• Korean Chemical Engineering Research
• /
• v.52 no.5
• /
• pp.592-602
• /
• 2014

In the Integrated Gasification Combined Cycle (IGCC), the stability of the gasifier has strong influences on the rest of the plant as it supplies the feed to the rest of the power generation system. In order to ensure a safe and stable operation of the entrained-flow gasifier and for protection of the gasifier wall from the high internal temperature, the solid slag layer thickness should be regulated tightly but its control is hampered by the lack of on-line measurement for it. In this study, a previously published dynamic simulation model of a Shell-type gasifier is reproduced and two different linear model predictive control strategies are simulated and compared for multivariable control of the entrained-flow gasifier. The first approach is to control a measured secondary variable as a surrogate to the unmeasured slag thickness. The control results of this approach depended strongly on the unmeasured disturbance type. In other words, the slag thickness could not be controlled tightly for a certain type of unmeasured disturbance. The second approach is to estimate the unmeasured slag thickness through the Kalman filter and to use the estimate to predict and control the slag thickness directly. Using the second approach, the slag thickness could be controlled well regardless of the type of unmeasured disturbances.

• Journal of Korean Society of Transportation
• /
• v.22 no.4 s.75
• /
• pp.107-116
• /
• 2004

VMS를 통한 정보제공에는 과도반응과 통행집중의 위험부담이 따른다. 즉 대안경로간에 이루어져야 할 통행배분을 정확히 유도할 수 있는 VMS 메시지란 존재치 않는다. VMS 메시지에 의해 특정 경로가 교통상황이 타 경로에 비해 좋다고 정보가 주어질 때, 그 정보에 대한 과도반응과 그 특정경로에 대한 통행집중 문제가 발생하여 정보제공에 의해 오히려 상황이 악화될 수 있다. 본 연구에서는 대안경로간의 물리적 특성 측면에서 우열이 있는 가상 네트워크를 대상으로 하여, 과도반응과 통행집중 문제를 극복하고 대안경로간의 적절한 통행배분을 달성하기 위한 VMS 운영알고리즘을 개발하는 것을 목표로 한다. VMS정보제공 결과, 즉 VMS를 통해 상황이 좋다고 알려준 경로에 통행이 집중할 경우 문제가 될 것인가 여부를 미리 예측해 보고, 문제가 될 경우 정보제공 전략을 수정하도록 하는, 피드백 제어에 예측적 방식을 접목하였다. 본 연구에서 제안한 알고리즘의 주요 기능은 다음과 같다. 1. 교통량, 속도 등에 대한 실시간 모니터링 시스템이 구축되어 있음을 전제로 한다. 2. 실시간 제어에는 모니터링 결과와 이에 근거한 정보제공전략의 시행사이에는 시간차가 존재한다. 이러한 시간차이로 인하여 단기예측이 필요하고, 이를 수행하는 모듈이 있다. 3. 정보제공 결과로 특정 경로에 과부하가 걸리는지 여부를 예측하기 위하여, 그 판단기준으로 그 경로의 실제 용량 산정이 필요하다. 이에 혼잡의 시공간적 전개에 따라 변하는 동적 용량을 산정하는 모듈이 있다. 4. 대안 경로간 통행배분 목표치를 수리적으로 산정할 수는 있으나, 이를 자동적으로 이루어 주는 메시지는 존재하지 않는다. 아울러 현실적으로 예측 불가능한 외란을 모형에 의존하여 예측하기 보다는, 계속적인 피드백 레귤레이터(Regulator) 작동에 의해 보정하여 목표를 달성해 가는 자동제어 기능을 갖고 있다.

• Journal of Ocean Engineering and Technology
• /
• v.14 no.4
• /
• pp.35-42
• /
• 2000

The sway control problem of the pendulum motion of a container hanging on the trolly, which transports containers from a container ship to trucks, is considered in the paper. In the container crane control problem, suppressing the residual swing motion of the container at the end of acceleration or the case of that the unexpected disturbance input exists is main issue. For this problem, in general, the trolley motion control strategy is introduced and applied. But in this paper, we introduce and synthesize a new type of swing motion control system. In this control system, a small auxiliary mass is installed on the spreader. And the actuator reacts against the auxiliary mass, applying intertial control forces to the container to reduce the swing motion in the desired manner. In this paper, we apply the LMI approach and simultaneous optimization design method to design the anti-swing motion control system for the controlled plant. And the simulation result shows that the proposed control strategy is shown to be robust to disturbances like winds and initial sway motion.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.33 no.2
• /
• pp.84-91
• /
• 2005

For long time, the takeoff and landing control of airship was worked by human handling. With the development of the autonomous control system, the exact controls during the takeoff and landing were required and lots of methods and algorithms were suggested. This paper presents the result of airship take-off and landing by buoyancy control using air ballonet volume change and performance control of pitch angle for stable flight within the desired altitude. For the complexity of airship's dynamics, firstly, simple PID controller was applied. Due to the various atmospheric conditions, this controller didn't give satisfactory results. Therefore, new control method was designed to reduce rapidly the error between designed trajectory and actual trajectory by learning algorithm using an artificial neural network. Generally, ANN has various weaknesses such as large training time, selection of neuron and hidden layer numbers required to deal with complex problem. To overcome these drawbacks, in this paper, the RBFN (radial basis function network) controller developed. The weight value of RBFN is acquired by learning which to reduce the error between desired input output through and airship dynamics to impress the disturbance. As a result of simulation, the controller using the RBFN is superior to PID controller which maximum error is 15M.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.5 no.5
• /
• pp.419-426
• /
• 2000

Generally diode rectifier has been used as Preregulator of arc- welding machine. Its defect is the generation of high current harmonics which result In utility pollution. In this parer, using the three-phase PWM converter, the input performance of arc-welding machine is improved by increasing the input power factor. When the diode rectifier in the arc-welding machine is replaced with three-phase PWM converter, PWM converter should control DC voltage of the output side. If PI controller is used for the output DC voltage regulator, the output DC voltage has high ripple voltage due to the instantaneous load variation in the arc-welding machine. In this paper, the feedforward compensator has been introduced to reduce the DC voltage ripple. It lessens the influence of load current which is the disturbance of the output DC voltage regulator. Theoretical prediction of this analysis has been verified by comparing with experimental data

• Journal of the Korean Institute of Intelligent Systems
• /
• v.21 no.6
• /
• pp.737-742
• /
• 2011

Navigation problems include the task of determining the control input under various constraints for systems such as mobile robots subject to uncertain disturbance. Such tasks can be modeled as constrained stochastic control problems. In order to solve these control problems, one may try to utilize the dynamic programming(DP) methods which rely on the concept of optimal value function. However, in most real-world problems, this trial would give us many difficulties; for examples, the exact system model may not be known; the computation of the optimal control policy may be impossible; and/or a huge amount of computing resource may be in need. As a strategy to overcome the difficulties of DP, one can utilize ADP(approximate dynamic programming) methods, which find suboptimal control policies resorting to approximate value functions. In this paper, we apply recently proposed ADP methods to a class of navigation problems having complex constraints, and observe the resultant performance characteristics.