한 낙동강 수계에서는 본류의 탁도 관리를 위해 임하댐 및 안동댐의 연직 탁도 분포 변화에 따라 댐 방류탁수에 의한 영향을 최소 또는 기준치 이하로 할 수 있는 댐 연계운영에 관한 조건 도출이 필요하다. 선택취수에 관한 수치모의 결과를 이용하여 저수지내 온도 및 탁도 분포 변화와 취수탑의 수문운영에 따른 방류수의 온도 및 탁도를 예측할 수 있다. 본 연구에서는 이와 같은 결과를 이용하여 안동댐과 임하댐의 방류조건에 대한 하류하천 합류부에서의 2차원 이송 확산 수치모의를 수행하고자 하였다. 이와 같은 연구를 성공적으로 수행하기 위해서는 지속적인 현장조사를 통한 지점별 탁도-SS 상관관계 도출, 비정상 흐름 및 수질모의 검 보정, 탁도예측 결과 검증이 필요하다. 평면 2차원 흐름 및 수질 모의 결과에 의하면, 임하댐 방류 탁도로 인한 반변천의 고탁수는 안동댐 방류 수에 지배를 받는 낙동강 본류와 합류되는 지점에서부터 약 5 km 떨어진 지점에서 횡방향 완전혼합이 이루어지는 것으로 나타났다. 이와 같은 모의결과는 완전혼합을 가정하는 1차원 수질모델링의 초기 입력자료에 사용됨으로써 1차원 탁도 모의결과의 정확성을 높이는 데 사용될 수 있다. 이를 이용하여 낙동강 수계 댐 연계운영에 따른 낙동강 탁도 예측모의를 수행하고, 이 결과를 이용하여 낙동강 탁도 예경보 시스템을 구축해야 할 것이다. 또한 선택취수 등을 통해 저수지 관리를 효과적으로 수행하기 위해서는 저수지 내부의 탁도 거동을 정확히 예측할 수 있어야 한다. 따라서 추후 동수역학 및 열역학에 기초한 3차원 수치모형 연구와 성층흐름에 정밀한 밀도류 실험연구 및 이에 대한 적용이 필요할 것으로 판단된다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2021.06a
• /
• pp.180-180
• /
• 2021

가로수는 「도로법」 제11조에 따른 도로(고속국도를 제외한다)와 보행자전용도로 및 자전거전용도로 등 대통령령으로 정하는 도로의 도로구역 안 또는 그 주변지역에 심는 수목을 말하며, 도시의 가로수는 기후조절효과 및 대기오염 정화효과 등을 가질 뿐 아니라 도심지 내에 녹색을 도입하고 도시경관을 구성하는 주요 요소이다. 전국 각 시도에서는 가로수 조성사업을 지속적으로 추진하고 있다. 하지만 몇몇 도시에서는 적절하지 않은 가로수 관리로 인해 가로수가 말라죽는 현상이 증가하고 있다. 이에 가로수 고사 현상을 감소시키기 위하여 토양수분과 토양온도를 측정하여 가로수 피해와 연관성을 조사할 필요성이 있다고 판단하였다. 본 연구는 춘천시에서 진행하였으며, 일반 가로수와 현재 가로수 고사로 문제가 되고 있는 3 모니터링 지점을 선정하고, 토양수분 센서를 5, 15, 40 cm 깊이에 설치하였다. 센서를 이용하여 토양수분과 지온, EC 모니터링을 실시하였다. 토양수분 모니터링 자료를 활용하여 토층별 토양수분 소비량 산정을 하고, 현장 토양시료를 채취하여 물리·화학적 특성을 분석하였다. 또한 가로수 증발산량 산정 및 토층별 토양수분 소비량과 소비패턴을 비교하였다. 본 연구 결과를 향후 RZWQM(Root Zone Water Quality Model) 모델의 기초자료 및 시나리오 구성에 활용될 수 있으며, 모니터링 및 모델링 결과를 활용하여 가로수 및 도시 표토 기능 위협 요인을 분석에 활용 될 수 있다.

• International Journal of Highway Engineering
• /
• v.11 no.2
• /
• pp.67-74
• /
• 2009

The strength of concrete is one of the most important parameters in evaluating the properties of concrete. Compressive strength of concrete has been widely used because of its convenience of experiments and generality. Compressive strength of concrete varies according to materials and curing conditions. Even with the same materials, the strength varies according to the curing conditions. Therefore, if we want to know the strength of concrete from the construction field, we have to put it in exactly the same curing condition with the construction field. But it is impossible to make the exactly same curing conditions in the laboratory. Also damages occur in order to measure the strength of concrete, because the core hat to be made into the pavement. To overcome these limits, many studies of nondestructive method have already been researched. It was already proven that shear wave velocity was very closely related to the compressive strength. In this study, three different curing temperatures with the same mixture paste were used, and compressive strength and shear wave velocity, according to the aging were measured. The relationship between these two parameters was examined. As results, curing temperature affected the compressive strength and the shear wave velocity, but did not affect the relation between them.

• Economic and Environmental Geology
• /
• v.26 no.3
• /
• pp.259-265
• /
• 1993

The variation of H/F coefficient (Hubnerite/Feberite coefficient) and the temperature of formation with depth have been studied for the hydrothermal tungsten-quartz veins from Ssangjeon, Weolag, Cheongyang, and Sannae mines. All samples were selected at the same paragenetic stage and mineral assemblege according to depth. The studied mines provide an opportunity to examine and regional variations in wolframite composition in different provinces. The formation temperature is linearly related to the depth. At the Weolag, Cheongyang and Sannae mines, the H/F ratio of wolframite and filling temperatures of fluid inclusions in quartz show a general tendency to decrease at shallow levels, in spite of different geological settings. This implies the pH of fluid will decrease vertically with falling temperature and the high H/F ratio of wolframite in deep zone result in an increase of pH with depth. The Ssangjeon mine exhibits a tendency to increase slightly upwards at shallow level. This implies a different geochemical environment (high pH environment) for the Ssangjeon mine, as compared to the other three mines. The H/F coefficient pattern suggests that it is a useful geothermometer for vein-type tungsten deposits in Korea. The H/F coefficient as an indication of depth should be examined for use in exploration.

• The Bulletin of The Korean Astronomical Society
• /
• v.40 no.2
• /
• pp.53.4-54
• /
• 2015

분자운의 광대역 분포는 작은 영역에서는 볼 수 없는 독특한 모습을 보여준다. 본 연구는 2010년도 TRAO 관측으로 얻는 외은하면의 $4.3^{\circ}{\times}2^{\circ}$의 광대역 데이터를 사용해서 광대역 분자운 분포의 특성을 분석했다. 광대역 분자운들은 형태학적 특징에 의거해서 네 종류로 분류되었다: chain, twisted filament, speckle, cluster suspect 이들의 특징을 간략히 소개하고 광대역 분자운들을 보는 새 관점으로 분자운 충돌 이론을 소개한다. 그와 함께 광대역 연구의 대표적인 예로 두 전파원을 소개한다. 첫째는 CTB109 (3C 434.1) 근처 분자운이며, 길다란 CO filament가 포함된다. 둘째는 "집게벌레(S157 ab 포함)"로서 강한 별 탄생을 보여주는 특이한 영역으로서 강한 CO emission이 두 개 twisted filament 구조를 보여준다. 연구에는 DRAO HI, IRAS 적외선 자료, DRAO Radio continuum data를 사용했고, CO 자료를 통해서 분자운의 질량과 밀도, 온도 등의 기본 물리량을 계산했다.

• The Korean Journal of Pesticide Science
• /
• v.9 no.3
• /
• pp.262-267
• /
• 2005

In order to commercialize Paenibacillus sp. AC-1 and to minimize its harmful side effects, four granular formulations were prepared using AC-1 powder, adjuvant, and carrier and then their physicochemical properties of the formulations were investigated. Out of the carriers tested, the best one was talc for the formulation. Viable cells was stabilized during the formulating process. Viable cells in the granules formulated with Paenibacillus sp. AC-1 powder were stabilized at storage temperature range ($4{\sim}50^{\circ}C$) after 12 weeks. The release rate of viable cells from granules into water under a static condition were eluted over 90% in 7 hours and breakdown rates of particle were 100% in 1 day. Among the tested formulations, granular formulation comprising of 20% of Paenibacillus sp. AC-1 powder, 7% of polycarboxylate as surface active agent, 1% of sodium polyacrylate as adjuvant, the rest as carrier showed to be best.

• Journal of Korean Ophthalmic Optics Society
• /
• v.19 no.1
• /
• pp.1-8
• /
• 2014

Purpose: To observe changes of coatings and lens materials with varying temperature to understand effect of temperature on plastic lens. Methods: In this study, three lenses of different refractive indices (2 of thiourethane oriented lenses, an allyl diglycol carbonate oriented lens) were exposed to high temperature (50, 80, and 100 degree) for 5 hours and changes of individual coating (anti-refractive coating, hard coating, and water repellent coating) were measured. Results: As a result, high-refractive index lenses did not exhibit significant variation of hardness. However, hardness of mid-refractive index lens were decreased when exposed to high temperature and destructions of hard coating layer was inferred. Surface contact angles of lens were decreased with increasing temperature and water repellent coating layer were damaged at higher than 80 degree. Conclusions: Multi including water repellent coatings on all three lenses with different refractive indices were damaged when exposed to at or higher than 80 degree. The degree of changes in mechanical and physical properties were depended on polymer material type.

• Resources Recycling
• /
• v.29 no.6
• /
• pp.57-64
• /
• 2020

In this study, removal of OCA and organic impurities for recycling LCD touch panel glass was conducted by mechanical and chemical dissolution methode. Cut mill and oscillation mill were used for mechanical crushing of touch panel, and water, ethanol, dichloromethane were used to remove OCA and organic impurities. As a result of TGA, when applied only dicloromethane in the process, the efficiency of organic removal was to be best. In addition, removal effect of organic impurities increased as the cleaning temperature increased. As a result of zeta potential analysis to confirm the dispersion degree of touch panel glass in the solvent, the absolute value of the zeta potenial of water with the lowest cleaning effect was lower than other solvents, and it was confirmed that efficiency of organic removal is affected not only by the chemical dissolution properties but also the physical dispersion properties in the solvent.