• Korean Chemical Engineering Research
• /
• v.48 no.5
• /
• pp.643-648
• /
• 2010

Production of biodiesel from soybean oil catalyzed by Lewis acidic ionic liquids(ILs) containing metal chloride salts was investigated in this study. Metal chloride salts, such as $SnCl_2$, $ZnCl_2$, $AlCl_3$, $FeCl_3$ and CuCl, were screened for oil transesterification in the range of 363-423 K. Among these metal chlorides, tin chloride showed particularly high catalytic property for the oil transesterification. Similarly, among these Lewis acidic ionic liquid catalysts, $[Me_3NC_2H_4OH]Cl-2SnCl_2$ resulted in a high fatty acid methyl esters(FAMEs) content of 91.1% under the following reaction conditions: 403 K, 14 h, and a molar ratio of 1:12:0.9 (oil:methanol:catalyst). Unlike the pure tin chloride catalysts, Lewis acidic ILs containing tin chloride $[Me_3NC_2H_4OH]Cl-2SnCl_2$ catalyst could be recycled up to five times without any significant loss of activity by separating from the FAMEs with simple decantation. The Lewis acidity and high moisture-stability of this catalyst appeared to be responsible for the excellent catalytic performance. The effects of reaction time and the molar ratio of methanol/catalyst to oil on the FAMEs production were also studied in this work.

• Journal of the Korean Chemical Society
• /
• v.23 no.6
• /
• pp.392-395
• /
• 1979

Some alkyl or aryl halides, such as ethyl bromide, butyl chloride, phenyl bromide and benzyl chloride, were reacted by Grignard's method with anhydrous tin tetrachloride in hydrocarbon media. When small amounts of ether were added into the Grignard reaction step, the reaction proceeded rather smoothly and gave good yields of corresponding organotin compounds.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.07b
• /
• pp.1022-1025
• /
• 2003

본 연구에서는 저온 동시 합성법을 이용하여 ITO 나노 분말을 제조하였다. 저온 동시 합성법은 기존의 염화 인듐 및 염화 주석 염이 아닌 인듐 및 주석 유기물 염들을 사용하므로 기존의 $600{\sim}700^{\circ}C$가 아닌 $300^{\circ}C$ 이하에서 공정이 가능하고, 이로써 초미세급의 나노 분말을 얻을 수 있다. 또한 두가지 유기물 염을 동시에 산화시킴으로써 한번에 동시 합성이 가능하다. 이러한 저온 동시 합성법으로 제조한 나노 분말을 분석한 결과 분말의 크기는 평균 5 nm, 비 표면적은 약 $104m^2/g$ 이었다. 또한 EDS 및 XRD 분석 결과 분말의 결정상은 $In_2O_3$ 격자 내에 $3{\sim}8%$의 Sn이 고용된 [222], [400], [440]의 입방정 구조인 고품질의 ITO 나노 분말을 제조할 수 있었다.

• 월간산업보건
• /
• s.280
• /
• pp.27-31
• /
• 2011

Vinyl chloride(염화비닐)에 대한 직업적 노출기준인 TLV-TWA를 1 ppm (2. 6 mg/$m^3$)으로 권고한 것은 간암의 가능성과 특히 간혈관육종을 최소화하기 위한 것이다. 염화비닐과 간암에 대한 명확한 사람들의 사례와 역학조사 결과를 근거로 사람에서의 확실한 발암성물질인 Al으로 분류하였다. 피부 (Skin), 감작제(SEN)의 경고주석과 TLV-STEL.을 권고하기에는 자료가 불충분하다.

• Resources Recycling
• /
• v.17 no.2
• /
• pp.70-75
• /
• 2008

A study on the cementation for the recovery of tin with aluminium in the hydrochloric acid solution was carried out. Parameters, such as aluminium metal equivalent, pH, reaction time, reaction temperature and the concentration of chloride ions were investigated. The experimental results showed that the cementation rate of Sn(II) ions increased with increase of the addition amount of aluminium powders, temperature, pH and the concentration of chloride ions in hydrochloric acid solution. From the results, the optinum conditions for recovery of metallic tin by cementation with aluminium metal powders were proposed.

• 월간산업보건
• /
• s.383
• /
• pp.9-12
• /
• 2020

눈과 호흡기의 자극 가능성을 최소화하기 위해 오염화인(Phosphorus pentachloride)에 대한 직업적 노출기준인 TLV-TWA를 0.1ppm(0.85 mg/㎥)으로 권고하였다. 동물 또는 사람의 오염화인 노출에 대한 독성자료는 매우 제한적이며, 삼염화인(Phosphorus trichloride)과 유사하게 물이나 상대습도가 높은 공기 중에서 염산(Hydrogen chloride)과 인산(Phosphoric acid)으로 가수분해된다. 따라서 삼염화인, 염산 그리고 인산에 대한 TLV Documentation을 참조해야 한다. 피부 흡수(Skin), 감작제(SEN), 발암성 표기에 대한 경고주석과 TLV-STEL을 권고하기에는 유용한 자료가 부족하다.

• 월간산업보건
• /
• s.385
• /
• pp.9-13
• /
• 2020

삼염화인(Phosphorus trichloride)의 노출기준은 눈, 피부, 점막 그리고 호흡기계 기관지 자극의 가능성을 최소화하기 위해 TLV-TWA는 0.2ppm(1.1 mg/㎥), TLV-STEL은 0.5ppm(2.8 mg/㎥)으로 권고하였다. 삼염화인은 직접 피부 접촉 시 심각한 화상을 유발할 수 있으며 공기 중 농도 2ppm~27ppm 범위에서 작업자가 급성 노출되면 인두, 기침, 호흡 곤란 및 심한 천식 기관지염을 유발하는 것으로 보고되었다. 물 또는 습한 공기에서 삼염화인은 염산 및 인산으로 분해된다.(ACGIH의 인산 TLV 문서를 참조하는 것이 필요함). 피부흡수(Skin), 감작제(SEN)의 경고주석과 발암성을 표기하기에는 유용한 자료가 충분하지 않다.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.26 no.3
• /
• pp.95-100
• /
• 2016

In this work, tin oxides were obtained by the liquid reduction precipitation method and hydrothermal process using $SnCl_2{\cdot}2H_2O$, $N_2H_4$, and NaOH. Tin oxide crystals having different sizes and morphologies could be achieved. The powders were characterized by X-ray diffraction (XRD) and Field Emission Scanning Electron Microscopy (FE-SEM). Depending on the molar ratio of the raw materials, tin oxide crystalline with the spherical and rectangular plate-like shape could be obtained, the crystal phase was SnO and $Sn_6O_4(OH)_4$. And the obtained SnO crystals by a hydrothermal reaction showed various shapes, such as, spherical, plate-like and flower-like architectures depending on the temperature conditions.

• Journal of the Korean Chemical Society
• /
• v.25 no.2
• /
• pp.127-129
• /
• 1981

• Resources Recycling
• /
• v.17 no.6
• /
• pp.79-88
• /
• 2008

This study is the previous stage for the mass production technology development of the nano-sized tin oxide powder by the recycling of the wasted tin metal, and nano-sized tin oxide powder with the average particle size below 50 nm is prepared from the tin chloride solution by the spray pyrolysis process. As the reaction temperature increases from 800 to 850, the average particle size of the generated powder increases from 20 to 30 nm. As the reaction temperature increases to 900, the droplet type is composed of the particles with the average size of the 30 nm. while the average size of the independent particles increases up to $80{\sim}100$ nm and the surface microstructure becomes more solid. Until $900^{\circ}C$, as the reaction temperature increases, the XRD peak intensity increases, while the specific surface area decreases. When the reaction temperature increases to 950, most of the powder appears with the independent type and the average particle size decrease down to 70 nm. The XRD peak intensity greatly decreases and the specific surface area increases almost twice.