• The Journal of the Convergence on Culture Technology
• /
• v.6 no.2
• /
• pp.467-472
• /
• 2020

Methods for deriving design input-parameters to ensure the stability of a structure on a common ground are generally well known. Folded metamorphic rocks, such as the study area, are highly foliated and have small faults parallel to the foliation, resulting in special research methods and tests to derive design input parameters, Etc. are required. The metamorphic rock ground with foliation development of several mm intervals has a direct shear test on the foliation surface, the strike/dip mapping of the foliation, the boring investigation to determine the continuity of the foliation, and the rock mass rating of the metamorphic rock. etc. are required. In the case of a large number of small foliation-parallel faults developed along a specific foliation plane, it is essential to analyze the lineament, surface geologic mapping for fault tracing, and direct shear test. Folded ground requires additional geological-structural-domain analysis, discontinuity analysis of stereonet, electrical resistivity exploration along the fold axis, and so on.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2009.09a
• /
• pp.775-784
• /
• 2009

Weathered foliation could act as a critical failure plane because this type of plane tend to have low roughness and long extensions. A big constructed slope at $\bigcirc\bigcirc$ road construction site was failed due to the block movement along a fault zone which is parallel to foliation. Tectonic activity reactivated a fault zone parallel to foliation, and the fault clay within the shear zone metamorphosed retrogressively to chrolite. The failed block moved when the block weigh lost the balancing with the resisting force of the retrogressively metamorphosed chrolite. Evaluating the three dimensional distribution of the foliation was critical for establishing a plan for the stabilization of the slope. For this purpose, 10 boreholes were drilled as a lattice distribution, and the BIPS analyses are performed at each boreholes. The fractures measured in the boreholes are projected into 15 cross sections and their distributions are analysed, using Fracjection software. The projection analyse show that the strike of the foliation gets dipper towards left side of the slope. This geometry indicates that there are more failure block geometry at left side of the slope. Potential failure planes are searched using the projection method, and these information are provided for further support design.

• Proceedings of the Mineralogical Society of Korea Conference
• /
• 2003.05a
• /
• pp.84-85
• /
• 2003

소백산육괴의 동부에 분포하는 영양-울진지역의 선캠브리아기 변성암류는 평해층, 기성층, 원남층, 평해화강편마암, 하다우백질화강편마암 등으로 구성되어 있다(김옥준 외, 1963). 그러나, 최근 김남훈 외(2001, 2002)은 야외조사연구와 암석학적 및 지구화학적 연구를 통하여 주로 변성화산암류로 기재되었던 기성층은 변성화산암류가 아니라 평해층과 원남층에서 산출되는 화강암질편마암과 각섬암 기원의 변성암류가 연성전단변형을 받아 형성된 압쇄암 내지 초압쇄암으로 되어 있고, 기존의 기성층은 변성화산암류와 같이 성분상으로 구분되는 별개의 층이 아닌 구조적으로 만들어진 연성전단대의 중심부일 가능성을 시사한 바가 있다. 본 연구는 연성전단대의 연장성 및 연성전단대 형성과 관련된 지구조운동의 특성을 파악하고, 중첩된 변형구조들의 선후관계로부터 영양-울진지역 선캠브리아기 변성암류에 대한 변형작용사를 규명하기 위해 기성층의 분포지를 중심으로 이 지역 선캠브리아기 변성암류에 대한 상세한 야외지질조사를 실시하였다. 그 결과, 예천(북후면-평은면)지역을 통과하여 봉화 부근에서 동북동-서남서 방향이 동-서 방향으로 전환하여 장군봉지역까지 연장되는 것으로 알려져 있는 우수 주향 이동성 예천전단대(KIGAM, 1995; 강지훈 외 1997; 강지훈, 2000; 강지훈과 김형식, 2000)는 영양-울진지역까지 연장됨이 확인된다. 또한, 영양-울진지역의 선캠브리아기 변성암류에는 연성전단변형 이전에 적어도 한 번의 습곡작용과 이후에 적어도 두 번의 습곡작용이 인지된다. 각 변형단계별 특징적인 구조요소를 요약하면 다음과 같다. D1 변형: 편마면 내지 편리(S0)가 습곡되어 형성된 F1 습곡은 동-서 방향의 준 수평적인 습곡축을 갖는 뿌리 없는 등사습곡 형태로 인지된다. 양 날개부의 S0 엽리는 F1 습곡축면(S1)으로 완전히 전위된 하나의 엽리(S0-1)로 나타나고, S0-1 엽리는 이 지역의 광역엽리로 인지된다. S0-1 광역엽리는 구성암류의 대상 분포 방향과 유사한 서북서 주향에 북쪽으로 중각 경사하는 집중된 방향성을 보이며 분산되어 나타난다. D2 변형: 변형구조로는 신장선구조, 압쇄구조면, 비대칭습곡 등으로 인지된다. 신장선구조는 S0-1 엽리면상에서 주로 신장된 석영(집합체)과 장석(집합체)들의 정향배열에 의해 정의되고, S0-1 엽리의 주향 방향으로 저각으로 침강하는 집중된 방향성을 보이며 분산되어 나타난다. 신장선구조에 평행하고 S0-1 엽리에 수직한 단면에서는 상부-동쪽-이동의 우수주향 이동성 연성 전단운동감각을 지시하는 구조요소들이 다량 관찰된다. 연성전단변형에 의해 형성된 압쇄구조면은 전단엽리와 압쇄엽리에 각각 해당하는 C면과 S면 등이 인지된다. 전단엽리 C면은 S0-1 광역엽리와 거의 일치하고, 압쇄엽리 S면은 F2 비대칭습곡의 축면엽리와 거의 일치한다. S0-1 엽리를 습곡시키는 F2 비대칭습곡은 S0-1 엽리를 전단면으로 하여 상부-동쪽-이동 전단운동에 의해 형성된 밀착습곡 형태로 인지된다. F2 습곡축은 북동 방향으로 중각 내지 저각 침강하고 F1 습곡축과는 65$^{\circ}$-75$^{\circ}$ 범위의 사이각을 이룬다. F2 습곡축면은 동북동 주향에 북쪽으로 중각으로 경사하고 F1 습곡축면과는 20$^{\circ}$-40$^{\circ}$ 범위의 사이각을 이룬다. D3 변형. S0-1 엽리와 압쇄구조면 등을 습곡시키는 F3 습곡은 준 수평적인 습곡축과 습곡축면을 갖는 개방 횡와습곡의 형태로 인지된다. D4 변형: F4 습곡은 비대칭 공역성 킹크습곡, 공역성 충상단층에 수반되어 나타나는 드래그습곡, 대칭 개방 직림습곡 등의 다양한 습곡 형태로 인지된다. 이들 F4 습곡의 축면엽리는 일반적으로 동-서 주향에 남쪽과 북쪽으로 경사한다. 그 경사각은 비대칭 공역성 킹크습곡(저각), 드래그습곡(중각), 대칭 개방 직립습곡(고각) 순으로 고각을 이룬다. F4 습곡축은 동쪽과 서쪽으로 저각 침강하는 집중된 방향성을 보인다. 공역성 충상단층은 동-서 주향에 남쪽과 북쪽으로 경사하는 단층면과 상부가 북쪽과 남쪽으로 충상하는 운동상을 보인다. 드래그습곡의 축면엽리는 이러한 공역성 충상단층운동의 전단압축방향에 수직으로 발달한다. 이러한 D4 변형구조는 남-북 방향의 압축 지구조 환경하에서 형성된 것으로 고찰된다.

• Journal of the Korean GEO-environmental Society
• /
• v.2 no.1
• /
• pp.37-56
• /
• 2001

As a preliminary study to establish fracture network model in crystalline rocks, detail investigation on fracture characteristics were performed. Five fracture sets were determined on the basis of regional survey of geological structures and fractures on outcrops. Among the fracture sets, S1 set has the highest density and longest trace length of fractures which was identified on surface in the study area. S4 and S5 sets are composed of foliations and foliation parallel shear joints of gneisses, which are very important sets at the aspect of weighting of fracture length. For characterization of subsurface fractures, detail core logging was performed to identify fractures and fracture zones from five boreholes. Acoustic televiewer logging and borehole geophysical loggings produced images, orientations and geophysical properties of fractures which intersect with boreholes. According to the result of the investigations, subsurface fractures can be grouped as three preferred orientations(B1, B2 and B3), which correspond to S1, S2 and S4/S5 of surface fracture sets, respectively. Actually, B1 set is expected to be intensely developed at subsurface. However, it has low frequency of intersection with boreholes due to its parallel or sub-parallel direction to boreholes. According to the inference of conductive fractures, B1 and B3 sets have possibilities of water flow and their intersection lines are also thought to consist of important conduits of groundwater flow. In particular, faults which are parallel to foliations control major groundwater flow in the study area.

• The Journal of the Petrological Society of Korea
• /
• v.14 no.2 s.40
• /
• pp.108-115
• /
• 2005

Gyeonggi metamorphic complex in the Gwangju area include banded biotite gneiss and quartzofeldspathic gneiss. Detailed structural analysis suggests that structural elements in the study area were formed by at least five phase of deformations. Penetrative compositional foliations(S1) formed in the banded gneiss during the first metamorphism and deformation (D1). After intrusion of plutonic rocks, the second deformation (D2) produced S2 foliations in the banded gneiss and quartzofeldspathic gneiss during the second metamorphism. D3 structures are represented by isoclinal folds (F3) whose axial surfaces are parallel to S3 foliations. The N-S oriented shortening (D4) was accommodated by closed upright F4 fold with about 100m of axial surface separation. F4 fold is refolded by regional F5 folding resulting in different orientation and fold style of F4 fold according to the position of F5 fold. The F4 fold with tight interlimb angle is subparallel to the axial surface (north-south) of F5 fold in the core of the F5 fold. In contrast the F4 fold trends northeast in the western limb and northwest in the eastern limb of F5 fold. The interlimb angle is larger in the limbs than that in the core of F5 fold. The trace of foliations is constrained by mainly F4 and F5 folds. Joint fanning around fold is developed in the limbs of F5 fold and bc joints are dominant in the hinge area of F5 fold. A strike-slip fault had developed in tile central part of the study area after F5 folding. The orientation of joint and foliation is rotated anticlockwise about $15^{\circ}$ by the landslide occurred during the Quaternary.

• The Journal of Engineering Geology
• /
• v.20 no.2
• /
• pp.183-189
• /
• 2010

Fault gouge samples were collected from the fault cores of the boundary faults between the Cretaceous Basement and the Tertiary Waeup Basin. Fractal dimensions (D) were obtained by using survivor grains which were analysed from six thin sections of the gouges under the optical microscope. The elliptical survivor grains show a shape preferred orientation almost parallel to clay foliation in matrix, suggesting that it was formed by the rotation of the survivor grains in abundant fine-grained matrix during repeated fault slips. The size distributions of the survivor grains follow power-laws with fractal dimensions in the 2.40-3.02 range. D values of all samples but one are higher than a specific D value equal to 2.58 which predicts the self similarity of fragmentation process in constrained comminution model (Sammis et al., 1987), which indicates large fault slip and multiple faulting. Probably the higher D values than 2.58 mean the non-self-similar evolution of cataclastic rocks where fragmentation mechanism changed from constrained comminution to the grain abrasion accompanying selective fracture of larger grains.

• Economic and Environmental Geology
• /
• v.49 no.4
• /
• pp.315-323
• /
• 2016

This study reports a gneiss dome in the Hongseong area, southwestern margin of the Gyeonggi massif. This gneiss dome, named here as 'Oseosan dome' because it is located around the Oseosan, the highest peak along the western coastal area, is composed mainly of the Neoproterozoic to Paleozoic ortho- and paragneiss, mafic metavolcanic rock, and metadolerite. Migmatization affected these rock units, in which leucocratic(granitic) materials derived from anatexis frequently occur as patch and vein parallel to or cutting through internal foliation. The Oseosan dome shows overall concentric geometry and outward-dipping internal foliation, but also partly complicatedly changeable or inward-dipping foliation. Taking available petrological and geochronological data into account, the Oseosan dome is interpreted to be exhumed quickly into the upper crustal level during the Late Triassic, accompanied in part with anatexis and granite intrusion. In addition, extensional shear zone intruded by the Late Triassic synkinematic granite and sedimentary basin have been reported around the Oseosan dome. These evidences possibly suggest that the Oseosan dome formed in closely associated with the Late Triassic extensional movement and diapiric flow. Alternatively, 1) thrust- or reverse fault-related doming or 2) interference between independent folds during structural inversion of the Late Traissic to Middle Jurassic sedimentary basin can be also considered as dome-forming process. However, considering the northern limb of the Oseosan dome, cutting by the Late Traissic granite, and the southern limb, cutting by contractional fault reactivated after the Middle Jurassic, it is likely that the domal structure formed during or prior to the Late Triassic.

• Economic and Environmental Geology
• /
• v.41 no.3
• /
• pp.299-314
• /
• 2008

The NE-trending Honam shear zone is a broad, dextral strike-slip fault zone between the southern margin of the Okcheon Belt and the Precambrian Yeongnam Massif in South Korea and is parallel to the trend of Sinian deformation that is conspicuous in Far East Asia. In this paper, we report geochemical and isotopic(Sr and Nd) data of mylonitic quartz-muscovite Precambrian gneisses and surrounding foliated hornblende-biotite granitoids near the Myeongho area in the Yecheon Shear Zone, a representative segment of the Honam Shear Zone. Foliated hornblende-biotite granitoids commonly plot in the granodiorite field($SiO_2=61.9-67.1\;wt%$ and $Na_2O+K_2O=5.21-6.99\;wt%$) on $SiO_2$ vs. $Na_2O+K_2O$ discrimination diagram, whereas quartz-muscovite Precambrian orthogneisses plot in the granite field. The foliated hornblende-biotite granitoids are mostly calcic and calc-alkalic and are dominantly magnesian in a modified alkali-lime index(MALI) and Fe# [$=FeO_{total}(FeO_{total}+MgO)$] versus $SiO_2$ diagrams, which correspond with geochemical characteristics of Cordilleran Mesozoic batholiths. The foliated hornblende-biotite granitoids have molar ratios of $Al_2O_3/(CaO+Na_2O+K_2O)$ ranging from 0.89 to 1.10 and are metaluminous to weakly peraluminous, indicating I type. In contrast, Paleoproterozoic orthogneisses have peraluminous compositions, with molar ratios of $Al_2O_3/(CaO+Na_2O+K_2O)$ ranging from 1.11 to 1.22. On trace element spider diagrams normalized to the primitive mantle, the large ion lithophile element(LILE) enrichments(Rb, Ba, Th and U) and negative Ta-Nb-P-Ti anomalies of foliated hornblende-biotite granitoids and mylonitized quartz-muscovite gneisses in the Yecheon Shear Zone are features common to subduction-related granitoids and are also found in granitoids from a crustal source derived from the arc crust of active continental margin. ${\varepsilon}_{Nd}(T)$ and initial Sr-ratio ratios of foliated hornblende-biotite granitoids with suggest the involvement of upper crust-derived melts in granitoid petrogenesis. Foliated hornblende-biotite granitoids in the study area, together with the Yeongju Batholith, show not changing contents of specific elements(Ti, P, Zr, V and Y) from shear zone to the area near the shear zone. These results suggest that no volume changes and geochemical alterations in fluid-rich foliated hornblende-biotite granitoids may occur during deformation, which mass transfer by fluid flow into the shear zone is equal to the mass transfer out of the shear zone.

• The Journal of Engineering Geology
• /
• v.20 no.3
• /
• pp.329-338
• /
• 2010

The foundation area for tram contains biotite gneiss, quartzo-feldspathic gneiss, calc-silicate rock, and porphyroblastic gneiss of the pre-Cambrian Kyeonggi gneiss complex. These rocks record at least three stages of deformation, as indicated by fold sets of contrasting orientations (D1-D3). Joints are generally steeply dipping and strike NW-SE to WNW-ESE. The Gonjiam Fault, which strikes WNW-ESE, follows a river in the area. The fault possesses a 3-m-wide fracture zone, a 10-m-wide damage zone, and is 15 km long. Two tunnels have been constructed through the biotite gneiss. The geometric relationship between discontinuities (e.g., joints and foliation) and tunneling direction reveals that set 3 of the AA tunnel is unstable but that BB tunnel is relatively safe.

• Economic and Environmental Geology
• /
• v.52 no.2
• /
• pp.159-168
• /
• 2019

The western Gyeonggi Massif, where records evidence of Phanerozoic subduction/collision tectonics, is an important area to understand the crustal evolutionary history of the Korean Peninsula. This study presents geometric and kinematic characteristics of the geological structures of the Taean Formation in the Gomseom area, southwestern Gyeonggi Massif. We interpreted the geometric relationships between structural elements, and conducted stereographic and down-plunge projections for structural domains. As a result, at least three different deformational events ($D_1$, $D_2$ and $D_3$) are recognized in the study area. In the first deformational event ($D_1$), regional foliations being well defined by the preferred orientation of muscovite and biotite were formed. In the second deformational event ($D_2$), NNE-trending low-angle contractional faults and related crenulation lineations/cleavages were formed. The crenulation lineations shallowly plunge toward SSW~SSE or NNW~NNE. In the third deformational event ($D_3$), SE-plunging folds and NE-trending high-angle faults were formed as 'fault-related fold' and 'fold-accommodation fault', indicating that the $D_3$ folds and faults are genetically linked to each other. This contribution provides important insights into the structural evolution of the Taean Formation along western Gyeonggi Massif, where had evolved as subduction/collisional orogenic belts in the East Asia.