• The Safety technology
• /
• no.182
• /
• pp.16-18
• /
• 2013

강원도 춘천시에 최근 새로운 변화의 바람이 불고 있다. 우 오수관로를 신설하고 재정비함으로써 하수관거의 기능을 개선하고 하수처리장의 운영효율을 증대시키는 공사가 대대적으로 펼쳐지고 있는 것이다. 2015년 1월, 이 사업이 완료되면 춘천시는 방류 수역 수질개선으로 악취가 저감되고 쾌적한 환경이 조성되는 등 지역주민의 생활환경이 크게 개선되는 효과를 얻을 수 있다. 더불어 효율적인 하수관 유지보수체계도 구축할 수 있게 된다. 사실상 더욱 살기 좋은 춘천시의 등장이 임박한 것이다. 이런 행복한 변화를 만들어내고 있는 주인공은 바로 '코오롱글로벌'이다. '코오롱글로벌 춘천시 하수관거정비 임대형민자사업현장'은 춘천시를 전국 제일의 행복도시로 만들겠다는 신념으로 시공에 임하고 있다. 때문에 공사의 품질을 좌우하는 '안전'에 만전을 기하고 있다. 철저한 안전관리를 통해 춘천을 최고의 주거환경을 갖춘 도시로 변화시키고 있는 이곳 현장을 찾아가 봤다.

• Journal of Korean Society on Water Environment
• /
• v.23 no.4
• /
• pp.458-466
• /
• 2007

This study is to evaluate control effects of separation wall by surveying water quality and sewer overflows during dry and wet periods in combined sewer and separated sewer systems. Ravine water from the combined Seokgyo outfall with the separation wall was separated about four times larger than sewage flow during dry periods. The water quality of the combined Seokgyo outfall with separation wall during dry periods is flow weighed average BOD 61 mg/L, the combined Cheonseokgyo outfall without the separation wall is average BOD 71 mg/L, and the separated Pyeongsong center outfall is average BOD 41 mg/L. The BOD concentration in separated outfall form about 57% of the combined outfall, and this means the separated outfall (i.e. storm sewer) is polluted by inflow of sewage. The overflow load of the separated outfall is ten times higher than the combined outfall and its overflow load per rainfall is three times than combined outfall during the wet periods. Therefore, the control plan of overflow load is required in storm sewer. The control effects of the overflow load increased 79% by setting the separation wall in the combined sewer, and showed 27% increase without the separation wall in separated sewer, but forecasted over 80% increase of effects if the separation wall was set.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2008.05a
• /
• pp.1644-1648
• /
• 2008

해안지역은 해수욕, 어패류의 수집 등의 각종 레크레이션에 있어 많은 사람들이 이용하는 공간이며, 해수는 해안지역에서 각종 활동 중 섭취할 가능성이 있으므로, 수질이 매우 중요하다고 할 수 있다. 이에 본 연구에서는 실제 해수욕장의 수치 모의(수리, 수문, 수질)를 통하여 우수 및 오수가 지표를 통해 해안으로 유입될 경우의 해안지역의 수질에의 영향에 관하여 연구하였다. 지표에서의 우수 유출 및 오수의 흐름을 수치해석은 MOUSE 모델을 사용하였으며 해안지역의 수치해석은 MIKE 3 모델을 사용하였다. 또한 수질 분석을 위하여 미생물의 증감에 영향을 주는 해당 지역의 기온, 수온, 일조량 등의 각종 인자를 구성하여 MIKE 3의 ECOLAB 모듈을 통하여 생물학적 분석을 수행하였다. 그 결과, 해수의 오염이 발생하면, 해수욕이 가능한 기간을 위주로 확인하였을 시, 미생물이 해수에 존재하는 시간은 연간 총 200시간 가량인 것으로 나타났으며, 강우시 해수의 오염이 발생할 시, 강우가 그친 뒤에도 미생물이 완전히 사멸할 때 까지 $4{\sim}6$시간의 정화기간이 필요한 것으로 나타났다. 그리고 첨두 오염 부하량은 비가 그친 직후에 나타나는 것으로 나타났으며 미생물의 해수 유입은 5mm 이상의 강우일 경우에 기준치 이상의 미생물이 발생하며, 해당 지역에 합류식 하수관거가 있을 시에 더욱 많이 발생하는 것으로 나타났다.

• Journal of Korean Society of Water and Wastewater
• /
• v.23 no.6
• /
• pp.779-788
• /
• 2009

This study is the result of a field survey of four sewer networks selected from in domestic sanitary sewers. The main purpose of this study is to understand the characteristics of sediment in domestic sanitary sewers and to verify sewer design criteria using minimum Shear Stess for preventing sedimnet. This investigation was carried out at a total of 22 points in the four areas. The characteristics of the sanitary solids that were sampled for suspended solids and bedload matter showed a specific gravity of 1.09, a median particle size of 1.26mm, and 88.9% organic contents. On the other hand, deposited sediment was found at 6 points out of the 22 monitoring points. The analysis results of disposed sediment showed a specific gravity of 2.16, a median particle size of 1.31mm, and 15% organic contents. In flow velocity, the majority of deposited sites have under 0.6m/s. However, one-site which was in large-diameter collector sewers, has recorded over 0.6m/s. The analysis results of tractive force showed that the ability of tractive force has to be $1.5{\sim}2.0N/m^2$ to prevent sediment in domestic Sanitary sewers. In conclusion, to prevent sediment it is necessary to apply a design velocity criteria higher than 0.6m/s in the large diameter collector sewer.

• Journal of Korean Society of Water and Wastewater
• /
• v.18 no.4
• /
• pp.461-469
• /
• 2004

This research is to determine the stormwater effects on sewer concentrations by measuring and comparing the flow and pollutant concentrations during dry and rainy periods in the existing BOX type combined sewer pipes. The monitoring was carried out in two sites, which are the Daesachen outfall having PE separation wall in BOX type combined sewer pipes and the Yongunchen outfall not having seperatioin wall. The average flow-weighted BOD concentraion in Yongunchen outfall is 2-fold lower than in Daesachen outfall because of the dilution effect from ravine water. However, the pollutant mass loading is 16 fold higher in Yongunchen outfall than in Daesachen outfall because of more flows. According to the research, the separation wall controls 52% pollutant mass during a storm period (11.5 mm/hr rainfall intensity). Therefore, the Yongunchen combined sewer system (CSS) need separation wall to control and to prevent more pollutant input in stream. In Daesachen area, the maximum sewer flow rate during a storm period measured about 10 fold bigger than average sewer flow during dry periods. Also the concentrations between rainy and dry periods increase approximately 33 fold for BOD and 120 fold for SS. In Yongunchen area, it increases about 9 fold for the maximum flow rate, 18 fold for BOD and 22 fold for SS during a storm. Therefore, the research is concluded that the separation wall between stromwater (or ravine water) and sewage can decrease the dilution effect in CSS and control the pollutant loading.

• Journal of Korean Society of Water and Wastewater
• /
• v.19 no.6
• /
• pp.749-757
• /
• 2005

The present study analyzed actual cases of designed flow estimation method and designed flow rate of sewage pipe lines. In order to examine the effects of peak-hour demand factor estimation with given daily highest peak loading, we analyzed its effects on designed flow rate with changing the peak-hour demand factor from 2.0 to 10.0. The results of this study are as follows. When reviewing the recent designs, we found that 59.4% of pipe line with 250mm and 300mm diameter, which fall under minimum allowable pipeline did not meet the minimum velocity which is specified as 0.6m/sec in design standards. The pipe line that have minimal access population or have very low slope did not satisfy the minimum velocity. In estimating the designed sewage flow, the applied daily highest peak loading and hourly highest peaking loading were the load factor for the entire population of the planned area, and for the peak loading of the initial pipes connected to a very small population, we applied the same factor as that applied to the entire area and, as a result, the hourly highest flow was underestimated. Because, in case of the initial pipes, the method of applying the same peak loading to all subject areas is highly possible to produce underestimated design flow, when estimating the designed flow of the initial pipes connected to a small population need to adopt a rational flow factor according to the size of population. For this, it is considered to investigate and analyze raw data on daily and hourly variation of sewage flow.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.36 no.5
• /
• pp.571-577
• /
• 2012

In this study, a small movable batch treatment system for dredging soil deposited in a rain water tube is proposed; further, a vacuum silo sorting separation device with a vacuum silo, first-stage sorting separator, and conveyor is designed. The vacuum silo sorting separation device also consists of a storage tank, transferring screw, vacuum gate, screen bar, screen bar cleaner, and vacuum discharging device. In view of the fact that the flow of drawn air in the storage tank is a major factor influencing the sorting separation performance, the optimum shape of the tank is determined by CFD flow analysis. In addition, by using CAE structure analysis, the safety of a storage tank made of boards is examined. The specifications of the vacuum silo sorting separation device are determined by conducting mechanical and dynamic simulations of the driving mechanism of the vacuum silo sorting separation device through 3D-CAD modeling. Following this study, we will design a drum-screen-type second sorter, a decanter-type dehydration device, and waste water tank and pump as a secondary device. Further, on the basis of this design, we will construct a prototype model and carry out a field test.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2015.05a
• /
• pp.385-385
• /
• 2015

정부는 1998년부터 4대강 물관리종합대책을 세워 하천의 수질보전을 위한 대책을 시행하고 있다. 그 중 대유역 중심의 수질개선대책은 전체적인 큰 목표를 제시하는 것이며, 이러한 대유역의 목표수질을 달성하기 위해서는 먼저 소유역의 수질개선이 이루어져야 한다. 현재 영산강유역에서는 도시하수종말처리장, 산업폐수처리장과 같은 점오염원 관리시설은 대폭 확충되었으나 하천과 호소의 수질은 크게 향상되지 못하고 있다. 이는 중 소유역에 대한 효율적인 수질개선대책이 없기 때문이며, 특히 중 소유역 내 비점오염원 물질이 대량으로 하천 및 호소에 유입되기 때문이다 따라서 효율적인 유역관리를 위해서는 소유역중심의 관리가 필요하며, 소유역 중심의 수질보전 대책을 수립하기 위해서는 대상 소유역에 대한 조사분석이 선행되어야 하는데, 여기에는 관거(우수관, 오수관) 시스템 조사와 하수의 차집조사가 관계되며, 또한 소유역내의 오염원(점오염원과 비점오염원) 및 잠재적인 오염원조사 등과 같은 광범위한 조사 작업이 필요하다. 한편 유역모형 중 HSPF모형은 모형의 적용에 필요한 방대한 자료와 노력을 최소화 되도록 개발되어 왔으며, HSPF는 광범위한 수문 수질과정을 장기 모의가 가능하도록 일련의 구조화된 모듈로 구성되어 있다. 복잡한 모형일수록 자료관리에 많은 노력이 요구되나 HSPF는 자료를 직접적으로 접근할 수 있는 Time Series Management System에 가깝도록 개발되었다. 또한, HSPF 모델은 유역내의 토지이용에 따른 특정 오염물질의 비점오염 부하를 계산하며, 강우에 따른 물의 흐름을 하천의 수질오염모의와 연결시키는데, 광범위한 유역조건에 적용이 가능하고, 각 소유역을 구분하여 비교가 가능하므로 소유역별 관리방안을 비교하는데 가장 적합한 모델이다. 따라서 본 연구는 유역모형(HSPF)을 이용하여 영산강 유역을 대표할 수 있는 중 소유역을 선정하고, 선정된 중 소유역에 대한 기초적인 자료를 조사 분석하여 종합적이고 구체적인 유역 관리계획을 수립해 봄으로써 중 소유역 수질관리에 지침서로서 역할을 하는데 목적이 있다.

• Journal of Korean Society of Water and Wastewater
• /
• v.34 no.3
• /
• pp.211-220
• /
• 2020

When domestic sewage and rainwater runoff are discharged into a single sewer pipe, it is called a "combined sewer system." The sewage design standards in Korea specify the flow velocity based only on the volume of rainfall; therefore, sedimentation occurs on non-rainy days owing to the reduced flow rate and velocity. This sedimentation reduces the discharge capacity, causes unpleasant odors, and exacerbates the problem of combined sewer overflow concentration. To address this problem, the amount of sewage on non-rainy days, not just the volume of rainfall, should also be considered. There are various theories on sedimentation in sewer movement. This study introduces a self-cleansing velocity based on tractive force theory. By applying a self-cleansing velocity equivalent to the critical shear stress of a sand particle, sedimentation can be reduced on non-rainy days. The amount of sewage changes according to the water use pattern of citizens. The design hourly maximum wastewater flow was considered as a representative value, and the velocity of this flow should be more than the self-cleansing velocity. This design method requires a steeper gradient than existing design criteria. Therefore, the existing sewer pipelines need to be improved and repaired accordingly. In this study, five types of improvement and repair methods that can maximize the use of existing pipelines and minimize the depth of excavation are proposed. The key technologies utilized are trenchless sewer rehabilitation and complex cross-section pipes. Trenchless sewer rehabilitation is a popular sewage repair method. However, it is complex because the cross-section pipes do not have a universal design and require continuous research and development. In an old metropolis with a combined sewer system, it is difficult to carry out excavation work; hence, the methods presented in this study may be useful in the future.