• Journal of Advanced Marine Engineering and Technology
• /
• v.36 no.8
• /
• pp.1016-1023
• /
• 2012

Because heat exchanger consists of many circular tubes, the analysis of local heat transfer and pressure drop at the surrounding of circular tubes, performance and calculation of size, economics play important roles in design. In this study, This study conducted experiment and analysis in order to observe convective heat transfer coefficient LMTD (logarithm mean temperature difference) and pressure losses according to water temperature and air flow rate using a cross flow heat exchanger of staggered arrangement. This heat exchanger was composed of staggered arrangement for five rows and seven columns of tube banks, and the condition of experiment and analysis are $40{\sim}65^{\circ}C$ of water temperature and $5.0{\sim}12.3m^3/s$ of air flow rate. As a result of it, since air density decreases as water temperature and flow rate increases, Reynolds number decreases with characteristics of low flow velocity but mean heat transfer coefficient increases with air flow rate increase, heat transfer performance has been improved and pressure losses decreased. And since heat transfer rate shows about 8~12% and pressure drop around 0.01~7.5% error as the analysis result, the feasibility of this study could be evaluated.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.12
• /
• pp.723-729
• /
• 2016

This study compared fin-tube and parallel-flow heat pipes for their sensible heat exchange rate, heat recovery amount, and air-side pressure drop. Tests were done with different refrigerant charging rates of 40-60% vol. and air flow rates of 300-1,400. The sensible heat exchange rate was highest for both types of heat pipes at a working fluid charge of 40% vol. and low flow rate. For the parallel-flow heat pipe, the 60% vol. charge is too high and results in a low sensible heat exchange rate. The reason is that the thicker liquid film of the tube wall deteriorates the heat transfer effect. Hence, the optimal charging rate is 40 to 50% vol. The evaporator heat pipe has a larger air-side pressure drop than the condenser section heat pipe. The reason is considered to be condensation water arising from the evaporator surface. Compared to the fin-tube heat pipe, the parallel-flow heat pipe showed better performance with a working fluid charging rate of 48%, volume of 41%, and an air-side pressure drop about 37%.

• Proceedings of the Korean Society for Applied Microbiology Conference
• /
• 1986.12a
• /
• pp.531.1-531
• /
• 1986

L. acidophilus를 대두유에 젖산발효 시킬 때 단독배양과 효모인 K. fragilis와의 혼합배양에 대하여 검토하였다. 젖산의 생성량은 젖산균 단독배양보다는 효모와 혼합배양 하는 것이 2.6배나 많았으며 L. acidophilus를 단독배양 하였을 경우 균의 생육속도와 PH 강하속도는 K. fragilis를 단독배양한 것에 비교하여 늦었다. 그러나 혼합배양 함으로써 생육속도와 PH 강하속도는 K, fragilis를 단독배양한 것보다 빨랐다. 단독 또는 혼합젖산발효에 미치는 온도의 영향을 조사한 결과는 L. acidophilus.는 37$^{\circ}C$, K. frahilis는 3$0^{\circ}C$, 두 균의 혼합배양시는 35-37$^{\circ}C$ 범위에서 산생성이 가장 좋았다. 혼합배양 시 검토한 젖산발효 최적조건은 L. acidophilus와 K. fragilis의 접종비율이 1:5, sucrose 0.5-1.0% SKIMMILK 1.5%를 각각 첨 가한 것이 좋았다.

• Journal of Advanced Marine Engineering and Technology
• /
• v.27 no.7
• /
• pp.872-878
• /
• 2003

As the results of recent industrial development, many industrial plants and marine structures are exposed to severe corrosion environment than before. Especially, under the wet environment, crevice corrosion damage problems necessarily occur and encourage many interests to prevent them. In this study, the electrochemical polarization test was carried out to study characteristics of crevice corrosion for AISI 304 stainless steel in various solution temperatures. The results are as follows ; 1) as the solution temperature increased in IN $\textrm{H}_2\textrm{SO}_4$, the passive current density and critical current density were increased, whereas corrosion potential and break down potential were nearly constant, 2) as the solution temperature increased. the induced time for initiation of crevice corrosion was shortened. 3) The potential range in the crevice was -220mV/SCE to -380mV/SCE according to the distance from the crevice opening, which is lower than that of external surface of -200mV/SCE.

• Korean Journal of Materials Research
• /
• v.5 no.3
• /
• pp.261-267
• /
• 1995

IN 617의 시편으로 1073K의 온도와 107과 180 MPA의 응력에서 $\varepsilon$=0.18까지 정압크\ulcorner을 한 직후 107 MPa로 응력을 낮추고 (응력강하시험), 또 다른 시편에는 180 ↔ 0.2 MPa의 응력으로 각각 17초씩 반복주기변형을 수행하여 정압크\ulcorner 변형시의 크\ulcorner곡선과 비교를 하엿다. 그 결과 IN 617 의 반복주기변형에서는 변형속도둔화(CCD)가 발생함을 알 수 있었고, 응력강하와 반복변형시험은 모두 거의 같은 모양의 회복 크\ulcorner곡선을 나타내었다. 이러한 회복 크\ulcorner은 아결정립크기와 자유전위밀도로서 그 회복기구를 설명할수 있었다.

• Journal of Energy Engineering
• /
• v.9 no.3
• /
• pp.202-211
• /
• 2000

본 연구는 다양한 각도를 가지는 와이어코일을 사용하여 관내 단상 열전달 촉진 및 압력강하 특성 실험을 수행하였다. 작동유체는 순수 물과 에틸렌글리콜을 체적비율로 50% 혼합하여 사용하였으며, 시험부 관지름은 11mm와 13.88mm이고, 시험부 길이는 760mm를 사용하였다. 평활관과 와이어코일을 삽입한 열전달촉진관에 대한 관내 열전달계수와 마찰계수는 실험에서 측정한 온도, 유량, 압력강하 값을 기초로 구하였다. 와이어코일에 대한 거친표면해석을 수행하였으며, 그 결과를 거칠기 래이놀즈수에 대한 운동량전송 거칠기함수와 열전달 거칠기함수로 표현하였으며 이에 대한 상관식을 제시하였다. 이 상관식들은 거칠기 레이놀즈수, 코일 각도, 프란틀수의 함수로 표현하였다.

• Applied Chemistry for Engineering
• /
• v.8 no.6
• /
• pp.985-993
• /
• 1997

The effects of CaO and MgO fluxes on the fusibility of fly-ashes were investigated for two different fly-ashes. A fusion temperature of mixtures of selected fly-ashes and fluxes were measured by the ASTM test method(D1857) and the differential thermal analysis. IDT of these samples added CaO and MgO as a fluxing agent dropped in the range of 114 to $294^{\circ}C$ and 80 to $224^{\circ}C$, respectively. Compared with ash fusion temperature to Base/Acid ratio, the lowest ash fusion temperature were measured in the range of 0.7 to 0.8 for CaO-fly ash mixtures and 0.3 to 0.4 for MgO-fly ash mixtures. As a result, MgO in small addition acted as a more effective flux than CaO. A conventional Base/Acid ratio and liquidus point of ternary diagram did not show a good correlation with ash fusion temperature for these samples. In pure fusion temperature of fly ash-mixtures, DTA was better method than ASTM test method.

• Clean Technology
• /
• v.20 no.3
• /
• pp.263-268
• /
• 2014

Using the CFD method, the pressure drop in 6 cyclone dust collectors of different shape were calculated. And the results were compared with results of the conventional theories. Equations of Shepherd and Lapple (1939, 1940), First (1950), Alexander (1949), Stairmand (1949), Barth (1956) were used in the theoretical calculation. In CFD calculations, we used standard k-epsilon model for analysis of turbulent flow, fluid is $25^{\circ}C$ air, the velocity at inlet is 10 m/s and the temperature is $25^{\circ}C$. In CFD analysis results, the pressure distributions along the flow showed similar patterns in different cyclone shapes. But the pressure drop distributions estimated on the conventional theories had big difference in different cyclone shapes. Only First's theory and CFD analysis showed similar results.

• Journal of the East Asian Society of Dietary Life
• /
• v.12 no.5
• /
• pp.364-369
• /
• 2002

Mulberry leaves are believed to be a potent inhibitor of intestinal $\alpha$-glycosidase and the digestion of sucrose in the small intestine. Mulberry leaves are also blown to help prevent the postprandial hyperglycemia. The objective of this study was to elucidate the functionality and anti-hyperglycemic effect of mulberry leaves, and to develop a functional drink using mulberry leaf, silk peptide and oriental medicine. Several mixtures of mulberry lear extract silk peptide and oriental medicine were made for the purpose of manufacture and formulation of products. These mixtures were tested to check the $\alpha$-glycosidase inhibition effect to find the best formula. The optimum conditions for a mulberry leaf hot water extract were that the size of leaf was under 3mm, the amount of leaf needed 50~100 g/L, extraction temperature 9$0^{\circ}C$ and extraction time 2 hr. The yield of extraction was 20~25%. The anti-hyperglycemic effect of mulberry leaves was at maximum when the concentrations of mulberry leaf extract and silk peptide were 1% and 0.1%, respectively.

• 한국생물공학회:학술대회논문집
• /
• 2005.04a
• /
• pp.75-79
• /
• 2005

Temperature decrease upon Low-Frequency-Wave stimulation at PC4 and PC8 of the Pericardium Meridian of hand jueyin indicated that body heat dissipated along the Meridian. The temperature difference between PC4 and PC8 was smaller at 50Hz compared with that of 100Hz. No further increase in temperature difference was absorbed at 150Hz.