• Proceedings of the Korea Water Resources Association Conference
• /
• 2023.05a
• /
• pp.3-3
• /
• 2023

수자원위성은 C-band 영상레이더(synthetic aperture radar, SAR)를 탑재한 중형급의 수자원 관리 및 수재해 감시 전용 위성이다. 수자원위성은 물 환경과 관련된 다양한 분야에 활용되어 고부가가치의 정보를 제공할 것으로 예상되는데, 특히 시계열 레이더 간섭기법(SAR interferometry, InSAR)의 적용을 통해 댐·보와 같은 수자원시설물의 미세변위 탐지 및 안정성 평가에 효과적으로 사용될 것으로 기대된다. 시계열 영상레이더 간섭기법은 고정산란체를 이용하는 Persistent Scatterer InSAR(PSInSAR) 기법과 분산산란체 기반의 Small BAseline Subset(SBAS) InSAR 기법으로 대표된다. 이 연구에서는 수자원위성에 적합한 수리시설물 시계열 변위 모니터링 알고리즘 개발을 목적으로, Sentinel-1 위성의 C-band SAR 기반 시계열 레이더 간섭기법의 적용성을 평가하고 알고리즘 개발에 고려해야 할 사항들을 분석하였다. 2020년 여름 수재해가 발생한 섬진강댐과 담양댐 및 수변부를 테스트 사이트로 선정하고, 2019년부터 2021년까지의 Sentinel-1 시계열 SAR 영상에 PSInSAR와 SBAS InSAR를 적용하여 시계열 변위를 관측하였다. 댐체에서는 PSInSAR가 SBAS InSAR에 비해 신뢰할 수 있는 시계열 변위를 산출하였다. 그러나 시계열 분석 기간이 길어짐에 따라 PSInSAR 시계열 변위의 정밀도가 낮아지는 경향이 관측되었다. 수변부에서 PSInSAR는 변위 정보를 거의 제공하지 못했다. SBAS InSAR는 수변부의 시계열 변위 모니터링에 효과적이었으나, 여름철 장마 등으로 인해 레이더 간섭도의 긴밀도(coherence)가 낮아질 경우 부정확한 변위를 산출하였다. 앞으로 국내의 다양한 수자원시설물을 대상으로 Sentinel-1 위성을 이용한 시계열 변위 모니터링 알고리즘의 적용성 평가 연구가 진행될 예정이며, 연구 결과를 수자원위성의 관측 특성에 적합한 변위 탐지 알고리즘의 개발에 활용하고자 한다.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2019.11a
• /
• pp.206-208
• /
• 2019

섬이 많은 우리나라에는 섬에 전력을 공급하기 위하여 섬과 육지 혹은 섬과 섬 사이를 연결하는 전력공급선이 송전선이 많이 설치되어 있다. 송전선에는 또 헬리콥터가 비행을 할 때 헬리콥터와 송전선과의 충돌을 방지하기 위하여 항공장해표시구가 부착되어 있다. 이들 송전선 밑에 항로가 있을 경우 그곳을 지나는 선박의 레이더에 송전선에 의한 거짓상이 나타나 항해자가 소형 선박의 영상을 식별하는 데 어려움이 야기되기도 한다. 이 논문에서는 송전선에 의한 레이더 상이 발생하는 이유와 그 대책을 제시하고자 한다.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2022.06a
• /
• pp.28-30
• /
• 2022

본 연구에서는 컴퓨터 비전 기반의 딥러닝 객체 인식 기술을 이용하여 속초해수욕장에서 수집한 레이더 이미지에서 선박, 섬 및 부유체에 대해 탐지(Detection), 인식(Recognition)하는 연구를 수행하였다. 2021년 8월에 수집한 레이더 영상을 이용하여 본 연구를 수행하였으며, 움직이는 물표와 섬 등을 구분하였다. 일부 환경적인 제약에 따라 에러 발생이 있었지만, 향후 현재까지 수집한 레이더 영상을 추가하여 정확도를 높일 예정이다.

• Proceedings of the KSEEG Conference
• /
• 2003.04a
• /
• pp.284-287
• /
• 2003

영상레이더 SAR (Synthetic Aperture Radar)를 이용한 레이더 interferometry (InSAR) 기술은 지난 1990년대 동안 지표의 고도 정보 추출 및 지진, 화산, 빙하, 지반침하 등에 의한 표면산란체의 미세한 변위와 대기층과 관련된 연구 등 많은 분야에 응용되어 왔다[1][2][3]. 지반침하는 세계 여러 곳에서 발생하고 있으며, 대표적인 침하의 원인으로는 지진 및 화산, 지하 시설물의 건설, 폐광산의 공동, 그리고 지하수 유출 등이 있다. (중략)

• Korean Journal of Remote Sensing
• /
• v.13 no.1
• /
• pp.57-73
• /
• 1997

This paper is related to the correction of radiometric distortions induced by topographic relief. RADARSAT SAR image data were obtained over the mountainous area near southern part of Seoul. Initially, the SAR data was geometrically corrected and registered to plane rectangular coordinates so that each pixel of the SAR image has known topographic parameters. The topographic parameters (slope and aspect) at each pixel position were calculated from the digital elevation model (DEM) data having a comparable spatial resolution with the SAR data. Local incidence angle between the incoming microwave and the surface normal to terrain slope was selected as a primary geometric factor to analyze and to correct the radiometric distortions. Using digital maps of forest stands, several fields of rather homogeneous forest stands were delineated over the SAR image. Once the effects of local incidence angle on the radar backscatter were defined, the radiometric correction was performed by an empirical fuction that was derived from the relationship between the geometric parameters and mean radar backscatter. The correction effects were examined by ground truth data.

• Korean Journal of Remote Sensing
• /
• v.26 no.5
• /
• pp.581-591
• /
• 2010

In this paper, we proposed a new wavelet-based image fusion algorithm, which has advantages in both frequency and spatial domains for signal analysis. The developed algorithm compares the ratio of SAR image signal to optical image signal and assigns the SAR image signal to the fused image if the ratio is larger than a predefined threshold value. If the ratio is smaller than the threshold value, the fused image signal is determined by a weighted sum of optical and SAR image signal. The fusion rules consider the ratio of SAR image signal to optical image signal, image gradient and local variance of each image signal. We evaluated the proposed algorithm using Ikonos and TerraSAR-X satellite images. The proposed method showed better performance than the conventional methods which take only relatively strong SAR image signals in the fused image, in terms of entropy, image clarity, spatial frequency and speckle index.

• Journal of Environmental Policy
• /
• v.8 no.2
• /
• pp.1-23
• /
• 2009

This study applied satellite radar imagery to identify flooded areas and examined post-flooding conditions using time-series satellite radar imagery for the development of flood damage mitigation strategies. Using time-series satellite radar images, this study constructed a map delineating areas vulnerable to frequent flood damage. The extracted flooded areas were combined with reference land use maps to examine flood damage by land use type. Major landuse types with severe flood damage were agricultural and forested areas. The analysis of the damage conditions, in terms of land use, served as the basis for developing flood damage mitigation policies, in conjunction with land use planning. The policies for flood damage mitigation can be summarized as land use regulations, land use planning, and flood damage mapping. A preventive measure to minimize flood damage of properties, which regulates developing areas with high flooding potential, is highly recommended. Although this study suggested a number of policies for flood damage mitigation, they represent only a small number of possible policies useful for mitigating flood damage and other environmental problems. Based upon the results of this study, it may be concluded that satellite radar imagery has great potential in providing basic data for large-scale environmental problems such as flooding and oil spills. Nevertheless, further examinations should be conducted and the application of satellite radar imagery should be used to examine other environmental problems.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.41 no.11
• /
• pp.1653-1660
• /
• 2016

The synthetic aperture rardar (SAR) is an active sensor using microwaves. It transmits a microwave signal, called a chirp pulse, and receives the reflected signal in a moving platform such as satellite and unmanned aerial vehicle. Since this sensor uses microwaves that can penetrate the atmosphere, SAR generates the images regardless of light and weather conditions. However SAR operates on the moving platform, the Doppler shift and the side-looking observation method should be considered. In addtion, a residual image or ghost image can be occurred according to selection of the pulse repetition frequency (PRF). In this paper, a range design of the PRF for the L-band spaceborne SAR system is studied for prevention of SAR image distortion. And the system is studied for prevention of SAR image distortion. And the system parameter and the PRF are calibrated iteratively according to the proposed system design procedure and design constraints. The MATLAB based on SAR system simulator has been developed to verify the validity of calculated PRF. The developed simulator assumes that SAR sensor is operated by the PRF calculated from the design. The results of the simulator show that the targets in image has a valid peak to side-lobe ratio (PSLR) so that the PRF can be used for the spaceborne SAR sensor.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.34 no.8
• /
• pp.104-108
• /
• 2006

There are range and azimuth direction resolution of synthetic aperture radar on the aircraft or satellite. Wide bandwidth chirp pulse generation technology is prerequisite for SAR image with fine resolution. There are two kinds of digital chirp pulse generation technology as arbitrary waveform generator(AWG) and direct digital synthesizer(DDS). In this paper, we design and implement a digital chirp pulse generator to generate 300MHz wide bandwidth linear FM chirp pulse for the fine resolution image with direct digital synthesizer. Implemented chirp pulse generator can be useful for the SAR sensors to make 50cm range resolution image.

• Journal of Navigation and Port Research
• /
• v.39 no.4
• /
• pp.307-312
• /
• 2015

ARPA(Automatic Radar Plotting Aid) is a device to calculate CPA(closest point of approach)/TCPA(time of CPA), true course and speed of targets by vector operation of relative courses and speeds. The purpose of this study is to develop target acquisition and tracking technology for ARPA Radar implementation. After examining the previous studies, applicable algorithms and technologies were developed to be combined and basic ARPA functions were developed as a result. As for main research contents, the sequential image processing technology such as combination of grayscale conversion, gaussian smoothing, binary image conversion and labeling was deviced to achieve a proper target acquisition, and the NNS(Nearest Neighbor Search) algorithm was appllied to identify which target came from the previous image and finally Kalman Filter was used to calculate true course and speed of targets as an analysis of target behavior. Also all technologies stated above were implemented as a SW program and installed onboard, and verified the basic ARPA functions to be operable in practical use through onboard test.