• Korean Journal of Food Science and Technology
• /
• v.26 no.4
• /
• pp.448-452
• /
• 1994

This paper presents a computer image processing system, which measures the thickness of the food extrudate on a real-time basis. The image processing system was established with a CCD camera, an image grabber, and a 486 PC. The image obtained by the system was analyzed by a devised C-program, specially designed for the real-time thickness measurement of the extrudate. Experimental results showed that the proposed computer algorithm yielded an accurate measurement of the thickness of the food extrudate within 1 second.

• Korean Journal of Food Science and Technology
• /
• v.38 no.3
• /
• pp.361-368
• /
• 2006

Extruded ginseng was manufactured using twin-screw extruder under 300 rpm screw speed, 21 kg/hr feed rate, $80-150^{\circ}C$ extrusion temperature, and by addition of water (12.1-30.6%). Extraction yield and contents of total carbohydrate and uronic acid in extruded ginseng at room temperature extraction (RT) increased with increasing extrusion temperature, whereas those of boiling temperature extracts (BT) were not affected by increasing extrusion temperature. Contents of nonstarch polysaccharide (NSP) in RT and BT extracts increased 340 and 142%, respectively, compared to that of raw ginseng. Main sugar compositions of NSP in RT and BT extracts were arabinose, galactose, and glucose. Extraction yields of total and crude saponins in extruded ginseng at optimize extrusion condition were higher than that of raw ginseng. In RT extracts, molecular weights of polysaccharides from raw were higher than that of extruded ginseng polymer, whereas in BT extracts molecular weights of polysaccharides from extruded ginseng were higher than those of raw ginseng polysaccharides.

• The Transactions of the Korea Information Processing Society
• /
• v.5 no.4
• /
• pp.1057-1065
• /
• 1998

This paper describes a new fractal image coding algorithm to shorten time to take on fractal image encoding by using limited search area method and scaling method. First, the original image is contracted respectively by half and by quarter with the scaling method. And then, the corresponding domain block of the quarter-sized image which is most similar with one range block of the half-sized image is searched within the limited area in order to reduce the encoding time extremely. This searched block is used in encoding. Also, we propose an algorithm provided much shorter encoding time and better compression ratio with a little degradation of the decoded image quality than Jacquin's method.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.28 no.11
• /
• pp.1637-1645
• /
• 2004

In remote control of telerobotics equipment, the real-time visual feedback is necessary in order to facilitate real-time control. Because of the network congestion and the associated delays, the real-time image feedback is generally difficult in the public networks like internet. If the remote user is not able to receive the image feedback within a certain time, the work performance may tend to decrease, and it makes difficulties to control of the telerobotics equipment. In this paper, we propose an improved visual feedback scheme over the internet for telerobotics system. The size of a remote site image and its quality are adjusted for efficient transmission. The constructed system has a better real-time update characteristics, and shows a potential for the real-time visual control of the telerobotics system.

• The Journal of the Korea Contents Association
• /
• v.8 no.7
• /
• pp.1-8
• /
• 2008

In this paper, an algorithm to compensate the inter-view mismatch in the multi-view video according to the different characteristics of cameras is presented. Interview mismatches make it difficult to merge the multi-view images and decrease the coding performance. So, a preprocessing operation to compensate the mismatches is requisite in the multi-view video coding. It is shown that the mismatch in the outputs of multi-view cameras with different electro-optical transfer functions can be approximated with a linear model of a gain and an offset. In addition, a new algorithm for estimating and compensating the inter-view mismatch based on the detection of the overlapped region is presented. Experimental results using various rectified stereo images show that the proposed method compensates inter-view mismatches more accurately compared to the conventional approach.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2003.05a
• /
• pp.347-350
• /
• 2003

The metal forming behavior and defect formation in Ti-6Al-4V tube during hot backward extrusion were investigated. To predict the forming-defects such as shear band, inner cracks or surface cracks, dynamic material model(DMM) including Ziegler's instability criterion and modified Cockcroft-Latham fracture criterion(C-L model) were used. These models were coupled to the internal variables generated from FE analysis. The chilling effect and friction indicated a great influence on the deformation mode of the tube and the formation of surface cracks. The simulation results for the backward extrusion were compared with the experimental observations.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.39 no.3
• /
• pp.58-65
• /
• 2002

In order to reduce blocking artifacts in inter-frame coded images, we propose a new image restoration algorithm, which directly processes differential images before reconstruction. We note that blocking artifact in inter-frame coded images is caused by both 8$\times$8 DCT and 16$\times$16 macroblock based motion compensation, while that of intra-coded images is caused by 8$\times$8 DCT only. According to the observation, we Propose a new degradation model for differential images and the corresponding restoration algorithm that utilizes additional constraints and convex sets for discontinuity inside blocks. The proposed restoration algorithm is a modified version of standard regularization that incorporate!; spatially adaptive lowpass filtering with consideration of edge directions by utilizing a part of DCT coefficients. Most of video coding standard adopt a hybrid structure of block-based motion compensation and block discrete cosine transform (BDCT). By this reason, blocking artifacts are occurred on both block boundary and block interior For more complete removal of both kinds of blocking artifacts, the restored differential image must satisfy two constraints, such as, directional discontinuities on block boundary and block interior Those constraints have been used for defining convex sets for restoring differential images.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.19 no.3
• /
• pp.180-188
• /
• 1999

The dynamic elastic properties of metal matrix composites were investigated by resonant ultrasound spectroscopy(RUS). The composites used in this study consisted of 2124 aluminum alloy reinforced with different concentrations of SiC particles. RUS can determine the nine independent elastic stiffness($C_{ij}$) for the orthorhombic symmetry on a small specimen simultaneously. The elastic constants were determined as a function of the volume fraction. A concept of effective aspect ratio. which combine the aspect ratio and the orientation of reinforcement. was used to calculate the initial moduli from Mori-Tanaka theory for the input of RUS minimization code. Young's moduli can be obtained from the measured stiffnesses. The results show that the elastic stiffness increases with increment of the particle content. The behavior of elastic stiffness indicates that the particle redistribution induced by the extrusion process enlarges the transversely isotropic symmetry as the fraction of reinforced particles increase. This relationship could be used for determination of the volume fractions of reinforcement as a potential tool of nondestructive material characterization.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.22 no.2
• /
• pp.88-94
• /
• 2010

A reliability analysis method is proposed in this paper to quantitatively evaluate the risk for internal stability of a quay wall constructed on the deep cement mixed ground, differentiating from the companion paper that mainly describes the external stability. Failure modes for toe pressure, shear strength of improved ground and extrusion of unimproved soft soil are investigated and compared in the risk estimation of internal stability using MVFOSM, FORM, and MCS. From the reliability analysis results for internal stability of a quay wall, the variance and distribution type of the compressive strength of Deep Mixed Soil-Cement appear to be very affective to the failure probability. On the other hand, other random variables seem to be relatively very insensitive to the probability of failure. It is therefore very important to rationally and accurately determine the probabilistic properties of the in-site compressive strength of Deep Mixed Soil-Cement.

• Journal of radiological science and technology
• /
• v.41 no.1
• /
• pp.61-66
• /
• 2018

The recent 3D printing technology is used in various medical, manufacturing, and education fields and is more efficient in terms of production process, time, and cost than existing production. Especially in fracture surgery, interest and research have been focused on improving accuracy, shortening of operation time and recovery time, and reducing reoperation. However, because of the financial and technical problems of the 3D printer and the file conversion program, the 3D printing is made directly at the hospital, and it is not generally used for diagnosis of fracture and surgical research. In this study, to solve those problems, clavicle CT imaging was switched into Osirix Open Source DICOM Viewer, Stereolithography file conversion programs and commercial Terarecon 3D DICOM Viewer, file conversion programs, and then clavicle fracture model was directly made through 3D printer of fused filament fabrication wire additive processing method, and then the accuracy of the shape was compared and analyzed. Clavicle fracture models printed in two methods were blind-tested on clinicians of general hospitals' orthopedics and radiologic technicians with over 10 years of experiences, and then their analysis opinions of resolution reviews were analyzed. The result showed no difference. The 3D printing model with open source DICOM STL file conversion program used was applicable to clinical, so it is considered useful in precision diagnosis of fracture and operation plans.