• The Korean Journal of Pesticide Science
• /
• v.10 no.1
• /
• pp.1-6
• /
• 2006

A methodology for the syntheses of carboxanilides using solid support of 4-chloro-3-nitorbenzophenone oxime resin 5 was developed. Condensation of 4-chloro-3-nitorbenzophenone resin 6 with hydroxylamine hydrochloride salt gave oxime resin 5. The reaction of oxime resin 5 with dioxin and oxathiin derivatives 7a-d afforded the corresponding polymer-bound dioxin and oxathiin derivatives 9a-d. These polymer-bound resins 9a-d were treated respectively with aniline in the presence of acetic acid resulted in the corresponding dioxin carboxanilides 10a-d (yield, 5%-quantitative).

• Journal of the Korean Chemical Society
• /
• v.39 no.8
• /
• pp.611-616
• /
• 1995

Oxovanadium(IV) complexes with salicylaldoxime, o-vanilline oxime, 2-hydroxy-4-methoxybenzaldoxime, 2-hydroxy-5-methoxybenzaldoxime and 2-hydroxy-5-nitrobenzaldoxime were synthesized. The complexes have been characterized by elemental analysis, electric conductivity measurement, infrared spectrometry, electronic spectrometry, mass spectrometry, and thermal analysis. The results of elemental analysis were well coincided with the theoretical values. The values of molar conductance of the complexes in DMF implicated that the complexes were non-electrolyte. The characteristic stretching frequency of V=O appeared strong band in the range of $980{\pm}20\;cm^{-1}.$ All the complexes showed two d-d transition in visible spectra and two charge transfer transitions in ultraviolet spectra. Results of mass spectrometry of $VO(sal)_2\;and\;VO(van)_2$ indicated two peaks corresponding to vanadium containing ion(I) of 1 : 2(metal to ligand) chelate and a fragment ion(II) of 1 : 1 chelate due to loss of ligand radical from ion(I). The thermal analysis showed the endothermic peak due to the thermal decomposition.

• Journal of the Korean Chemical Society
• /
• v.27 no.4
• /
• pp.268-272
• /
• 1983

Polyurethane foam impregnated with ${\beta}$-diphenylglyoxime has been applied to the extraction of palladium(II) from platinum(IV) and nickel(II) in aqueous solution. Palladium(II) is quantitatively extracted from $0.01{sim}0.05M$ HCl. On the other hand, platinum(Ⅳ) was slightly extracted and nickel(II) was not found to be extraction in the same experimental condition. Based on the results obtained, the selective separation, removal and recovery of Pd(II) from Pt(IV) or Ni(II) was possible by batch or elution method.

• YAKHAK HOEJI
• /
• v.46 no.5
• /
• pp.320-323
• /
• 2002

A method for the determination of acidic drug, mefenamic acid and ibuprofen with ion-selective electrode(ISE) using Fe(II)-di-2-pyridyl ketone oxime complex as a counter ion were developed. Benzyl-2-nitrophenyl ether(BNPE) plasticized membrane was more selective and sensitive than the other tested membranes. The acidic drug selective electrode exhibits a linear response for 10$^{-2}$ M 510$^{-5}$ M of acidic drugs, mefenamic acid and ibuprofen with a slope of -55.9 and -56.3 mV/dec. in borate buffer solution (pH 8.9). Potentiometric selectivity measurements revealed negligible interferences from aromatic and aliphatic carboxylic acid salts. The electrodes were found to be useful for the direct determination of mefenamic acid and ibuprofen in pharmaceutical preparations.

• Journal of the Korean Chemical Society
• /
• v.39 no.7
• /
• pp.552-558
• /
• 1995

The tetranuclear complexes, $X_2[M_{O4}O_12{R'C(NH_2)NO}_2](X= n-Bu_4N^+$, $R'=(CH_3)_2CH$, $CH_3CH_2CH_2$, $CH_3SCH_2$; $X=(CH_3)_2CHC(=NH_2)NH_2^+$, $R'=(CH_3)_2CH$; $X = CH_3CH_2CH_2C(=NH_2)NH_2^+$, $R'=CH_3_CH_2CH_2$; $X=CH_3SCH_2C(=NH_2)NH_2^+$, $R'=CH_3SCH_2)$ have been synthesized by the reactions of monomeric and polynuclear complexes with isobutyl-, butyl- and thiomethylacetamidoxime. The prepared complexes were identified by elemental analysis, infrared, $^1H$ NMR and $^{13}C$ NMR spectroscopy. The structure of complex ${(CH_3)_2CHC(NH_2)_2}_2[M_{O4}O_{12}{(CH_3)_2CHC(NH_2)NO}_2]$ was determined by X-ray single crystal diffraction. Crystal data are follows: Monoclinic, $P2_{1/c}$, $a=10.168(3){\AA}$, $b=11.768(1){\AA}$, $c=13.557(1){\AA}$, ${\beta}=102.08(1)^{\circ}$, $V=1586.2(5){\AA}^3$, Z=2, final R=0.026 for 2951($F_0>3s(F_0)$). This complex is composed of a planar cyclic $[Mo_4({\mu}-O)_4]$ and two ${\mu}_4$-amidoximate.

• Journal of the Korean Chemical Society
• /
• v.21 no.2
• /
• pp.139-148
• /
• 1977

The rate of oxime formation of 2-furfural and 5-substituted-2-furfurals such as 5-methyl-2-furfural, 5-isopropyl-2-furfural, 5-tert-butyl-2-furfural, 5-isoamyl-2-furfural and 5-nitro-2-furfural have been measured at 15∼$45^{\circ}C$ in aqueous solution buffered at pH 7. Oxime formation for all the compounds investigated is second-order reaction and their activation energies observed are 5.50, 7.22, 7.03, 7.49, 7.78 and 4.97 kcal/mole, respectively. Hammett equation is obtained for 5-alkyl-2-furfurals and the reaction constants (${\rho}$) calculated at 15, 25, 35 and $45^{\circ}C$ are 2.010, 1.756, 1.541, and 1.311 respectively.

• Journal of the Korean Chemical Society
• /
• v.23 no.1
• /
• pp.42-45
• /
• 1979

The experimental procedures of Beckmann rearrangement mostly involve the use of vigorous conditions such as strongly acidic reagents (conc. HCl, $H_2SO_4$, $PCl_5$, etc.) or elevated temperatures, which frequently cause isomerization of ketooximes prior to rearrangement.We have effected the Beckmann rearrangement on $5{\alpha}$-cholestan-3-one oxime using the carbon tetrachloride-triphenylphosphine reagent under mild, neutral conditions to give 3-aza-A-homo-$5{\alpha}$-cholestan-4-one. This new, mild, facile and rapid general method of Beckmann rearrangement is presented, and compared with the classical (more conventional) Beckmann reagent of polyphosphoric acid.

• Polymer(Korea)
• /
• v.36 no.2
• /
• pp.119-123
• /
• 2012

Adhesion strength of polyurethane adhesive for laminated metal plate was investigated. Also, the effect of laminating conditions on the adhesion strength was understood by measuring peel strength as a function of adhesion temperature and time. The amount of isocyanate appearing due to the unblocking of oxime in polyurethane adhesive affected the strength of adhesion with hydroxyl on the metal plate or aluminum foil and it was controlled by adhesion temperature and time. However, the excess of temperature and time in laminating process caused the lowering of adhesion strength because of the decrease of solvent content as well as thermal degradation of the adhesive.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2023.05a
• /
• pp.255-256
• /
• 2023

The development of corrosion inhibitors with outstanding performance is a never-ending and complex process engaged in by researchers, engineers and practitioners. Computational assessment of organic corrosion inhibitors performance is a crucial step towards the design of new task-pecific materials. Herein, electronic features, adsorption characteristics and bonding mechanisms of two pyridine oximes, namely 2-pyridylaldoxime (2POH) and 3-pyridylaldoxime (3POH) with the iron surface were investigated using molecular dynamics (MD), and self-consistent-charge density-unctional tight-binding (SCC-DFTB) simulations. SCC-DFTB simulations revealed that 3POH molecule can form covalent bonds with iron atoms in its neutral and protonated states, while 2POH molecule can only bond with iron through its protonated form, resulting in interaction energies of -2.534, -2.007, -1.897, and -0.007 eV for 3POH, 3POH+, 2POH+, and 2POH, respectively. Projected density of states (PDOSs) analysis of pyridines-Fe(110) interactions indicated that pyridine molecules chemically adsorbed on the iron surface.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.27 no.4
• /
• pp.528-534
• /
• 2024

In continuous research of detecting highly toxic chemical warfare agents to ensure preparedness for the future battlefield, flexible and wearable sensor platforms with high sensitivity are still demanding. Herein we demonstrate a facile fabrication of polypyrrole-based chemiresistors on cellulose paper for the detection of nerve gas simulants. In order to optimize electrical properties of sensor platform, conducting polymer made of polypyrrole were first synthesized on flexible cellulose paper and interdigitated electrodes were formed thereon. Following confirmation of polypyrrole and/or oxime moiety through FT-IR analyses, electrical characteristics were measured in the various ratio of monomers between simple pyrrole and oxime-modified one. Typically for the optimized chemiresistor(2:8 molar ratio of simple pyrrole and oxime-modified one), eleven species of chemical warfare agents were examined and enhanced conductivity(10⁴~10⁵ order) was observed for three simulants(diethyl cyanophosphonate, diisopropyl fluorophosphonate and diethyl chlorophosphonate), which was mainly attributed to intermolecular hydrogen bonding, while no significant responses was recorded against sixteen common volatile organic chemicals.