• The Journal of the Acoustical Society of Korea
• /
• v.23 no.1
• /
• pp.54-60
• /
• 2004

In order to mitigate the problems in storage space and network bandwidth for the full CD quality audio, current digital audio is always restricted by sampling rate and bandwidth. This restriction normally results in low sample rate audio or calls for the data compression scheme such as MP3. However, they can only reproduce a lower frequency range than a regular CD quality because of the Nyquist sampling theory. Consequently they lose rich spatial information embedded in high frequency. The propose of this paper is to propose efficient high frequency enhancement of low sample rate audio using n adaptive filtering and DWT analysis and synthesis. The proposed algorithm uses the LMS adaptive algorithm to estimate the missing high frequency contents in DWT domain and it then reconstructs the spectrally enhanced audio by using the DWT synthesis procedure. Several experiments with real speech and audio are performed and compared with other algorithm. From the experimental results of spectrogram and sonic test, we confirm that the proposed algorithm outperforms the other algorithm and reasonably works well for the most of audio cases.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2023.05a
• /
• pp.79-80
• /
• 2023

본 연구에서는 자율운항선박이 복잡한 항계 내에서 다양한 해상 객체와의 충돌을 회피하기 위하여 계층적 경로 생성 기법을 연계하는 프레임워크를 제안한다. 항계 내에는 항로를 항행하는 선박 외에도 정박 영역 내 정박 또는 묘박 중인 선박뿐만 아니라 항로 표지나 부표와 같은 정적 객체들이 다양하게 분포되어 있다. 자율운항선박의 효율적 운항을 위해서는 운항 중에 조우하게 되는 객체의 정적/동적 속성에 따라 경로 생성 기법이 달리 적용되어야 한다. 본 연구에서 제안한 경로 생성 프레임워크는 항계 내의 정적 객체나 항행 가항 영역 및 항행 불가항 영역 등에 대한 위치 정보들은 사전적 정보로 활용 가능하므로, 샘플링 기반의 전역 경로 생성 기법을 적용하여, 초기 출발지에서 최종 목적지까지의 예상 경로를 생성한다. 그리고 생성된 전역 경로를 추종하며 운항하는 과정에서 조우하게 되는 동적 객체들과의 조우 상황별 국제해상 충돌예방규칙(COLREGs)을 고려한 지역 경로를 생성한다. 샘플링 기반의 전역 경로와 국소 영역에서의 충돌 회피를 위한 지역 경로를 연계하기 위한 계층적 경로 생성 프레임워크를 설계하고, 수치 시뮬레이션을 통해 제안한 프레임워크의 유용성을 검증하였다.

• Journal of Broadcast Engineering
• /
• v.14 no.3
• /
• pp.357-365
• /
• 2009

In an OFDM system, the sampling frequency offset between the transmitter and receiver is known to cause the inter-channel interference (ICI), resulting in performance degradation. Sampling frequency offset can be generally estimated by correlation of the pilot signal within contiguous OFDM symbol. In this paper, we propose sampling frequency offset estimation schemes using various mixture of consecutive symbols. We conduct a simulation in DVB-T(2K mode) system, which shows that the proposed schemes can improve the performance of sampling frequency offset estimation by decreasing noise effect within consecutive symbols in AWGN channel model.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.13 no.4
• /
• pp.67-76
• /
• 2009

Recently, the active interaction control (AIC) system was proposed as a semi-active control system. The AIC system consists of a primary structure and an auxiliary structure. The objective of the AIC system is to control the response of the primary structure through engagement and disengagement between the primary and auxiliary structures. Previous switching control algorithms have been shown to be effective in reducing the response of the primary structure. However, they have the main drawback of requiring an excessive engagement-disengagement frequency and high interaction force. In this paper, the regions in which the switching is activated and the regions in which the switching is deactivated are described separately, to effectively determine the engagement or the disengagement. The general relationship between the switching regions and the deactivated switching regions selected according to the engagement-disengagement conditions is described within the newly-developed comprehensive switching framework. The proposed engagement-disengagement conditions are designed within a comprehensive switching framework, to reduce engagement-disengagement frequency and interaction force. Furthermore, the effect of a control sampling period on the AIC system is explained in terms of the engagement-disengagement frequency. The effectiveness of the proposed algorithms and the effect of the control sampling period are considered for a single degree of freedom model under free vibration. It is observed that increasing the duration of stay by using a large control sampling period prevents the AIC system from activating the possible chance of switching. The proposed algorithms are shown to be effective, both in restricting ineffective switching and in reducing interaction force.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2014.06a
• /
• pp.101-104
• /
• 2014

3차원 영상 제작을 위해서는 장면의 색상 영상과 함께 깊이 정보가 필요하다. 일반적으로 깊이를 측정하는 TOF 카메라에 의해 획득된 깊이 영상은 컬러 영상에 비해 매우 작은 해상도의 영상을 갖게 되는 문제가 있다. 따라서 색상 영상과 함께 3차원 영상 제작에 깊이 영상을 사용하기 위해서는 저해상도 깊이 영상의 업샘플링 방법이 필요하다. 특히 컬러 영상에서 사물 간의 경계에 해당하는 부분에서 색상 차이를 인지하지 못하여 깊이 맵을 부적절하게 처리하게 되는 경우가 발생한다. 본 논문에서는 색상 영상에서 경계부분에 해당하는 영역을 이용하여 저해상도 깊이 영상을 업샘플링 하는 방법을 제안한다. 깊이 영상을 업샘플링 할 때 중요하게 다루어야 할 경계 부분을, 고해상도 색상 영상과 저해상도 깊이 영상을 이용하여 찾아낸다. 색상 경계 부분을 고려하여 깊이 영상 업샘플링을 위한 에너지 함수를 MRF를 이용하여 모델링하고, 신뢰 확산(belief propagation)방법을 이용하여 에너지 함수 최적화를 수행한다. 제안한 방법은 기존의 다른 에너지 함수나 필터 기반 업샘플링 방법보다 우수한 성능을 나타내었다.

• Journal of the Institute of Convergence Signal Processing
• /
• v.12 no.4
• /
• pp.242-249
• /
• 2011

In this paper, the correspondence matching method of stereo images was proposed by means of sampling projective transformation matrix in planar region of scene. Though this study is based on RANSAC, it does not use uniform distribution by random sampling in RANSAC, but use multi non-uniform computed from difference in positions of feature point of image or templates matching. The existing matching method sampled that the correspondence is presumed to correct by use of the condition which the correct correspondence is almost satisfying, and applied RANSAC by matching the correspondence into one to one, but by sampling in stages in multi probability distribution computed for image in the proposed method, the correct correspondence of high probability can be sampled among multi correspondence candidates effectively. In the result, we could obtain many correct correspondence and verify effectiveness of the proposed method in the simulation and experiment of real images.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.41 no.5
• /
• pp.117-124
• /
• 2004

Various multimedia systems have been developed and their application areas widely proliferate. Thus, the interoperability is getting important among various networks and devices. The video transcoding is a technology to solve this interoperability problem among various coding standards. Transcoding can be defined as the conversion of one compressed coded data to another. In this paper, MPEG-2 to MPEG-4 transcoder in the spatial domain is compared with that in the DCT domain. The transcoder is very useful when a video sequence that is originally encoded for digital TV, DVD or satellite broadcasting is served in mobile environment. In order to compare two transcoders, all modules except motion compensation and down sampling are implemented identically. In addition, both transcoders do not search for motion vector. Instead, the decoded information is reused to the encoder. The experimental results show that the transcoder in the spatial domain is usually better than that in the DCT domain with respect to PSNR (Peak Signal-to-Noise Ratio), bitrate and execution time.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.11A
• /
• pp.1004-1011
• /
• 2005

In OFDM (Orthogonal Frequency Division Multiplexing) system, sampling frequency offset causes performance degradation due to increase of ICI. Sampling frequency offset can be generally estimated by correlation of the pilot signal or the known pattern within two contiguous OFDM symbol however, this method has the throughput degradation and the difficulty in applying to various OFDM systems. In this paper, we propose a new algorithm for sampling frequency offset estimation which can solve aforementioned issues. The proposed algorithm uses a single OFDM symbol to prevent throughput degradation and to apply to various OFDM-based communication systems flexibly Also, the proposed algorithm can enhance reliability by observing more number of correlations compared to the established algorithm in frequency domain. Extensive computer simulation shows that the proposed algorithm can improve the system performance in various channel conditions.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.12C
• /
• pp.1249-1256
• /
• 2006

This paper proposes, based on a bandpass sampling theory, a novel method to find valid sampling frequency range and minimum sampling rate with low computational complexity for downconversion of multiple bandpass radio frequency (RF) signals. Guard-bands or spacing between adjacent downconverted signal spectrums are also taken into consideration in determining sampling frequency for practical implementation. Moreover, we verify through comparison with other method that the proposed method has more advantageous properties.

• Journal of Digital Contents Society
• /
• v.15 no.3
• /
• pp.347-355
• /
• 2014

The general octree structure is common for various applications including computer graphics, geometry information analysis and query. Unfortunately, the general octree approach causes duplicated sample data and discrepancy between sampling and representation positions when applied to sample continuous spatial information, for example, signed distance fields. To address these issues, some researchers introduced the dual octree. In this paper, the weakness of the dual octree approach will be illustrated by focusing on the fact that the dual octree cannot access some specific continuous zones asymptotically. This paper shows that the primal tree presented by Lefebvre and Hoppe can solve all the problems above. Also, this paper presents a three-dimensional primal tree traversal algorithm based the Morton codes which will help to parallelize the primal tree method.