• Journal of the Korean Society of Clothing and Textiles
• /
• v.27 no.9_10
• /
• pp.1093-1100
• /
• 2003

Following a treatment with edible oils and/or washing, the tensile properties of vulcanized rubber were measured to assess the effect of the sorbed edible oil. Rubber soiled with soybean oil, after 8 weeks storage in a 30$^{\circ}C$ incubator, retained 61% of its original strength, and rubber soiled and washed retained the 73%. The strength of the rubber soiled with oil decreased remarkably during the first 2 weeks. After repeating this soiling and/or washing 7 times, the soiled rubber had only 16％ of its original strength, the rubber soiled and washed had 45%. In all cases, breaking elongations were not decreased as much as tensile strengths; therefore , more of the elasticity of the rubber remained than did the strength. From these results it is concluded that washing after soiling with oils is very helpful in maintaining the strength of rubber. In this study, three different surfactant solutions, AS, AE and AS/AE, were used. In the AS solution, the contact angle of the soybean oil was greater and the work of the detergency was the smaller than in either the AE or the AS/AE solution, the loss of the strength of the rubber washed in AS solution did not decrease significantly. These results suggest that rolling-up, emulsification and solubilization also participate in the removal of oil from rubber.

• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2011.11a
• /
• pp.53-53
• /
• 2011

자동차용 천연가죽 시트의 제조 공정에서 크롬과 비크롬 Metalic 탄닝제, 식물성 탄닝제, 신탄(Syntan) 및 가지제(Fatliuor) 등의 종류와 함량에 따른 인장강도, 신장율, 정하중 신율, 잔류줄음율 등을 측정하여 특정하중에 따른 콜라겐 섬유 조직의 영구변형율과의 상관관계를 비교 분석해본 결과, 크롬 및 비크롬계 탄닝제에 비해 식물성 탄닝제를 적용하였을 때 조직의 변형율이 적었으며, 리틴닝 공정에서 아크릴계, 레진계 및 단백질계 신탄을 혼합 적용하였을 때 가죽의 배(Belly)부위의 물성 균일화 효과가 우수하였으며, 음이온성 가지제 9%를 사용하여 가죽에 유연성을 부여함으로써 조직이 치밀하고 변형율이 감소되어 내구성이 우수한 결과를 나타내었다.

• Journal of Convergence for Information Technology
• /
• v.9 no.11
• /
• pp.254-258
• /
• 2019

To protect healthy and beautiful hair, the hair protection effect was tested by adding an aloe extract from the hair solution. The treatment groups were grouped into four categories: Group II (Famma Treatment Only), Group III (Oxidase+aloe), Group IV (Reduce+aloe), and Group V (Oxidase+aloe, Release+aloe). The test hair is collected from women's hair in their 20s, 30s and 40s who have not undergone chemical treatment such as permanent and dying for one year and use 100% aloe stock solution. In order to evaluate hair thickness, cuticles, tensile strength, elongation and formation rate, the experiment environment was 28.9 degrees and 72% humidity. All statistical tests were done at 5% significant level. Cuticle, elongation, and formation rate were significantly improved (P<.05) and cuticle was best in group V, elongation was group III. In conclusion, aloe added to perm treatment were effective in improving cuticle, elongation rate, and formation of hair.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2017.05a
• /
• pp.160-162
• /
• 2017

When rubber elastomer has contact with fuel, since the component and additive having low molecular weight can flow out, the physical properties of both elastomer and fuel could be hindered. In order to predict the life of the rubber elastomer, this study is to determine the change of weight, thickness, hardness, strain, and compression set as mechanical properties of the sealant rubber O-ring, which was dependent on volume, temperature, and storage time of the contacted fuel. We also determined purity of fuel via GC analysis and measured gross heat of combution. The results could be used as a reference to evaluate the life of the rubber elastomer.

• Korean Journal of Environment and Ecology
• /
• v.20 no.4
• /
• pp.425-435
• /
• 2006

The objectives of this research were to investigate the drought resistance as well as the growth of Wisteria floribunda seedlings with the soil water conditions. The seedlings for the research were grown in pots with strict water content control on a frame located outdoors. During the experiments, the soil water contents were adjusted to 5, 10, 20, 30, 40, 50, 60, and 70%. In addition, the effects of Rhizobium inoculation on the growth of seedlings were investigated. The experimental results are summarized as follows: 1. The seedlings in the pots with 5% soil water content withered to death due to the water stress. Withering or any distinct growth was not observed from the seedlings in the 10% soil water content. It can be inferred from these results that about 5% of soil water content is the wilting point of W. floribunda seedlings and about 10% is the critical soil water content of its growth in this experiment soils. Therefore, it seems that W. floribunda possesses a good drought resistance. 2. From the analyses of the main growth parameters such as stem elongation, diameter growth, leaf area growth and total dry weight, it was found that the seedling growth can be improved with increasing soil water contents. The relation between each growth parameter(Y) and the soil water contents(W) was well described by a quadratic equation, $Y=a+bW+cW^2$. 3. In soil water contents higher than 20%, the seedling growth(Y) was remarkable along with-its extended growing period, and related to the growing period(D) by a quadratic equation, $Y=a+bD+cD^2$. 4. The artificial inoculation of Rhizobiun promoted the growth of Wisteria floribunda seedlings. 5. Rhizobium was found to be more readily inoculated and to form more root nodules compared to seedlings grown in higher soil water contents.

• Korean Chemical Engineering Research
• /
• v.53 no.3
• /
• pp.282-288
• /
• 2015

A new energetic thermoplastic elastomer based on the azidated polybutadiene(Az-PBD)/ethylene vinyl acetate copolymer (EVA) blends was prepared, and structure and properties of the blends were invetigated by SEM, DSC, DMA, tensile testing and combustion test. The Az-PBD was synthesized via a two-step process involving the addition reaction of commercially available 1,2-PBD with $Br_2$ and subsequent nucleophilic substitution reaction of the brominated PBD with $NaN_3$. EVA/Az-PBD with 90/10, 80/20, 70/30 (wt/wt) was prepared by a solution blending. SEM, DSC, and DMA results revealed that the blends are partially compatible and Az-PBD is dispersed in continuous EVA matrix. Tensile test showed that modulus and tension set increased while elongation-at-break of the blends decreased with increasing Az-PBD content in the blends, but all the blends showed a elongation at break as high as 700% and a tension set of less than 5%, indicating that the blends are typically elastomeric. Combustion test showed that, with increasing Az-PBD content in the blend, higher energy can be released.

• Journal of the Korean Applied Science and Technology
• /
• v.16 no.2
• /
• pp.179-185
• /
• 1999

The effect of blowing agents and inner temperature on the machanical properties of the flexible polyurethane foams were investigated. In the study used that chemical blowing agents is $H_2O$ and support blowing agents. CFC-11, HCFC-114b, dichloromethane, n-penthane, iso-pentane, cyclopentane. The flexible polyurethane foams were foamed by the density of $0.015{\pm}0.002g/cm^3$ and $0.024{\pm}0.002g/cm^3$ which were used in mechanical properties measurements. Inner temperature was measure as long as the preparation of the flexible polyurethane foams of each blowing agents. The density, tensile strength, elongation, tear strength, compression strength and compression set were measured after 48 hours hardening. The result of the study was optimized dichloromethane and cyclopentane at the support blowing agents.

• Journal of Chest Surgery
• /
• v.39 no.4 s.261
• /
• pp.289-297
• /
• 2006

Background: Surgery for Stanford type A aortic dissection shows a high operative mortality rate and frequent postoperative brain injury. This study was designed to find out the risk factors leading to operative mortality and brain injury after surgical repair in patients with type A aortic dissection. Material and Method: One hundred and eleven patients with type A aortic dissection who underwent surgical repair between February, 1995 and January 2005 were reviewed retrospectively. There were 99 acute dissections and 12 chronic dissections. Univariate and multivariate analysis were performed to identify risk factors of operative mortality and brain injury. Resuit: Hospital mortality occurred in 6 patients (5.4%). Permanent neurologic deficit occurred in 8 patients (7.2%) and transient neurologic deficit in 4 (3.6%). Overall 1, 5, 7 year survival rate was 94.4, 86.3, and 81.5%, respectively. Univariate analysis revealed 4 risk factors to be statistically significant as predictors of mortality: previous chronic type III dissection, emergency operation, intimal tear in aortic arch, and deep hypothemic circulatory arrest (DHCA) for more than 45 minutes. Multivariate analysis revealed previous chronic type III aortic dissection (odds ratio (OR) 52.2), and DHCA for more than 45 minutes (OR 12.0) as risk factors of operative mortality. Pathological obesity (OR 12.9) and total arch replacement (OR 8.5) were statistically significant risk factors of brain injury in multivariate analysis. Conclusion: The result of surgical repair for Stanford type A aortic dissection was good when we took into account the mortality rate, the incidence of neurologic injury, and the long-term survival rate. Surgery of type A aortic dissection in patients with a history of chronic type III dissection may increase the risk of operative mortality. Special care should be taken and efforts to reduce the hypothermic circulatory arrest time should alway: be kept in mind. Surgeons who are planning to operate on patients with pathological obesity, or total arch replacement should be seriously consider for there is a higher risk of brain injury.