• 제목/요약/키워드: 오일분리

검색결과 133건 처리시간 0.021초

전산유동해석을 통한 가솔린 엔진용 오일분리기의 성능분석 (Performance Analysis of Oil Separators for Gasoline Engine Using CFD Simulation)

  • 김창수;박성영
    • 한국산학기술학회논문지
    • /
    • 제13권2호
    • /
    • pp.516-521
    • /
    • 2012
  • 본 논문은 전산해석을 수행하여 가솔린 엔진에 적용되는 오일분리기의 성능을 비교/분석하여 적정한 오일분리기를 선정하고자 하였다. 두 가지 다른 형태의 오일분리기를 해석하였으며, 포집된 오일입자를 분석하여 포집성능을 대표하는 d50과 포집효율을 계산하였다. 계산결과 모델 A는 우수한 포집성능과 효율을 나타내었고, 모델 B는 양호한 압력강하량 특성을 보였다. 크랭크 케이스의 압력이 높지 않고, 오일소모량이 적은 일반적인 가솔린 엔진의 경우에는 압력강하량이 우수한 모델 B 오일분리기를 추천한다. 크랭크 케이스의 압력이 높고, 오일소모량이 큰 엔진, 특히 오일입자의 오염이 치명적인 특수 배기처리장치를 장착한 엔진에는 큰 압력강하량과 우수한 포집효율을 가지는 모델 A 오일분리기를 추천한다.

오일분리기의 성능분석 (Performance Analysis of a Oil Separator)

  • 김창수;박성영
    • 한국산학기술학회:학술대회논문집
    • /
    • 한국산학기술학회 2011년도 추계학술논문집 2부
    • /
    • pp.593-595
    • /
    • 2011
  • 본 논문은 전산해석을 통하여 일반적으로 가솔린엔진에 적용되는 오일분리기의 성능을 분석하였다. 현재 상용화된 제품을 해석한 결과 Labyrinth부분에서는 포집 능력이 거의 없는 것을 확인하였다. 오일입자 포집효율이 전체적으로 분포되지 않고 5개의 작은 홀이 있는 격판 부분에서만 집중적으로 나타나는 것을 확인하였다. 또한, 일반적인 Cyclone형태의 오일분리기보다 압력강하량이 높은 것을 확인할 수 있었다.

  • PDF

실린더 헤드커버 내장형 오일분리 장치의 오일 직경별 분리효율에 관한 해석적 연구 (A Numerical Analysis of Oil Separation Performance Classified by Oil Mist Diameter for Cyclone Oil Separator)

  • 김형구;윤여빈;박영준;이성욱;조용석
    • 대한기계학회:학술대회논문집
    • /
    • 대한기계학회 2008년도 추계학술대회B
    • /
    • pp.3026-3031
    • /
    • 2008
  • In conventional closed-loop crankcase ventilation systems, the lubrication oil had to be re-circulated to the intake manifold, in the form of oil mist mixed with the blow-by gas. This blow-by gas containing the engine lubricant oil affects on the engine problems and the exhaust emissions. A high-efficient oil separator is required to minimize consumption of engine oil and reduce harmful emissions. In the conventional oil separator of CI engines, it has good oil separation performance even though separator design is simple, due to lots of the blow-by gas. As the emission regulation becomes severe, the oil separator for SI engines is also required. But in SI engines, separator design should be optimized, due to small size of oil particles and little amount of blow-by gas. In this study, oil separation performance classified by diameter of oil mist in cylinder head cover internal model which has three cyclones and two baffle plates for SI engine is calculated with CFD methodology.

  • PDF

화학적 항유화제에 의한 물/비튜멘 에멀젼의 분리특성 (Characteristics of Separation of Water/Bitumen Emulsion by Chemical Demulsifier)

  • 박근익;한삼덕;노순영;배위섭;이영우
    • 청정기술
    • /
    • 제15권1호
    • /
    • pp.54-59
    • /
    • 2009
  • 비튜멘으로부터 효과적으로 물을 제거하기 위하여 화학적 항유화제에 의한 물/비튜멘 에멀젼의 분리를 연구하였다. 비튜멘 에멀젼을 모사하기 위해 모사물질로 엔진오일(GS Caltex Deluxe Gold V 7.5W/30, Hyundai gear oil 85W/140)과 아스팔트(AP-5, KS M 2201, (주)동남유화)를 사용하여 예비실험을 수행하였다. 그리고 오일센드로부터 추출한 비튜멘을 이용하여 실험하였다. 예비실험으로 수행된 물/오일 에멀젼의 분리실험에서 함유화제를 첨가하지 경우 에멀젼이 분리되지 않았으며, 항유화제의 농도가 낮을 때 Hyundai 엔진오일은 GS Caltex 엔진오일보다 분리효율이 높았다. 그러나 GS Caltex 엔진오일에 비해서 분리효율의 증가율은 낮았다. Hyundai 엔진오일은 GS Caltex 엔진오일보다 점도가 높아서 물의 분산이 잘 이루어지지 않았기 때문으로 판단된다. 그리고 HLB (hydrophilic-lipophilic balance) 값이 높을수록 분리효율이 높았으며, 사용된 항유화제 중 TWEEN 20 (polyoxyethylene sorbitan monolaurate solution)이 가장 좋은 분리효율을 나타내었다.

사이클론 오일분리 장치 형상변화에 따른 유동 및 오일분리 성능에 관한 해석적 연구 (A Numerical Analysis of Flow Characteristics and Oil Separation Performance for Cyclone Oil Separator Designs)

  • 조용석;이성욱;우근섭;윤여빈;박영준;이덕영;김현철;나병철
    • 한국자동차공학회논문집
    • /
    • 제16권5호
    • /
    • pp.22-28
    • /
    • 2008
  • A closed type crankcase ventilation system has been adopted to engines to prevent emission of blow-by gas to atmosphere. In the early closed type crankcase ventilation system, blow-by gas which contains engine lubricating oil is re-circulated into the intake system. The blow-by gas containing oil mist leads to increased harmful emissions and engine problems. To reduce loss of the engine oil, a highly-efficient oil separation device is required. Principle of a cyclone oil separator is to utilize centrifugal force in the separator and, therefore, oil separator designs depend on rotational flow which causes the centrifugal force. In this paper, flow characteristics and oil separation performances for cyclone type designs are calculated with CFD methodology. In the CFD model, oil particle was injected on a inlet surface with Rosin-Rammler distribution and uniform distribution. The major design parameters considered in the analysis model are inlet area, cone length and outlet depth of the oil separator. As results, reducing inlet area and increasing cone length increase oil separation performance. Changes in outlet depth could avoid interference between rotational flow and outlet flow in the cyclone oil separator.

$CO_2$ 냉동시스템의 오일 분리기에서 PAG오일 분리 특성에 관한 실험적 연구 (An Experimental Study on PAG Oil Separation Characteristics of an Oil Separator for a $CO_2$ Refrigeration system)

  • 조은영;이성광;강병하;김석현
    • 대한설비공학회:학술대회논문집
    • /
    • 대한설비공학회 2008년도 하계학술발표대회 논문집
    • /
    • pp.271-276
    • /
    • 2008
  • The oil trap in oil separator is one of the most important characteristics for normal operation of compressor. In this study, oil separation characteristics has been investigated for $CO_2$/PAG mixture using a gravity type of oil separator. The experimental study has been carried out in the range of oil concentration 0 to 5 weight-percent and the mixture temperature range of $0^{\circ}C$ to $15^{\circ}C$. The results obtained indicate that oil separation ratio in oil separator is increased with an increase in the oil concentration and mixture temperature.

  • PDF

오일 분리기에서 $CO_2$/PAG오일 혼합물의 오일 분리특성에 관한 실험적 연구 (An Experimental Study on Oil Separation Characteristics of $CO_2$/PAG Oil Mixture in the Oil Separator)

  • 김경재;이성광;조은영;강병하;김석현
    • 대한설비공학회:학술대회논문집
    • /
    • 대한설비공학회 2008년도 동계학술발표대회 논문집
    • /
    • pp.131-136
    • /
    • 2008
  • The oil separation in an oil separator is one of the most important characteristics for proper compressor operation. In this study, a gravity type of oil separator is used. Oil separation characteristics has been investigated for $CO_2$/PAG mixture in the range of oil concentration 0 to 5 weight-percent and the mixture temperature range of $5^{\circ}C$ to $15^{\circ}C$ and $70^{\circ}C$ to $90^{\circ}C$. The results obtained indicate that the oil separation is increased with an increase in the oil concentration. It is also found that the oil separation in liquid state is increased with an increase in the mixture temperature while the oil separation in gas state is decreased.

  • PDF

피부에 폭로된 폐가솔린엔진오일로 인한 표적장기의 DNA adducts 형성과 d-라이모닌 세척효과에 대한 평가 (Inhibitory Effects of d-limonene Cleaning on the Formation of DNA Adducts in Skin and Lung of Mice Dermally Exposed to Used Gasoline Engine Oil)

  • Lee, Jin-Heon;Tlasdka, Glenn
    • 한국환경보건학회지
    • /
    • 제24권3호
    • /
    • pp.92-98
    • /
    • 1998
  • 작업장에서 근로자들이 엔진오일 등 각종 오일에 피부가 폭로되었을 때 이것을 쉽게 세척하기 위하여 일반적으로 솔벤트를 사용한다. 그러나 솔벤트를 사용하면 피부를 건조하게 만들 뿐만 아니라 오일에 함유되어 있는 각종 성분들을 피부내에 흡수되는 것을 촉진시킬 수 있어서 이에대한 대처방법이 요구된다. 특히 폐가솔닐엔진오일데는 방향족탄화수소(PAHs)와 같은 물질이 함유되어 있어 체내에 흡수되면 발암물질로 대사되어 표적장기(피부와 폐조직)에서 DNA adducts를 높은 수준으로 형성한다고 알려져 있다. 본 연구에서는 식물기름에서 구할 수 있는 d-라이모닌(Limonene)를 세척제로 사용하여 폐가솔린엔진오일의 폭로로 인하여 형성되는 DNA adducts를 $^{32}P-postlabeling방법으로 분석함으로써 d-라이모닌의 세척효과를 평가하고자 하였다. HDC(ICR) Br 자성마우스의 견갑골 부위에 있는 털을 제거하고 그 부위에 폐가솔린엔진오일을 폭로시키고 1시간과 8시간이 지난 다음에 d-라이모닌으로 각각 세척을 하였다. 마지막 폭로를 마치고 24시간이 지난 다음에 실험동물을 희생시켜 표적장기(폭로된 피부와 폐)에서 시료를 채취하였다. 먼저 시료에서 DNA를 분리하여 가수분해한 다음에 $^{32}P-postlabeling하여 DNA adducts를 분리하였다. 폐가솔린엔진오일만 폭로시킨 그룹의 피부와 폐조직에 형성된 DNA adducts가 각각 30.3$\pm$3.7과 15.7$\pm$2.4로서 대조군(2.5$\pm$1.0과 1.4$\pm$0.4)에 비하여 통계적으로 유의하게 높았고 (p<0.01), 또한 폐조직에서 보다 피부조직에서 통계적으로 유의하게 높았다(p<0.01). 폐가솔린엔진오일을 폭로시킨 후에 d-라이모닌으로 세척한 그룹에서는 피부와 폐조직에 형성된 DNA adducts가 통계적으로 유의하게 감소하였는데(p<0.01), 8시간 보다는 1시간이 지난 다음에 세척한 그룹에서 DNA adducts의 감소현상이 더 크게 나타났다. 결론적으로 피부에 폭로된 폐가솔린 엔진오일을 d-라이모닌으로 세척하면 폐가솔닐엔진오일내에 함유된 발암물질이 체내흡수되는 것이 억제되고, 피부와 폐조직 모두에서 DNA adducts의 형성을 감소시킬 수 있으며, 폐오일이 폭로된 후 빨리 세척하는 것이 더 효과적임을 증명하였다.

  • PDF

황칠나무 정유의 분리 및 특성 (Separation and Characteristics of Essential Oil from Dendropanax morbiferus)

  • 김승건;이호원
    • 공업화학
    • /
    • 제33권1호
    • /
    • pp.44-49
    • /
    • 2022
  • 열수 추출과 초임계 추출을 각각 사용하여 황칠나무(Dendropanax morbiferus, DM)로부터 에센셜 오일을 분리하고, 분리된 황칠나무 정유를 정성 및 정량 분석하였으며 에센셜 오일의 항산화 효과를 규명하였다. 또한 황칠나무의 부위별 건조 방법 및 추출 방법에 따른 에센셜 오일과 Caryophyllene의 수율을 각각 구하고 비교하였다. 에센셜 오일의 수율은 껍질 > 잎 > 잔가지 > 큰 가지 순서로 높게 나타났다. 동결 건조한 황칠나무 잎을 초임계 추출하였을 때 에센셜 오일과 Caryophyllene의 수율은 각각 23.2 g/kg DM 및 429.6 mg Caryophyllene/kg DM이었다. 황칠나무의 에센셜 오일은 낮은 농도에서도 항산화 효과가 있었으며, DPPH radical 소거능이 50%를 나타내는 SC50의 에센셜 오일의 농도는 약 0.34%였다.

SBR 가황물에서 용매추출 및 분리에 의한 PCA 오일 Type 확인법 (A New Method to Identify PCA Oil Type through Solvent Extraction and Separation Skills in a SBR Vulcanizate)

  • 김민생;손경숙;이중훈;김익식;최성신
    • Elastomers and Composites
    • /
    • 제47권1호
    • /
    • pp.36-42
    • /
    • 2012
  • 공정오일 내 다핵성 방향족 화합물(PCA)은 무게함량 대비 3%이상 함유한 경우 피부암을 일으키는 것으로 알려졌다. 저함량과 고함량 PCA 오일의 구분 기준은 PCA 함량 3%에 근거한다. 기준 함량 이상이면 발암성 물질인 고함량 PCA 오일로 DAE가 있으며, 기준 함량 이하이면 인체에 안전한 저함량 PCA 오일로 TDAE, MES, 파라핀 오일이 이에 속한다. 상기 4종류의 공정오일을 적용한 SBR 가황물에 용매 추출 및 분리로 오일을 정제한 후, FT-IR분광 기술을 이용하여 PCA 오일 종류을 결정하였다. 그리고 파라핀 오일이 적용된 SBR 가황물에서 고무 약품인 HPPD, TMDQ, 왁스, 공정조제(Structol-40MS)의 오일에 대한 영향을 연구하였다. 분리 정제된 오일로부터 저함량과 고함량 PCA 오일 구분은 방향족 치환체 흡수영역인 파수 864, 810, 754 및 파라핀 또는 나프텐 흡수영역인 파수 721의 상대적인 흡수세기로 확인할 수 있었다.