• Korean Chemical Engineering Research
• /
• v.55 no.3
• /
• pp.385-394
• /
• 2017

In this study, reaction mechanism and curing characteristics of adhesives formulated with NaOH- and $H_2SO_4$-hydrolyzed chicken feather (CF) and formaldehyde-based crosslinkers were investigated by FT-IR and DSC. In addition, adhesive properties and formaldehyde emission of medium-density fiberboards (MDF) applied with the adhesives were measured. CF-based adhesives having a solid content of 40% and over were very viscous at $25^{\circ}C$, but the viscosity reduced to $300{\sim}660m{\cdot}Pa{\cdot}s$ at $50^{\circ}C$. Consequently, the adhesives could be used as a sprayable resin. Through the FT-IR spectra of liquid and cured CF-based adhesives, addition reaction of methylol group and condensation reaction between the functional groups with the use of formaldehyde-based crosslinkers were identified. From the analysis of DSC, it was elucidated for CF-based adhesives to require a higher pressing temperature or longer pressing time comparing to commercial urea-formaldehyde (C-UF) resin. MDF bonded with CF-based adhesives, which was formulated with 5% NaOH-hydrolyzed CF (CF-AK-5%) and PF of formaldehyde to phenol mole ratio of 2.5 (PF-2.5), and pressed for 8 min had higher MOR and IB than those with other CF-based adhesives. MOR and IB of MDF bonded with the CF-based adhesives regardless of formulation type and pressing time were higher than those with C-UF resin. When the values compared with the minimum requirements of KS standard, IB exceeded the KS standard in all formulations and pressing time, but MOR of only MDF bonded with CF-AK-5% and PF-2.5 and pressed for 8 min satisfied the KS standard. What was worse, 24-TS of MDF bonded with all CF-based adhesives did not satisfied the KS standard. However, MOR and 24-TS can be improved by increasing the target density of MDF or the amount of wax emulsion, which is added to improve the water resistance of MDF. Importantly, the use of CF-based adhesives decreased greatly the formaldehyde emission. Based on the results, we reached the conclusion that CF-based adhesives formulated under proper conditions had a potential as a sprayable resin for the production of wood panels.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.30 no.1
• /
• pp.15-24
• /
• 2003

The purpose of this study is to investigate the sterilization effect of Er:YAG laser against the intraoral acid producing bacterium, S. mutans, by irradiating the culture solution containing S. mutans KCTC 3065 with Er:YAG laser having a $650{\mu}m$ diameter beam through the non-contact method. We obtained the following results after examining the temperature changes of the culture solution, numbers of bacterial colonies, and acid-producing ability and attaching ability on teeth by measuring the amount of extracellular polysaccharide produced by S. mutans. The number of bacterial colony was decreased in $10{\mu}l$ culture solution irradiated with laser in overall compared to the control solution. The number decreased as the irradiation intensity and pulse repetition rate were larger and as the exposure time was increased. However, it did not change significantly in $100{\mu}l$ culture solution compared to the control solution. Although the acid-producing ability of S. mutans was inhibited for a certain duration after laser irradiation in 10r1 bacterial culture solution, it did not change in $100{\mu}m$ solution compared with the control solution. The amount of extracellular polysaccharide synthesized by S. mutans was partially decreased through laser irradiation in $10{\mu}m$ culture solution but did not change in $100{\mu}m$ culture solution. Based on these findings, we concluded that Er:YAG laser has an sterilization effect on S. mutans in which we presume that the mechanism is through the heat effect rather than the mechanical effect from development of ultrasound.

• Journal of the Korean Electrochemical Society
• /
• v.4 no.2
• /
• pp.58-64
• /
• 2001

YSZ ($8mol\%$ yttria-stabilized zirconia)-modified LSM $(La_{0.85}Sr_{0.15}MnO_3)$ composite cathodes were fabricated by formation of YSZ film on triple phase boundary (TPB) of LSM/YSZ/gas. The YSZ coating film greatly enlarged electrochemical reaction sites from the increase of additional TPB. The composite cathode was formed on thin YSZ electrolyte (about 30 Um thickness) supported on an anode and then I-V characterization and AC impedance analyses were performed at temperature between $700^{\circ}C\;and\;800^{\circ}C$. As results of the impedance analysis on the cell at $800^{\circ}C$ with humidified hydrogen as the fuel and air as the oxidant, R1 around the frequency of 1000 Hz represents the anode Polarization. R2 around the frequency of 100Hz indicates the cathode polarization, and R3 below the frequency of 10 Hz is the resistance of gas phase diffusion through the anode. The cell with the composite cathode produced power density of $0.55\;W/cm^2\;and\;1W/cm^2$ at air and oxygen atmosphere, respectively. The I-V curve could be divided into two parts showing distinctive behavior. At low current density region (part I) the performance decreased steeply and at high current density region (part II) the performance decreased gradually. At the part I the performance decrease was especially resulted from the large cathode polarization, while at the part H the performance decrease related to the electrolyte polarization.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.42 no.10
• /
• pp.1638-1648
• /
• 2013

To promote the utilization of wild edible plants, this study examined blanching, drying, and fermentation as methods for enhancing the functionality of Hemerocallis coreana Nakai. Specimens fermented for 24 hours at a fermentation temperature of $50^{\circ}C$, with a relative humidity of 65%, contained the highest amount of organic acid (18,109.82 mg/100 g). For the blanched; specimens, total organic acid content decreased about 30% compared with the freeze-dried specimens. The main organic acid of Hemerocallis coreana Nakai was confirmed as succinic acid. After fermentation, free sugars decreased; in particular, specimens fermented at a relative humidity of 80% showed a 32~75% reduction in free sugar compared with the freeze-dried specimens. In terms of amino acid content, Hemerocallis coreana Nakai was mainly composed of valine, isoleucine, and phenylalanine. In fermented specimens the total amino acid content was highest in a moderately fermented (17 hr) specimen, (1,010.71 mg/100 g fresh wt.), but decreased in the maximally fermented (24 hr) specimen. The longer the fermentation, the higher the decrease in non-essential amino acids content, while the content of more essential amino acids consistently increased. In conclusion, since seasoned Hemerocallis coreana Nakai contains a considerable amount of glutamine and asparagine, it has a fresh sour and sweet taste; thus, it will likely be a highly preferred wild edible plant. Also, with an increase of essential amino acids after fermentation, Hemerocallis coreana Nakai is excellent in terms of nutrition. Thus, it may be possible to utilize fermented Hemerocallis coreana Nakai in the development of diverse products.

• Journal of Mushroom
• /
• v.13 no.3
• /
• pp.212-216
• /
• 2015

A new commercial strain "Mongdol" of oyster mushroom was developed by hyphal anastomosis. It was improved with hybridization between monokaryotic strain derived from Pleurotus ostreatus ASI 0627 and dikaryotic strain derived from P. ostreatus ASI 2929. The optimum temperature of mycelial growth and fruiting body development were $25{\sim}30^{\circ}C$ and $12{\sim}18^{\circ}C$, respectively. When two different media including PDA (potato dextrose agar medium) and MCM (mushroom complete medium) were compared, the mycelial growth of this mushroom was faster in MCM than in PDA. Similar result was observed with the control strain P. ostreatus ASI 2504. Analysis of the genetic characteristics of the new cultivar "Mongdol" showed a different DNA profile as that of the control strain ASI 2504, when RAPD (Random Amplified Polymorphic DNA) primer URP3 and URP6 were used. Fruiting body production per bottle was about 106 g using demonstration farms. The color of pileus was blackish gray and the stipe was long. Therefore, we expect that this new strain "Mongdol" will satisfy the consumer's demand for high quality mushrooms.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.10 no.1
• /
• pp.1-9
• /
• 1977

The purpose of this study is to complish a method of fish glue malting with residual products such as fish head and skin discarded from sea food processing. Using the skins of Alaska pollack and file fish from fillet packers, the optimum conditions of skin glue processing were investigated and physical and chemical properties of the product were also determined. The yields of Alaska pollack, Thelagra calcogramma, skin and file fish, Novodon modestus, skin to the total body weight were $4.6\%\;and\;5.0\%$ respectively. The optimum conditions for a $49.3\%$n yield Alaska pollack skin glue processing were considered the extraction of previously tinted in $0.1\%$ calcium hydroxide solution for 3 hours with the additional water as much as 3 times of sample weight at $70^{\circ}C$ for 3 hours under the controlled pH 5.0. The conditions for file fish skin glue were similar to those of Alaska pollack except the addition of five times of water to the weight of sample skin needed for extraction. The content of crude protein of Alaska pollack and file fish skin glue were $98.0\%\;and\;96.0\%$ respectively. The contents of crude ash and crude lipid were not different from that of chemical grade gelatin. Relative viscosity, melting point, gelation temperature and jelly strength of Alaska pollack skin glue marked 5.84, $21.8^{\circ}C,\;7.1^{\circ}C\;and\;10.0g$ respectively and those of file fish skin glue showed $5.79,\;25.0^{\circ}C,\;7.4^{\circ}C\;and\;11.6g$ respectively.The color and turbidity of Alaska pollack skin glue are slightly superior to those of file fish skin glue. It is supposed that the extract residue of skin glue is valuable for use the animal feeds by the results of amino acid composition. And the ratio of each amino acid content to the total amino acid of Alaska pollack and file fish skin glue is similar to that of chemical grade gelatin.

• Journal of Bio-Environment Control
• /
• v.16 no.4
• /
• pp.314-321
• /
• 2007

This study was conducted to select leaf vegetables suitable for cultivation in apartment verandas and simple and easy fertigation method for home gardening. In order to develop the convenient fertigation method, hydroponics, wick irrigation, and overhead irrigation methods were compared. For the wick irrigation, two types of nutrient sources were used; one was slow release fertilizers mixed with medium and the other one was nutrient solution filled in container located under pots. The growth of leafy lettuce, leaf mustard, and leaf beet was better in both of the wick irrigation methods rather than in overhead irrigation and hydroponics. The wick irrigation method is very easy, so that it is expected to bring a good result from the cultivating and managing point of view, if it brings with commercialized system along with slow release fertilizer. As a result of investigation of environment such as temperature, relative humidity, and irradiance level in apartment verandas in autumn the highest irradiance level during a day was just 48% and 35% in verandas facing south and feeing southeast, respectively, comparing to that in greenhouse. The light environment was investigated as a limiting factor for vegetable growing in verandas. Therefore, to select the vegetables showing good growth under low irradiance environment, nine leaf vegetables such as romaine lettuce, lent lettuce, head lettuce, endive, pak-choi, leaf mustard, garland chrysanthemum, leaf beet, and Chinese chive were grown under 0%, 50%, 70%, 90% shading. Among them, Chinese chive showed the best growth under low irradiance levels. Endive showed line growth reduction according to shading degree, however, even under 90% shading condition, it showed good growth. And then leafy lettuce, garland chrysanthemum, and pak-choi followed. Therefore, these results will be of help in selecting vegetables for veranda gardening with different light levels.

• Journal of Bio-Environment Control
• /
• v.19 no.4
• /
• pp.360-365
• /
• 2010

The effects of precooling treatments on the storability of chicon were investigated during modified atmosphere (MA) storage. The forced air cooling showed faster precooling rate that reduced the internal temperature of chicon to $2{\pm}1^{\circ}C$, and the precooling time of forced air cooling was 1/6 of room cooling. The half cooling time was 3 hr 21 min in room cooling and 1 hr 17 min in forced air cooling. Weight loss was less than 0.5% in all treatments both $5^{\circ}C$ and $10^{\circ}C$ MA storage and maintained higher in forced air cooling treatment. The concentration of carbon dioxide, oxygen, and ethylene of $50{\mu}m$ ceramic film packages were observed higher at $10^{\circ}C$ than $5^{\circ}C$. The precooling effect on respiration reduction was not shown at $5^{\circ}C$, but appeared that the gas concentration of precooling treatments showed less carbon dioxide and higher oxygen than non precooling treatment by 9 days after $10^{\circ}C$ storage. Ethylene concentration of precooling treatments showed lower than non precooling treatment until 3 days both $5^{\circ}C$ and $10^{\circ}C$ MA storage. Precooling showed the effect on maintaining visual quality of chicon both $5^{\circ}C$ and $10^{\circ}C$ MA storage. However, the forced air cooling that showed faster precooling rate did not appeared more precooling effect on the visual quality than room cooling because the fast air flow (6.0 m/sec) of forced air cooling hit directly on chicon outer leaves and might cause physical damage to chicon. Although the forced air cooling showed the effect on maintaining quality of chicon, but additional studies should be needed that investigated proper air flow rate and cooling box structure can prevent physical damage by air flow.

• Journal of Bio-Environment Control
• /
• v.17 no.2
• /
• pp.116-123
• /
• 2008

This study was carried out to investigate into the effect of light-emitting diode (LED) for the light quality as a light source on the broccoli seed germination and the physiological activity of vegetable sprouts. We have also germinated seeds of the broccoli and applied LED as a light quality such as blue, green, red, white, yellow and red + blue color lights to their sprouts for 14 hours and kept dark for 10 hours at the temperature of $25^{\circ}C$ (day)/$18^{\circ}C$ (night). Broccoli sprouts were extracted by methanol and their physiological activities were examined. All broccoli seeds were germinated at 3 days after seeding regardless of the light color. Total sprout fresh weight were mostly became highest by 0.389g (10 plants) at 8 days after seeding when their sprouts were grown under blue color light. Total phenol compound contents in broccoli sprouts were extremely increased by $83.0\;mg{\cdot}L^{-1}$ under the white light, and total flavonoid contents were most much more by $72.6\;mg{\cdot}L^{-1}$ under the blue light. DPPH radical scavenging activity at $2,000\;mg{\cdot}L^{-1}$ were most highest by 93.5% in broccoli sprouts grown under the white light. Nitrite radical scavenging activity at the concentration of $500\;mg{\cdot}L^{-1}$ in sprout extracts were the most increased by 66.9% under the yellow light, and tyrosinase inhibition activity at $2,000\;mg{\cdot}L^{-1}$ in sprout extracts were by 14.5% under red light.

• Journal of Life Science
• /
• v.19 no.9
• /
• pp.1218-1225
• /
• 2009

Difractose anhydrides (DFAs) is studied as a sweetener for diabetics because of its structural property. DFAs have four types: DFA I, III, IV (degradation of levan) and V (degradation of inulin). Especially, DFA IV has been shown to enhance the absorption of calcium in experiments using rats. Levan fructotransferase is an enzyme for producing di-d-fructose-2,6':6,2-dianhydride (DFA IV). To identify structural characterization, we purified wild-type and mutants (D63A, D195N and N85S) of levan fructotransferase (LFTase) from Microbacterium sp. AL-210. These proteins were purified to apparent homogeneity by Ni-NTA affinity column, Q-sepharose ion exchange and gel filtration chromatography and detected by SDS-PAGE. They were also analyzed by circular dichroism (CD) measurements, JNET secondary structure prediction, activity measurements at various temperatures, and pH analysis. The optimum pH for the enzyme-catalyzed reaction was pH 7.5 and optimum temperature was observed at $55^{\circ}C$. Along with wild-type LFTase, mutants were analyzed by CD measurement, fluorescence analysis and differential scanning calorimetry (DSC). N85S showed less $\alpha$-helix and more $\beta$ strand than others. Also, N85S showed almost the same curve as wild-type in their steady-state fluorescence spectra, whereas mutant D63A and D195N showed higher intensity than wild-type. The amino acid sequence of wild-type LFTase was compared to the sequences of exo-inulinase from Aspergillus awamori, a plant fructan 1-exohydrolase from Cichorium intybus, and Thermotogo maritime (Tm) invertase and showed a high identity with Exo-inulinase from Aspergillus awamori.