• Journal of the Korean Association of Geographic Information Studies
• /
• v.8 no.2
• /
• pp.31-43
• /
• 2005

Four time points of the fractional area data during the 15 years of the highest group of land surface temperature and the lowest group of NDVl of the Kunsan city Chollabuk_do, Korea located beneath the Yellow sea coast, are observed and analyzed their correlations for the intention to detect the changes of urban land cover. As long as the effective contributions of satellite images in the continuous monitoring of the wide area for wide range of time period, Landsat-5 TM and Landsat-7 ETM+ artificial satellite images, acquisited over the Kunsan city area, are surveyed by the compared calibration after quantization and classification of the deviations between TM and ETM+ images substituted approved error correction thresholds such as gains and biases or offsets. This experiment and research applied Landsat-5 TM and Landsat-7 ETM+ artificial satellite images in change detection of urban land cover in urbanized Kunsan city, then detected strong and proportional correlation relationship between the highest group of land surface temperature and the lowest group of NDVI which exceeded R=(+)0.9478, so the proposed Correlation Analysis Model between the highest group of land surface temperature and the lowest group of NDVI will be able to give proof an effective suitability to the land city change detection monitoring.

• Journal of the Korean earth science society
• /
• v.38 no.7
• /
• pp.496-510
• /
• 2017

This study presents a new nationwide quantitative precipitation estimation (QPE) based on the hybrid surface rainfall (HSR) technique using the weather radar network of Korea Meteorological Administration (KMA). This new nationwide HSR is characterized by the synthesis of reflectivity at the hybrid surface that is not affected by ground clutter, beam blockage, non-meteorological echoes, and bright band. The nationwide HSR is classified into static (STATIC) and dynamic HSR (DYNAMIC) mosaic depending on employing a quality control process, which is based on the fuzzy logic approach for single-polarization radar and the spatial texture technique for dual-polarization radar. The STATIC and DYNAMIC were evaluated by comparing with official and operational radar rainfall mosaic (MOSAIC) of KMA for 10 rainfall events from May to October 2014. The correlation coefficients within the block region of STATIC, DYNAMIC and MOSAIC are 0.52, 0.78, and 0.69, respectively, and their mean relative errors are 34.08, 30.08, and 40.71%.

• Analytical Science and Technology
• /
• v.25 no.6
• /
• pp.364-369
• /
• 2012

Isotianil is a novel fungicide which induces systemic acquired resistance in plants. It has excellent preventive effects as low dosages against rice blast which is one of the most serious diseases in rice. The Maximum Residue Limit (MRL) of Isotianil in republic of korea was set to 0.1 mg/kg in rice, so it is necessary to determine levels of Isotianil residues in agricultural commodities for controlling food safety. Therefore, The purpose of this study was to develop analytical method for the determination of isotiical residues in agricultural commodities using GC-NPD/MSD. Isotianil was extracted with acetonitrile from apple, chinese cabbage, hulled rice, mandarin, pepper, and soybean. The extract was diluted with saline water, and then dichloromethane partition was followed to recover this fungcide from the aqueous phase. A solid phase extraction with Florisil cartridge was additionally employed for final clean up. Isotianil was analyzed and quantitated by GC-NPD and confirmed by GC-MSD. Average recovery of Isotianil ranged from 70.0 to 103.9% in six representative agricultural commodities with relative standard deviations less than 10%, and limit of quantification (LOQ) was 0.05 mg/kg.

• Journal of the Korean Society for Precision Engineering
• /
• v.26 no.2
• /
• pp.101-108
• /
• 2009

A fretting wear test rig for dry ambient condition, which employs a piezoelectric actuator, has been developed. It is driven and loaded in a very simple manner with acceptable experimental accuracy. By using the rig, Inconel 690 tube has been tested under the normal load of 10 and 15N with sliding amplitude of less than $100{\mu}m$ during $10^6$cycles. The wear resistance of the material has been characterized in terms of the wear coefficient based on the work rate model. SEM micrographs show the complex structures of the scars, which consist of risen peaks, plate-type thin layers and locally exposed bare surfaces. The cracks spread over the layers give clue to the fretting wear mechanism of the material.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2006.05a
• /
• pp.1641-1645
• /
• 2006

수문순환과 수질오염과정의 제반 기작들이 완벽하게 규명되지 않은 상황에서 인위적 또는 자연적 조건에 따른 수질의 평가는 수질모형으로서 추정하는 것이 유일한 대안이며, 다양한 관리대안에 따른 수질환경변화를 예측함으로서 합리적인 관리방안을 도출하는데 유용한 수단이 되고 있다. 현재 시행 중인 수질오염총량관리제에서 또한 수질모형은 핵심적인 역할을 담당하고 있으며, 보다 구체적으로는 단위유역의 목표수질을 결정하는 것에서부터 기본계획 또는 시행계획에 따른 오염부하량 등 환경요인의 변화와 이에 따른 목표수질 설정지점의 수질 변화 등을 모의하는데 이용되고 있다. 그러나 모형에 사용되는 입력 매개변수의 불확실성과 이에 관련된 수질 모형 자체의 불확실성은 수질오염총량관리제와 같이 많은 이해당사자가 관여된 정책의 결정 시에는 공학적으로 많은 부담으로 작용하고 있는 것 또한 현실이다. 실제로 미국의 오염총량관리제의 경우를 살펴보면 모형의 불확실성 분석이 전체 과정의 진행에서 가장 핵심적인 지위를 차지하고 있다고 볼 수 있다. 많은 연구들이 수질모형에 있어서의 불확실성을 정량화하기 위하여 수행되어 왔으며, 특히 미국의 오염총량관리계획의 수립 시에는 이러한 불확실성 분석을 토대로 하여 안전율을 산정하도록 되어있다. 그러나 이러한 연구들의 대부분은 수질모형의 매개변수 중 수질기작에 관련된 매개변수들(예를 들어, DO, BOD, N, P 등에 대한 반응계수)에 대한 연구에 집중되어 있다. 하천의 수질을 적절하게 모델링하기 위해서는 이러한 수질에 직접적으로 관련한 매개변수들 이외에 하천의 수리특성에 관한 올바른 이해를 바탕으로 그와 관련된 수리학적 매개변수들에 대한 연구가 뒷받침되어야 한다. 그동안 수행되어온 수질 모델링의 적용 사례를 살펴본 바에 따르면 하천을 모델링하기 위해서는 현장 특성 자료의 중요성, 특히 하천수리특성에 관련된 기초 자료의 가용성 여부가 모형의 성패에 매우 중요한 역할을 함을 알 수 있다. 이는 유량, 유속 및 폭과 깊이로 대변되는 하천 지형은 물질 이송에 대한 주요 외력 함수이며, 다른 모든 예측치들은 이들에 의존적일 수밖에 없기 때문이다. 따라서 이들의 정확한 표현은 올바른 수질 예측에 있어서 필수적일 수밖에 없다. 많은 모형매개변수들이 유속과 깊이에 의존적이나, 이들에 관한 정보는 종종 현장관측에서 조차 무시되는 경우가 많다. 이에 본 연구에서는 수질모형의 매개변수 중 특히 수리특성에 관련된 매개변수들이 수질에 미치는 영향을 파악하는 것을 목적으로 하고 있다. 이를 위해 적용된 수질모형은 QualKo를 사용하였으며, 대상 하천은 낙동강 본류 경남구간 시점 부근인 회천 합류 전부터 낙동강 본류 경남구간 종점 부근인 밀양강 합류 전까지의 경남 오염총량관리 기본계획 시 구축된 모형 매개변수를 바탕으로 분석을 수행하였다. 일차오차분석을 이용하여 수리매개변수와 수질매개변수의 수질항목별 상대적 기여도를 파악해 본 결과, 수리매개변수는 DO, BOD, 유기질소, 유기인 모든 항목에 일정 정도의 상대적 기여도를 가지고 있는 것을 알 수 있었다. 이로부터 수질 모형의 적용 시 수리 매개변수 또한 수질 매개변수의 추정 시와 같이 보다 세심한 주의를 기울여 추정할 필요가 있을 것으로 판단된다.

• Journal of the Korean Geophysical Society
• /
• v.9 no.1
• /
• pp.47-62
• /
• 2006

More than 70% of Korean Peninsula is consisted of mountains, so that lots of roads, rail-roads and tunnel,which play a pivotal role in the industry activity, are existed along the rock-slope and in the rock-mass. Thus,it is urgent that tegration of management system through the optimum survey and design of rock-slope excavation, proper stabilization method and database of rock-slope. However, conventional methods have shortcoming with the economy of survey time and human resources, and the overcome of difficulties of approach to the in-situ rock-slope. To overcome the limitation of conventional method, this paper proposed the development of remote measurement system using Terrestrial Laser Scanning System. The method using Terrestrial 3D Laser Scanning System, which can get 3D spatial information on the rock-slope and2)Dept. Geosystem Engineering, Kangwon National University, Korea tunnel, has an advantage of reduction of measurement time and the overcome of difficulties of approach to the in-situ rock-slope/dam/tunnel. In the case of rock-slope, through the analysis of 3D modeling of point-cloud by Terrestrial Laser Scanning System, orientation of discontinuity, roughness of joint surface, failure shape and volume were successively achieved. in the case of tunnel face, through reverse-engineering, monitoring of displacement was possible.

• The Journal of the Korea Contents Association
• /
• v.8 no.11
• /
• pp.203-209
• /
• 2008

Nowadays the risk of radiation is getting more serious, so we must know the exact dose that was irradiated, Because very high radiation dose is used in radiation therapy field. We used the ionization chamber which measure the radiation dose in this study. We tried to know the incorrect result from the distortion of geometric structure of ionization chamber and we studied how to find the distortion of geometric structure of ionization chamber. We used a radio fluoroscopy to find the wound degree of electrode of ionization chamber and a reconstructed 3D CT image to analyze the wound degree of electrode quantitatively. we measured degree of distortion by comparing with absorbed dose of normal electrode and wound electrode. The comparative result is not absolute dosimetry at specific point but relative dosimetry between thats. We measured 4 MV, 10MV photon with same absorbed dose and dose rate. The degree of distortion of wound electrode was totally $5.5{\sim}7.2%$, and there was no difference between two energies. The variation induced from radiation dose to be irradiated and dose rate, and the degree of distortion from wound direction also was almost similar value. We could find that the geometric structure of ionization chamber that can influence a basic measurement of radiation dose can be changed by old usage and inattention of management in this study, especially winding of electrode can be happened, in radiation therapy field, It is very important to keep precise radiation dose quantitatively.

• Analytical Science and Technology
• /
• v.25 no.5
• /
• pp.307-312
• /
• 2012

To perform inhalation toxicity test by using experiment animals, we set up an analytical method to monitor didecyldimethylammonium chloride (DDAC) in aerosol nebulized into inhalation chambers by ion chromatography. DDAC was adsorbed by XAD-2 resin and analyzed with conductivity detector. Recovery of DDAC desorbed by acetonitrile from XAD adsorbent was 87.8%. The method detection limit (MDL) and the limit of quantitation (LOQ) were 2.97 ${\mu}g/m^3$ and 8.92 ${\mu}g/m^3$, respectively. Repeatability was calculated as RSD 7.8% in the range of 0~20 ${\mu}g/mL$. Time needed to analyze a sample was less than 5 minutes. Therefore, the analysis of DDAC by ion chromatography was practically useful in monitoring DDAC in inhalation chambers with rapidity and sensitivity manner to perform inhalation toxicity test using experimental animals.

• Journal of Cadastre & Land InformatiX
• /
• v.51 no.1
• /
• pp.79-95
• /
• 2021

This study evaluates the applicability of determining cadastral surveying results using drone photogrammetry during the phase of determining cadastral surveying results, which is the most important stage of cadastral surveying, but known to be hardly objective and highly probable in causing a subjective misjudgment or mistake made by a surveyor. In the experiment to analyze the accuracy of boundary point extraction from drone photogrammetry results, by comparing the coordinate area of 22 parcels extracted from 2D and 3D images with the coordinate area measured from ground survey, the difference could be quantified as RMSE of 1.44m² for 2D and 0.32m² for 3D images. In addition, experiments to evaluate the determination of cadastral surveying result based on drone photogrammetry survey showed the RMSE measure of 0.346m towards N direction and 0.296m towards Y direction in comparison to the existing surveying results through data investigation. Based on these experiments, it is judged that cadastral surveying result based on drone photogrammetry can be determined without needing to conduct a location survey with an accuracy of approximately 0.3m in the graphical area, which also leads to possibility of reducing individual errors if drones images are used along with ground survey by objectifying the process of cadastral surveying results.

• Geophysics and Geophysical Exploration
• /
• v.24 no.1
• /
• pp.6-19
• /
• 2021

Subsurface physical properties can be obtained and imaged by seismic exploration, and various algorithms have been developed for this purpose. In this regard, root mean square error (RMSE) has been widely used to quantitatively evaluate the accuracy of the developed algorithms. Although RMSE has the advantage of being numerically simple, it has limitations in assessing structural similarity. To supplement this, full-reference image quality assessment (FR-IQA) techniques, which reflect the human visual system, are being investigated. Therefore, we selected six FR-IQA techniques that could evaluate the obtained physical properties. In this paper, we used the full-waveform inversion, because the algorithm can provide the physical properties. The inversion results were applied to the six selected FR-IQA techniques using three benchmark models. Using salt models, it was confirmed that the inversion results were not satisfactory in some aspects, but the value of RMSE decreased. On the other hand, some FR-IQA techniques could definitely improve the evaluation.