• Korean Journal of Food Science and Technology
• /
• v.22 no.1
• /
• pp.99-104
• /
• 1990

The effects of concentrations of sulfur dioxide (0.16-0.20%) and steeping times (25-50hr) at $52^{\circ}C$ on the changes in pH of steep water and weight and volume of corn and starch properties were investigated. The pH of steep water increased and remained constant after steeping time of 20 hours. The degree of weight or volume gain decreased as the concentration of sulfur dioxide increased. The protein content of starch increased as the concentration of sulfur dioxide increased. Water·binding capacity of starch showed the highest value at the steeping time of 35 hours. Swell ins power and solubility decreased as cocentration of sulfur dioxide and steeping time increased. The initial pasting temperature and peak viscosity were increased and decreased, respectively, as the concentration of sulfur dioxide increased. At the same concentration of sulfur dioxide, the peak viscosity was increased and then decreased. Viscosity of starch in sodium hydroxide solution tended to decrease as the concentration of sulfur dioxide and sleeping time increased. The gel volume of starch in 3M KSCN solution was not affected by concentration of sulfur dioxide and steeping time.

• Applied Chemistry for Engineering
• /
• v.18 no.6
• /
• pp.557-561
• /
• 2007

Polypropylene (PP)/corn starch master batch (starch-MB) blends with different PP compositions of 40, 50, 60, and 80 wt% were prepared by melt compounding at $200^{\circ}C$, using lab scale Brabender mixer. The chemical structures and thermal properties of the PP/starch-MB blends were investigated by FT-IR, differential scanning calorimetry (DSC), and thermogravimetric analyzer (TGA). The chemical structure was confirmed by the existence of hydroxy group. There was no district change in melting temperature and melting enthalpy, and TGA curve indicated a decrease in degradation temperature with starch-MB content. The porosity change of blend was measured by scanning electron microscope (SEM), the degree of porosity on the blend surface increased with the starch-MB content. The rheological properties indicated an increase in complex viscosity, shear thinning tendency and elasticity with the starch-MB concentration. These effects were confirmed by an oscillatory viscometer at $200^{\circ}C$. From these results, it is found that 40 wt% is the optimum starch-MB concentration. The fiber was fabricated from PP60/MB40 with 40 wt% starch-MB and the porosity and tensile properties were investigated.

• Applied Biological Chemistry
• /
• v.29 no.4
• /
• pp.339-345
• /
• 1986

Rheological characteristics of starch isolated from germinated corn were investigated and compared with those of nongerminated corn starch. Flow behavior of both starches were Bingham psudoplastic. Consistency index and yield stress of germinated starch solution were lower than those of nongerminated starch solution, while flow behavior index was nearly similar. Concentration dependency of both starch solutions were similar to each other but lower temperature dependency of germinated starch solution was observed. Time dependent characteristics of both starches showed thixotropic behavior, but due to germination, germinated starch showed higher structural decay under shear than nongerminated starch and its elastic properties was weaker.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.31 no.5
• /
• pp.770-774
• /
• 2002

The effect of mixing ratio of materials and their retort processing conditions on the physical properties and preference of oyster porridge were investigated. Rice gave adequate viscosity (about 800 cp) to the porridge as it was used 10～12% level and half of it was ground. Potato starch, waxy corn starch, and Perfectamyl AC showed small variation in viscosity unrelated to the temperature, that was a good condition for high quality porridge. Especially, waxy corn starch had a good property for retort porridge because its viscosity was maintained high during the processing and decreased to preferable one after processing. Purity CSC, modified starch gave gum-like texture and didn't cause water-separation much after freezing and thawing treatment of the porridge. Therefore, it was good for enhancing the physical property of the porridge as a co-additive of waxy corn starch when it was used at quarter level of waxy corn starch. Xanthan gum increased dispersibility of materials and it was useful for stabilizing physical quality of the porridge without affecting preference when it was used below 0.2% concentration. As a result, the optimal material-mixing ratio was determined as rice 10% (50% of it was ground), waxy corn starch 1.5%, Purity CSC 0.5%, xmthan gum 0.2%, salt 0.3%, and water 87.5%. Oyster's porridge, retort processed with this recipe, showed stable physical property after 6 month storage at room temperature.

• Food Science and Industry
• /
• v.41 no.2
• /
• pp.27-29
• /
• 2008

• Food Science and Preservation
• /
• v.20 no.1
• /
• pp.97-103
• /
• 2013

The effects of gamma irradiation at medium dose levels on commercial starches (corn starch/CS, sweet potato starch/SS, and potato starch/PS) were investigated in terms of its color and lipid oxidation. The CS, SS, and PS samples were irradiated at 0, 1.5, 3, 4.5 and 6 kGy by a Co-60 gamma irradiator and used for measuring Hunter's colors and TBA value. Irradiation doses applied did not cause apparent changes in Hunter color parameters between the control and irradiated groups. But, the decrease in lightness (L value) for CS and the increase in both redness (a value) for SS and yellowness (b value) for PS were observed, respectively, thereby resulting in slight increase in overall color difference (${\Delta}E$) upon irradiation. Browning intensity observed with the naked eye for gelatinized starches by irradiation doses was also gradually increased along with irradiation dose, which was more remarkable in SS. The thiobarbituric acid (TBA) values of samples showed a dose-dependant increase with ${\geq}0.9964$ of $R^2$ (p<0.05).

• Korean Journal of Food Science and Technology
• /
• v.27 no.1
• /
• pp.30-35
• /
• 1995

Gamma irradiation was applied to non-glutinous and glutinous corns for improving starch isolation process. No significant changes in proximate composition of corn grains were observed by gamma irradiation. Irradiation at 1 and 5 kGy was effective for sterilizing all contaminated microorganisms of non-glutinous and glutinous corns, respectively. The moisture-uptake rate constants were increased in proportional to the steeping temperature and applied irradiation dose level. The irradiation efficacy on water absorption properties was also recognized in the corns stored for six months at room temperature. The combined use of gamma irradiation with sulfur dioxide solution was very effective for reducing steeping time. The starch yield gradually increased as irradiation dose levels increased. At 2 kGy, the sarch yield of non-glutinous and glutinous corns increased by 38% and 27%, respectively. No significant difference in Hunter's color value was observed between the starches isolated from nonirradiated and irradiated corn grains.

• Journal of Animal Science and Technology
• /
• v.45 no.3
• /
• pp.421-432
• /
• 2003

The objective of this study was to examine the effects of processing methods of corn grains on protein and starch degradability in the rumen by three ruminally cannulated dry Holstein cows. The corns for these experiments were untreated; whole corn L(density; 660 g/$\ell$), whole corn H(density; 740 g/$\ell$), and treated by four different types: Ground corn, 3.8 mm, 2.8 mm, and 1.5 mm flaked corn. The results obtained were summarized as follows: For 48 hrs, the protein degradabilities were high in order, ground corn, 1.5 mm, 2.8 mm, and 3.8 mm flaked corn(82.6, 76.5, 64.5, and 33.9%, respectively). Flaked corn grains were degraded lower than ground corn. However, as increasing the processing degree of flaking, the protein degradabilities, from 4 hrs to 48 hrs, were increased. The starch degradabilities on 48 hrs were higher in 1.5 and 2.8 mm flaked corns, ground corn, 3.8 mm flaked corn(99.1, 91.5, 89.5, and 68.9%, respectively) than whole corn L(32.0%) and whole corn H(20.5%)(P<0.05). By increasing the processing degree of flaking, the protein degradabilty between 2.8 mm and 3.8 mm was increased significantly from 68.9% to 91.5%, however, that of 1.5 mm flaked corn, processed thinner, tended to be increased slightly, but was not significantly different. From 12 hrs to 24 hrs, whole corn L was degraded little more than whole corn H in starch, was not significantly different. However, after 48 hr incubation in the rumen, whole corn L was degraded more 50% than whole corn H(P<0.05). The value of degradation parameter “a” of protein was lower in all flaked corns than in ground corn. In contrast, the value of degradation parameter “a” of starch was significantly higher in all flaked corns than in ground corn(P<0.05). It seemed that by flaking the corn grains, starch particles were gelatinized, and then, starch was degraded more rapidly, while protein was degraded more slowly. Referring to these kinds of physical characteristics of grain sources in ruminal degradabilities, it is possible to synchronize the fermentation of nitrogen and carbohydrate sources, in formulating the cattle diets.

• Korean Journal of Food Science and Technology
• /
• v.36 no.4
• /
• pp.547-552
• /
• 2004

Attempt was made to establish identification methods for irradiated starch. Commercial starches (corn starch/CS, sweet potato starch/SS, and potato starch/PS) were irradiated at 0-6.0 kGy and used to measure viscosity with Brookfield DV-III programmable rheometer. Starch suspensions were prepared at 8.0 (7.2%, d.b.), 8.5 (7.3%, d.b.), and 9.0% (7.3%, d.b.) for CS, SS, and PS, respectively at 100 rpm in spindle speed. Results showed viscosities of samples significantly decreased (p<0.05) as irradiation dose increased, with $R^2$ 0.9754, 0.9618, and 0.9888 for CS, SS, and PS, respectively. Irradiation dose at 1.5 kGy induced decrease in viscosity as compared to non-irradiated control by 34, 57, and 51% in CS, SS, and PS, respectively, suggesting viscometry could lie applied to identify irradiated starches. Solubility and alkali number of irradiated starches significantly increased with irradiation doses, while swelling power decreased (p<0.05). Results suggested solubility, alkali number, and swelling power for irradiated starches complement identification results of viscometry.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.39 no.4
• /
• pp.573-579
• /
• 2010

This study investigated starch properties of 'Daehak waxy corn (DWC)' with different harvest times. The DWCs were harvested at 4 days before suitable time (BST), suitable time (ST) and 4 days after suitable time (AST). As harvest time was delayed, starch yield and amylopectin content of DWC starch increased from 43.21 to 52.73%, and from 90.79 to 92.83% based on dry weight, respectively. As harvest time was postponed, enzymatic digestibility and water solubility of DWC starch decreased from 81.43 to 80.58%, and from 10.23 to 9.23%. However, water binding capacity and swelling power of DWC starch increased from 227.94 to 244.88%, and from 24.75 to 29.74%, respectively. Retrogradation viscosity of starch was the lowest in DWC harvested at AST. There was a high correlation coefficient among starch properties of DWC, such as starch yield, enzymatic digestibility, water binding capacity, swelling power, water solubility and retrogradation viscosity (p<0.01). As harvest time was deferred, enzymatic digestibility, water solubility and retrogradation viscosity decreased; however, amylopectin content increased, and water binding capacity and swelling power significantly increased with increasing amylopectin content.