• 한국항공우주학회지
• /
• 제34권7호
• /
• pp.79-88
• /
• 2006

본 논문에서는 대와동모사를 이용하여 모형 가스터빈 연소기에서 난류 예혼합연소의 선회 유동구조와 화염특성이 검토되었다. 비정상 화염 거동을 모사하기 위하여 G-방정식 화염편 모델이 적용되었다. 결과로서, 입구 선회수 증가에 따른 코너 및 중앙 재순환 유동이 뚜렷한 차이를 보이며, 화염의 길이도 점차 감소됨을 확인 할 수 있었다. 또한 강선회 조건에서 역화현상의 원인이 확인되었다. 정확한 비정상 화염거동의 모사를 위하여, 연소실 내 음향파 거동의 예측성능이 우선적으로 검토되었으며, 스텝 모서리 근처에서 생성된 와동이 화염면 변동에 가장 큰 영향을 주고 있음을 알 수 있었다. 마지막으로 비정상 화염-와동 상호작용에 대한 해석을 통해 선회와 음향파의 전개로부터 생성된 와동의 진동이 화염면 및 열발생의 변동과 밀접하게 관련되어짐을 체계적으로 규명하였다.

• 대한기계학회논문집
• /
• 제14권6호
• /
• pp.1661-1668
• /
• 1990

본 연구에서는 코히런트 와(渦)에 지배되는 난류 예혼합화염의 미세구조를 밝 히기 위해 슐리이렌사진과 온도, 이온전류의 3가지를 동시에 측정하고, 그 변동량을 통계처리, 분석하여, 미시적인 화염구조 모델을 제시하고자 한다.

• 한국가시화정보학회지
• /
• 제11권1호
• /
• pp.22-27
• /
• 2013

An investigation into the influence of ultrasonic standing wave on the structural behavior of propane/air premixed flame has been made to get a clue to the combustion reaction acceleration and combustion instability. Visualization technique utilizing the Schlieren photography was employed for the observation of structural variation of the flame reaction zone. Evolutionary characteristics of the flame front were caught by the high-speed Schlieren image, through which local flame velocity of the moving front were analyzed in detail.

• 한국연소학회지
• /
• 제8권2호
• /
• pp.1-6
• /
• 2003

Numerical simulations are conducted at atmospheric pressure in order to understand the effect of the oxygen enrichment level on structure of $CH_4/O_2/N_2$ premixed flames. Under several equivalence ratios the flame speeds are calculated and compared with those obtained from the experiments, the results of which are in good agreement. The effects of the oxygen enrichment are investigated on flames under fuel-rich conditions. As the oxygen enrichment level is increased from 0.21 to 1, the flame speed and the temperature are increased. The emission index of $CO_2$ is decreased in cases of flames for fuel rich mixtures, so the efficiency of combustion may be decreased. The maximum emission index of NO is obtained for 0.6 of the oxygen enrichment level.

• 대한기계학회논문집
• /
• 제19권6호
• /
• pp.1510-1517
• /
• 1995

A theoretical method is described to simulate the propagation of turbulent premixed flames in a closed vessel. The objective is to develop and test an efficient technique to predict the propagation speed of flame as well as the geometric structure of the flame surfaces. Flame is advected by the statistically generated turbulent flow field and propagates as a wave by solving twodimensional Hamilton-Jacobi equation. In the simulation of the unburned gas flow field, following turbulence properties were satisfied: mean velocity field, turbulence intensities, spatial and temporal correlations of velocity fluctuations. It is assumed that these properties are not affected by the expansion of the burned gas region. Predictions were compared with existing experimental data for flames propagating in a closed vessel charged with hydrogen/air mixture with various turbulence intensities and Reynolds numbers. Comparisons were made in flame radius growth rate, rms flame radius fluctuations, and average perimeter and fractal dimensions of the flame boundaries. Two dimensional time dependent simulation resulted in correct trends of the measured flame data. The reasonable behavior and high efficiency proves the usefulness of this method in difficult problems of flame propagation such as in internal combustion engines.

• 대한기계학회논문집
• /
• 제11권6호
• /
• pp.991-1000
• /
• 1987

본 연구에서는 과농-희박 연료장에서 화염들의 상호작용에 관하여 이론적 해 석 및 실험적 검증을 통해 연구하였고, 이 중 특히 두 개의 예혼합화염 사이에 확산화 염이 형성되어 세 개의 화염이 존재하는 영역을 고찰하였다.

• 대한기계학회논문집B
• /
• 제29권1호
• /
• pp.71-79
• /
• 2005

For the non-premixed interacting jet flames, it has been reported that if eight small nozzles are arranged along the circle of $40{\sim}72$ times the diameter of single jet, the flames are not extinguished even in 200m/s. In this research, experiments were extended to the partially premixed cases to reduce both flame temperature and NOx emission. Nine nozzles were used- eight was evenly located along the perimeter of the imaginary circle and one at the geometric centre. The space between nozzles, S, the equivalence ratio, ${\phi}$, the exit velocity and the role of the jet from the centre nozzle were considered. Normally, flame was lifted and flame base was located inside the imaginary circle made by the nozzle. As nozzles went away from each other, blowout velocity increased and then decreased. The maximum blowout velocity diminished with the addition of air to the fuel stream. When the fuel and/or oxidizer were not fed through the centre nozzle, the maximum blowout velocity obtained by varying S and ${\phi}$ was around 160m/s. Optimum nozzle separation distance at which peak blowout velocity obtained also decreased with ${\phi}$ decrease. Flame base became leaner as approaching to the blowout. It seemed that lots of air was supplied to the flame stabilizing region by the entrainment and partially premixing. To approve this idea and to enhance the blowout velocity, fuel was supplied to the centre region. With the small amount of fuel through the centre nozzle, partially premixed flame could be sustained till sonic velocities. It seemed that the stabilizing mechanism in partially premixed interacting flame was different from that of non-premixed case because one was stabilized by the fuel supply through the centre nozzle but the other destabilized.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2004년도 제29회 KOSCI SYMPOSIUM 논문집
• /
• pp.85-90
• /
• 2004

We have presented characteristics of a transitional behavior from a premixed flame to a triple flame in a lifted flame according to the change of equivalence ratio. The experimental apparatus consisted of a slot burner and a contraction nozzle for a lifted flame. As concentration difference of the both side of slot burner increases, the shape of flame changed from a premixed flame to a triple flame, and the liftoff height is decreased to the minimum value and then increase again. Around this minimum point, it is confirmed a transition regime from premixed flame to triple flame. Consequently, the experimental results of the liftoff height, flame curvature and luminescence intensity showed that the stabilized laminar lifted flame regime is categorized by regimes of premixed flame, triple flame and critical flame. In the visualization experiment of smoke wire, the flow divergence and redirection reappeared in premixed flame as well as triple flame. Thus we cannot express the flame front of lifted flame has a behavior of triple flame with only flow divergence and redirection. To differentiate triple flame and premixed flame, ${\Phi}$ value of partially premixed fraction is employed. The partially premixed fraction ${\Phi}$ was constant in premixed flame. In critical flame small gradient appears over the whole regime. In triple flame, typical diffusion flame shape is obtained as parabolic distribution type due to diffusion flame trailing.

• 대한기계학회논문집B
• /
• 제34권2호
• /
• pp.197-202
• /
• 2010

자발 진동하는 층류 예혼합 분젠 화염을 관찰하기 위하여 분기관을 가진 연소기를 제작 하였다. 특히, 조건에 따른 화염 거동을 살펴봤으며, 화염 표면적과 열발생 변동의 관계에 대하여 고찰하였다. 본 연구에서 사용된 당량비는 1.1 이고, 노즐 출구 평균 유속은 1.75 m/sec 이다. 연소 챔버와 분기관의 길이비(L.R.)는 연소기 내 압력 변동에 영향을 미치며, 결과적으로 화염 거동 특성이 달라짐을 관찰하였다. 또한, 간섭 필터의 유무에 따른 $OH^*$, $CH^*$, 그리고 화염 자발광은 정성적으로 유사한 거동을 나타냈으며, 자발 진동하는 층류 예혼합 분젠 화염의 화염 표면적 변동과 열발생 변동은 선형적인 관계를 가짐을 확인하였다.

• 대한기계학회논문집B
• /
• 제36권6호
• /
• pp.647-653
• /
• 2012

에러 최소 연결 방법(SEM-CM) 및 반복적 화학종 제거 민감도를 적용한 반응 메카니즘 감소 방법을 갖고, 고압에서 메탄-공기 예혼합 화염에 대한 축소 반응 메카니즘을 개발하였다. 최대 5% 이내의 에러 조건에서 얻어진 축소 반응 매카니즘은 43개 화학종과 554개 기초반응식으로 구성되어 있다. 고압조건에서 다양한 초기온도, 당량비를 갖는 메탄-공기 화염에 대하여 상세 화학반응 메카니즘과 축소 반응 메카니즘으로부터 얻어진 화염구조는 비교되었고, 결과는 잘 일치하였다. 따라서 개발된 축소 반응 메카니즘은 고압에서 화염속도, 화염온도, 주 화학종 및 부 화학종의 농도 등을 재생할 수 있다.