• The Proceedings of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.10 no.6
• /
• pp.62-72
• /
• 1996

In this paper, ozonizer using U-type lamp(Olamp) has been designed and manufactured, which can perform a role of lighting source and ozonizer by using photo and chemical methods. The discharge, spectrum, illuminance, ozone concentration, ozone generation, ozone yield and sterilization characteristics of Olamp have been studied. The important conclusions obtained from this paper can be summa'||'&'||'not;rized as follows. As a result of spectrum characteristics for Olamp, ultraviolet ray of a short wave'||'&'||'not;lengths and a visible ray are radiated. The illuminance of Olamp was found to be useful for "color distinctive and intermittent works in the dark working spaces" in accordance with KS A 3011. The ozone concentration of gaseous phase is inversely proportional to quality of supplied gas. Also, ozone conce tration and generation of gaseous phase are rised more commercial oxygen gas than those trial air gas for constant quality of supplied gas. Ozone generation and ozone yield of gaseous phase are proportion'||'&'||'not;al to ozone concentration of gaseous phase. The characteristics of liquid ozone concentration at distilled water are proportional to circulating velocity of fermentation chamber and ozone concentration of gas'||'&'||'not;eous phase. As a result, the sterilization characteristics of Escherichia coli have been obtained more than 97[ % J.

• Air Cleaning Technology
• /
• v.12 no.4 s.47
• /
• pp.87-93
• /
• 1999

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.3 no.4
• /
• pp.887-893
• /
• 1999

The characteristics of ozone generator targeted for air or water sterilizing in the vessel utilizing the surface corona discharge between the electrodes on the ceramic substrate was investigated by using the frequency control method. The frequency control was achieved by controlling the degree of resonance between the secondary winding inductance of transformer and the electrode capacitance of ceramic discharge plate, and the range of control was found to be 5 times of discharge current. This frequency control method showed the efficiency of 28 mP ozone generation and the stability within 3.4 % when the input voltage was varied within 40% range. The frequency control method is regarded to be more efficient way of corona discharge control compared to the conventional on/off control or voltage control methods.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.41 no.12
• /
• pp.13-19
• /
• 2004

We have been studied on the high concentration ozonized water production technology which substitute for the SPM wet cleaning solution process as the PR strip process after the photolithography process in the semiconductor and flat panel display manufacturing. In this work, we have developed the surface discharge type ozone generator which has the characteristics of the 12 ［wt%］ ozone concentration at the oxygen gas flow of 0.5［ℓ/min］ oxygen per cell and also developed the high efficiency ozone contactor for the mixing ozone gas with deionized water. As the production test results of the ozonized water, we obtained the ozonized water concentration above 80［ppm］ at the 10［wt%］ ozone gas concentration, and also had a good result of the PR strip rate of 147［nm/min］. at the 70［ppm］ ozonized water.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.4
• /
• pp.544-549
• /
• 2017

This paper aims to examine the effect of rotational fluid motion about the efficiency of the gas - liquid ejector, which is a core unit in a ship equilibrium water treatment system. The ejector is a device for injecting ozone into ship equilibrium by the negative pressure generated by exchange of momentum between water and ozone. The existing ejector ejects the driving fluid with a simple form. In this paper, however, a rotation induction device is applied to the driving nozzle so that the driving fluid can be rotated and injected. To investigate the flow characteristics by the rotational movement of the driving fluid, CFD was used. The pressure and flow rate of the driving fluid, the negative pressure and suction flow rate of the suction fluid in the suction part, and the discharge pressure were predicted. On the basis of the results, the efficiency of the ejector using the rotation induction system was 22.25%, which was about 1.7% better than that of the existing ejector. Finally, to verify the feasibility of the CFD, an experiment was conducted on the ejector using the rotation induction device and the results were similar to those of the CFD.

• Proceedings of the KIEE Conference
• /
• 1985.07a
• /
• pp.220-223
• /
• 1985

• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.192.1-192.1
• /
• 2016

최근 들어, 열악한 실내 공기 환경과 미세 먼지의 유입으로 아토피 피부염, 알레르기성 비염 및 천식 등의 감염성 질환이 증가하고 있다. 따라서, 공기 중 병원균(Airborne pathogens)을 친환경적으로 제거하는 기술이 요구되고 있는 추세이다. 본 연구에서 제안하는 시스템은 물을 이용하여 플라즈마를 발생시키는 시스템이다. 기존 플라즈마를 이용한 공기 정화 장치는 공기를 사용하여 플라즈마를 발생시키므로 오존과 같은 인체에 유해한 물질들이 발생되는 문제점이 있다. 하지만, 본 연구에서는 물을 사용하여 플라즈마를 발생시키므로 활성 라디칼들이 포함된 물을 미스트 형태로 분사하여 인체에 무해하며, 대기 중 병원균 살균이 가능한 장점이 있다. 물 플라즈마 젯 분사장치는 전원 공급 장치, 플라즈마 전극 그리고 플라즈마 노즐로 이루어져 있으며 주입되는 물을 기반으로 플라즈마를 발생시킨다. 장치의 특성을 분석하기 위하여, 오실로스코프로 전압 및 전류를 측정하였고 적정법을 이용하여 생성되는 활성 라디칼들의 농도를 측정하였다. 또한 살균 능력을 평가하기 위하여 병원균 중 대표적으로 대장균을 배양하여 살균 실험을 수행하였으며, 결과적으로 90% 이상의 대장균이 사멸하는 것을 확인하였다.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 1999.11a
• /
• pp.153-156
• /
• 1999

In this paper, a plate type ozonizer has been designed and manufactured to minimize the size of ozonizer. This ozonizer have following benefits : \circled1 convenience of shift and installation \circled2 maximize space utility. Therefore, ozone generation characteristics have been investigated by varying flow rate, supplied voltage and gap spacing of plate electrodes.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.17 no.4
• /
• pp.74-80
• /
• 2003

Ionic wind is produced by a corona discharge when a DC high voltage is applied across the point-to-plane gap geometry. The corona discharge phenomena have been investigated in several beneficial application fields such as electrostatic cooling, ozone generation, electrostatic precipitation and electrostatic spraying. Recently ionic wind might be used in aerodynamic, for example, heat transfer, airflow modification, and etc. In this work, in order to analyze the control behavior of the velocity and amount of ionic wind produced by the positive DC corona discharges. The ionic wind velocity was measured as a function of the applied voltage, diameter of the punched hole on plate electrode and separation between the point-to-plate electrodes. As a results, the airflow is generated from the tip of needle to the plate electrode in the needle-to-punched-plate electrode systems. The ionic wind velocity is linearly increased with an increase in applied voltage and ranges from 1 to 3 m/sec at the locations of 100-200 mm from the punched-plate.

• Food Science and Preservation
• /
• v.14 no.1
• /
• pp.54-60
• /
• 2007

Little information exists on how wash operations affect water quality, or the efficacy of sanitizers on vegetable quality and microbial reduction in fresh-cut carrot shreds. This study evaluated the efficacy of chlorine and ozone in reducing microbial loads and maintaining vegetable quality of carrot shreds. Fresh-cut carrot shreds were teated with various chlorine and ozone concentrations for differing times. The samples were then centrifuged to remove excess water, packaged in film, and stored at $5^{\circ}C$. The result indicated that varying the ozonated water wash time affected microbial growth the development of unpleasant odors, color, and the overall quality of carrot shreds. Ozonated water washing for 20 min maintained vegetable quality by inhibiting unpleasant odors, the development of whiteness, and by reducing microbial populations. A single chlorine water wash was effective and resulted in better vegetable quality when compared with two washes. Samples washed for 20 min in ozonated water, however, had better vegetable quality and smaller microbial counts compared to samples washed once in chlorine water A 20 min ozonated water wash is an attractive method for the maintenance of vegetable quality and shelf-life in fresh-cut carrot shreds.