• Journal of the Korean Applied Science and Technology
• /
• v.36 no.2
• /
• pp.448-455
• /
• 2019

This study aims to discover whether there are other factors, such as the ball position and address that will increase the percentage of holed putts from different angles of surface. In this study, we selected five male tour professional golfers that has been of 15 years or longer on the Korea Golf Association. As a research tool, after installing a video camera at an artificial site that's similar with the real green, and with the player's own putter, motion analysis was carried out using a Titleist V1x, which is commonly used by golfers. We use SPSS programs, significance level a=.05. According to the ball movement during the ball movement during the ball position putt by section, it is confirmed that the ball speed and angular velocity increase as the ball position changes from left to right. If the uphill putt, ball movement was found to be increased same change flat putt and There is no significance deviation. In this study, we investigate how the clubface and ball move during impact by varying the position of the address ball according to the slope during the ascent putt, which should increase the success rate among the various slopes. This study was conducted to present scientific data.

• Journal of Korean Society of Transportation
• /
• v.19 no.6
• /
• pp.119-129
• /
• 2001

본 연구는 국내의 화물차(이하 트럭) 특성, 도로 조건과 주행 저항이 고려된 트럭 성능 곡선 산출식의 매개변수를 추정하기 위하여 수행되었다. 이를 위해 국내 대표트럭을 선정하고 경사지 진입속도를 산출하였다. 국내 대표트럭의 선정은 자동차 등록현황 자료를 토대로 하여 트럭 중량/마력비에 대한 누적 분포를 작성하고 이 중에서 주요 차종(적재 중량 11톤 이상)의 총중량은 과적 검문소 자료로 보정하여 이루어졌다. 경사지 진입속도는 도별 평지부 직선 구간을 한 곳씩 선정하여 4차로도로와 2차로도로에서 수집되는 자료를 분석하여 산출하였다. 트럭 성능 곡선 산출식을 정립하기 위해 오르막 한계속도$(V_x)$ 산출식을 정리한 뒤 총중량(W), 엔진성능(P), 경사도(G)는 독려 변수로 k, $f_{rc}$, $f_{rv}$, $\Phi$는 매개변수로 설정하였다. 현장조사를 통해서 오르막 한계속도에 도달한 트럭의 총중량과 엔진성능, 속도, 경사도 등의 자료를 수집하여 매개변수 산출에 이용하였다. 마지막으로 추정된 매개변수를 이용하여 트럭 성능 곡선을 도출하였다.

• International Journal of Highway Engineering
• /
• v.12 no.4
• /
• pp.17-28
• /
• 2010

A climbing lane is installed to separate low-speed traffic from high-speed traffic if drastic traffic capacity reduction is expected due to a large number of vehicles that slow down in the upward section. Existing studies on climbing lanes have focused on the designation, location of starting and ending points, and installation method of climbing lane with regard to road design standards. However, in terms of traffic operation, it was known that the climbing lanes cause traffic congestion due to the increase of traffic volumes. In this regard, this study aims to establish traffic operational guidance as to how much effects temporary closure of climbing lanes can have on traffic improvement according to the volume-capacity ratio, grade, and composition of trucks. A test section of simulated climbing lane was selected in Nakdong JC bound for Masan(136.9K~133.3K, 3.6km, 3.7%) on Jungbunaeryuk expressway to conduct VISSIM analyses, microscopic traffic simulation based on such control variables as traffic volume(v/c), grade and the trucks ratio. As a result of the analyses, it has been found that v/c and the ratio of trucks are the key variables for efficient traffic management of climbing lanes in order to relieve traffic congestion via climbing lane. If ratio of trucks are more than 50% and when v/c would be 0.8, both climbing lane would be closed and non-operated regardless of grade and ratio of trucks when v/c is 1.0. With the increased traffic due to a five-day work week system, continued peak hours during the weekday, increased and various patterns of congestion on expressway, this study would be expected to contribute to facilitating researches on flexible operational standards for road facilities.

• The Journal of the Acoustical Society of Korea
• /
• v.27 no.1
• /
• pp.47-56
• /
• 2008

In the detection of an underwater target, there exists an optimal search depth for the sonar systems, at which the Probability of Detection is maximized. The optimal search depth is dependent on the depths of the target and sonar, the sound speed profile, and the bathymetry. In this paper, we address this question in range-dependent environments, particularly for the bathymetry with slope and with warm eddy. For range-dependent bathymetry, the typical sound profile in the East Sea of Korea was used. The detection range was greater when the sonar was located in deep water than in shallow water. As for the case of eddy, mesoscale warm eddy was used, and the detection range was greater when looking out of the warm eddy than when looking into the eddy.

• Journal of Korean Society of Transportation
• /
• v.32 no.5
• /
• pp.473-486
• /
• 2014

This study aims to review whether climbing lane installment is needed by analyzing the impact that standard trucks have on traffic according to vertical alignment at SMART highway, and if climbing lanes are required to propose truck speed change curves based on slope length. We used VISSIM simulation model to obtain the speed change of the standard truck on uphill roads. The standard truck on climbing lanes was set for 100kg/kW (170lb/hp) with the entry speeds set and analyzed by 90, 100, and 110 km/h considering the future speed limit of trucks. The results of the research show that under SMART highway circumstance, the 1 and 2% vertical alignment is not needed at the climbing lane but 3% vertical alignment is necessary. In order to install the climbing lane at 3% vertical alignment, the speed change curve of truck depending on slope length of 90, 100, and 110km/h of entry speed is proposed.

• Korean Journal of Applied Biomechanics
• /
• v.19 no.2
• /
• pp.297-309
• /
• 2009

The study analyzed the mechanism of plantar foot pressure distribution during pitching wedge swinging on a flat, an up hill lie and a down hill lie to provide the fundamental information regarding biomechanical motion data by using plantar foot pressure measuring instrument. In the results, time factor spanning according to slope differences, plantar foot pressure factor and swing motion on the slope could have negative effect on the coiling of lower limbs during back swing, as well as the blocking of the lower limbs to minimize the dispersion of the weight and the release of the lower limbs after the impact during the down swing process. Moreover, since slope is one of many external factors affecting swing motion, address motion on an up hill lie limits the lower limbs movement, therefore, a relatively narrow stance is better on a down hill lie. It is estimated that a relatively wide stance would be better in order to limit the bigger activation of the lower limbs. Not only for the address motion but also during the down swing on an up hill lie it is concluded that the weight should be on the left foot in order to keep the body balance.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.14 no.1
• /
• pp.77-84
• /
• 2015

In 2011, greenhouse gas emissions of transport sector were 85.04 million $tonCO_2eq$ and road emissions accounted for 95% of total emissions in the transport sector. There are few innovative technologies to reduce greenhouse gas emissions aside from eco-driving education and public relation program. Therefore, this paper focused on analyzing optimal acceleration by certain road grades and suggested fuel-efficient driving method for various uphill sections. Scenarios were established by driving modes. Speed profiles were generated by scenarios and speed variations. Each speed profile applied to Comprehensive Modal Emission Model and then each fuel consumption was estimated. Driving mode and speed variation that minimized fuel consumption were driven according to grade percent and uphill distance. When driving in the eco-friendly mode of the driving and speed variation, reduction rate of fuel consumption was evaluated by comparison between eco-driving and cruise control mode. When a vehicle drove under eco-driving mode at 100kph, 90kph and 80kph on uphill road, fuel consumptions were reduced by 33.9%, 30.8% and 5.3%, respectively.

• Korean Journal of Applied Biomechanics
• /
• v.19 no.3
• /
• pp.529-538
• /
• 2009

The purpose of this study was to investigate correlation between BBS(Berg balance scale), SPPB(short physical performance battery,) TUG(timed up and go) and COP(center of pressure) during quiet standing in elderly women. Ten elderly women aged 65 to 75 years participated in this study. Subjects were measured physical functional test and they were stood in quiet stance on force platform positioned in one of three different fixed positions(flat, downward, upward). The COP range and mean velocity data were calculated using an experimental setup with the ground reaction force system. COP range and mean velocity of AP direction showed significant more expanded than ML direction of all slope types. Physical performance scores were significant correlated between COP range and mean velocity according to surface slopes. After all elderly women get high score of physical performance that brought decreased on one's COP range and mean velocity. This study suggests that clinical therapist have application to COP parameters as well as BBS, SPPB, TUG of balance assessment in elderly women.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.13 no.4
• /
• pp.48-56
• /
• 2014

Even though vehicle types, gradient, pavement conditions and types of pavement should be considered for estimating fuel consumption, existing models were developed as a function of vehicle types and vehicle speed. Therefore in this study, the model of fuel consumption was developed using field test data in order that effect analysis on the passenger vehicle fuel consumption by road gradient. At first, fuel consumption was measured in second-based, using GPS device and fuel consumption measurement device for development of fuel consumption model considered road gradient. The road gradient was classified as flatland, up-hill and down-hill. Development of model was using by regression model which vehicle speed(km/h) and fuel consumption(${\ell}/km$). The on-road test proved that fuel consumption of passenger vehicle is affected by road gradient.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2006.10a
• /
• pp.549-550
• /
• 2006