• Journal of the Korea Institute of Military Science and Technology
• /
• v.16 no.5
• /
• pp.607-612
• /
• 2013

The effect of the flow actuator on the asymmetric vortex structure around the ogive-cylinder body with fineness ratio of 4 flying at the speed of Mach 0.1 at angle of attack of 50 degree is studied. The ogive-cylinder model is developed with the actuator placed near the nose tip and numerically simulated using the in-house CFD code named KFLOW. The numerical simulation employs two different actuator modeling: one is the boundary condition given by blowing normal to the surface and another shearing on the surface. The numerical simulation reveals that response of the vortex structure to the actuation is dependent on the type of modeling as well as the strength and direction of the actuation.

• Journal of Aerospace System Engineering
• /
• v.12 no.4
• /
• pp.57-63
• /
• 2018

IR thermography is a non-invasive method and used for the visualization of the surface temperature of the model. However, this technique only derives 2D results and not quantitative data. The goal of this study is to apply the 3D mapping technique for IR thermography. The wind tunnel model is an ogive-cylinder with a wind speed of 20 m/s ~ 80 m/s and the angle of attack ranging from $0^{\circ}$ to $90^{\circ}$. The real location of the model was made to correspond with the position of the IR image using the makers. Based on this result, quantitative results were obtained. The 3D mapping method was verified by comparing the separation point and the theoretical value.

• 한국전산유체공학회:학술대회논문집
• /
• 2007.04a
• /
• pp.130-133
• /
• 2007

A two-phase method in CFD has been developed and is applied to model the cavitation flow. The governing equation system is two-phase Navier-Stokes equation, comprised of the mixture mass, momentum and liquid-phase mass equation. It employs an implicite, dual time, preconditioned algorithm using finite difference scheme in curvilineal coordinates and Chien ${\kappa}-{\varepsilon}$ turbulence equation. The experimental cavitating flows around ogive-cylinder and venturi type objects are employed to test the solver. To prove the capabilities of the solver, several three-dimentional examples are presented.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2011.11a
• /
• pp.279-282
• /
• 2011

Projectile can be damaged during the storage and handling. Maximum range calculation of the ammunition was performed on the assumption that each projectiles have 1.5mm/3.3mm axisymetric dent on the surface. Drag coefficient for trajectory calculation was delivered from CFD using commercial software FLUENT. In the result of CFD, damaged projectiles those have 1.5mm/3.3mm axisymetric dent have similar drag coefficient compare with normal projectile in the region of subsonic. But, in supersonic region, drag coefficient was increased 3%, 9% each in average. In the result of trajectory calculation, Maximum rage was decreased 1%, 3% each.

• Journal of the Economic Geographical Society of Korea
• /
• v.17 no.4
• /
• pp.786-800
• /
• 2014

The aim of this article is to analyze the relationship between the change of the diversity of the industrial structure, and regional employmentability and the intensification of regional competitiveness, and consequently, is to present policy implications. As a result of the analysis of the whole industry such as the primary, secondary and tertiary industry in Chungnam Province, the existing strategic implementation on the employmentability and regional competitiveness throughout the policy on the existing specialized industries can be regarded as appropriate. However, under the condition that danger and stability in each industry are fluctuated and the internal and external circumstances are varied, the detailed analysis and rapid policy prescription on the primary and tertiary industry are required. Along with these results, policy implications are as follows; Firstly, in terms of effectiveness, regional policy are simultaneously conducted along with industrial, technological and regional development's policies while consider ing complex and comprehensive characteristics of the regional industry and rapid changing the global market conditions. Secondly, with respect to equity, regional policy is needed to implement by reducing the socio-economic gap across regions and mixing regional and sectoral policies along with regional and local uniqueness.