• Textile Coloration and Finishing
• /
• v.8 no.5
• /
• pp.49-67
• /
• 1996

이 연구의 목적은 에틸렌이민 유도체를 갖는 아조계 분산 염료의 나일론 6.6 섬유에의 응용과 최적화된 나일론 염색 조건의 확립이다. 두 쌍의 염료 A-1/A-2와 D-1/D-2의 최대흡수파장(&{\lambda}_{max}&)을 비교할 경우, 아세톤 최대흡수파장(λ$_{max}$)의 차이가 없거나 적어졌다. 세가지 아지리디닐 모노 아조 염료와 이들 염료의 가수분해 된 형태 그리고 디메닐아닐린계 아조 염료의 나일론 6.6 섬유에 대한 염색 및 견뢰도 성질이 조사되었다. 아지리디닐 염료의 나일론 섬유상의 최대 염착은 pH 5에서 얻어졌으며, 염색된 나일론 섬유에서의 용매추출의 경우 최소 염료 추출은 pH 8.0-10.0 에서 얻어졌다. 아지리디닐 염료 염색된 나일론 섬유상의 세탁 견뢰도와 광 견뢰도는 염색 시 pH의 증가에 따라 증가하였으나, pH 8에서의 견뢰도 성질이 pH 10에서와 비교하여 보다 개선되었다. 세가지 아지리디닐 염료가 이들 염료의 가수분해 된 형태 그리고 디메틸아닐린계 아조 염료와 비교해서 나일론 6.6 섬유상에서 보다 개선된 견뢰도를 나타내었고 이는 염료와 섬유간의 공유 결합으로 기인한 것으로 여겨진다.

• Textile Coloration and Finishing
• /
• v.6 no.1
• /
• pp.8-18
• /
• 1994

In one bath dyeing system of silk/cellulose acetate fiber blend fabric with acid /disperse dyes, adsorption behavior of acid dyes and disperse dyes on silk and cellulose acetate fabrics were examined. In the dyeing of cellulose acetate with C. I. Disperse Red 19(Red 19) and C. I. Disperse Red 60(Red 60) at 8$0^{\circ}C$ and 10$0^{\circ}C$, dye uptake with Red 19 was higher than that with Red 60. When the silk/cellulose acetate dyed with Red 19 and Red 60 at 10$0^{\circ}C$, dye uptake on cellulose acetate was influenced by affinity of the dye to the silk fabric dyed together. When the silk/cellulose acetate dyed with Blue 80/Red 19 and Blue 80/Red 60 at 10$0^{\circ}C$, color of cellulose acetate dyed with Red 19 and Red 60 was not influenced by Blue 80 but silk dyed with Blue 80 was influenced by Red 19 and Red 60. Interrelation of K/S value and Munsell value was scarcely any but showed the change tendency of K/S value.

• Textile Coloration and Finishing
• /
• v.19 no.3
• /
• pp.12-17
• /
• 2007

In this study, we have investigated properties and behaviors of the indigo vat dyeings on synthetic fibers, namely PET and PTT/Spandex. In addition, indigo vat dyeing conditions such as dyeing temperature, dye concentration and pH were optimized. The finding results show that higher color strengths of indigo dyeings on the two types of applied fibers were obtained at $110^{\circ}C$ and $90^{\circ}C$, respectively. Furthermore, acid leuco dyeings on the fiber substrates using acetic acid and formic acid show higher dye uptake with compared to alkali leuco counterparts.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.28 no.12 s.138
• /
• pp.1625-1631
• /
• 2004

The purpose of this study was to investigate dyeing properties of cotton fabrics by American fleabane extract. Effect of dyeing condition on dye uptake and effect of mordanting on dye uptake, color change and colorfastness were explored. Its affinity to cotton fiber was considerably lower than wool, and its hydrogen bonding was involved in the absorption of American fleabane colorants to cotton fiber. K/S value of pre­mordanting was higher than sim-mordanting or post-mordanting. Except that Sn mordanted showed high K/S value, it did not significantly increase. American fleabane produced mainly yellowish color on mordants and mordanting method. Cotton fabrics showed generally high colorfastness except colorfastness to washing.

• Textile Coloration and Finishing
• /
• v.18 no.4
• /
• pp.43-48
• /
• 2006

A phthalocyanine reactive dye was applied to nylon fibers to study the effects of the temperature and pH on % exhaustion and fixation. In addition, appropriate predictable empirical models, relatively new approaches in dyeing process, were developed incorporating interactions effects of temperature and pH for predicting the both % exhaustion and fixation. The significance of the mathematical model developed was ascertained using Excel regression (solver) analysis module. A very high correlation coefficient was obtained ($R^2=0.9895$ for % exhaustion, $R^2=0.9932$ for fixation) for the model which shows prominent prediction capacity of the model for the unknown conditions. The predictable polynomial equations developed from the Experimental results were thoroughly analyzed by ANOVA (Analysis of Variance) statistical concepts.

• Journal of Sericultural and Entomological Science
• /
• v.48 no.2
• /
• pp.46-55
• /
• 2006

In this thesis, we took some stalks, flowers, and leaves of the Serratuls coronate var. insularis which are able to propagate as mass n our wild to extract the dyeing solution, and cotton and silk were dyed using them in many different conditions. Silk was dyed darker than cotton. We found there was not a big difference between silk and cotton in the given condition considering 'Y' values vs. dyeing temperature. There was a rapid decreasing of 'Y' values after one to two hours and almost all of dyeing was completed at these times. We found there was a dyeing acceleration at the higher dyeing density and the lower 'Y' value. If the density was low, dyeing attachment was reduced by dyeing ability via the density of liquid in both plants. Silk was affected higher by mordant dyes in both plants. Fe and Cu had an effect by mordant dyes slightly an Serratuls coronate var. insularis.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.41 no.5
• /
• pp.914-928
• /
• 2017

This research investigated the effect of pH of dyebath and dyeing temperature on the dyeability of indigotin and indirubin on silk as well as the relationship between the amount of indigotin and indirubin detected from the dyed silk through HPLC-DAD analysis and the color of samples measured using a spectro-colorimeter. Indigo standard dye and indirubin standard dye were deliberately mixed by ratios 100:0, 80:20, 60:40, 40:60, 20:80, and 0:100 to dye silk with a different pH of dyebath (7, 11) and different dyeing temperatures ($50^{\circ}C$, $70^{\circ}C$). The amount of indigotin and indirubin pigments in silk was calculated using regression equations obtained from standard calibration curves of indigotin and indirubin. A higher indigotin percent ratio resulted in the higher K/S values and the higher amount of indigotin detected from silk. However, higher indirubin percent ratio in the mixed dye did not relate to the higher indirubin pigment detected in silk. While indirubin showed low or negative contribution to the K/S values, it showed a higher effect on the color of dyed silk. Higher amounts of indirubin in dyed silk resulted in a darker PB color, which led to P color with increases in indirubin content.

• Textile Coloration and Finishing
• /
• v.17 no.2 s.81
• /
• pp.10-18
• /
• 2005

Silk fabrics mordanted with $Fe^{2+},\;Ni^{2+},\;and\;Cu^{2+}$ were dyed with the aqueous extract of Cassia tora L. seed which was known to include water soluble colorant kaempferol, one of flavonol compounds. Kaempferol can react with free radicals and chelate transition metal ions, which is thought to catalyze processes leading to the appearance of free radicals and have antioxidant activity. In relation to the coordinating and chelating mechanism of the ions with the silk protein and kaempferol, reasonable conclusions should be made on the colorant uptake and the water fastness of the fabric. The amount of the colorant on the fabric was in the order of $Fe^{2+}>Ni^{2+}>Cu^{2+}$. In case of dyeing through coordinaiton bonds between transition metal ions and silk protein and colorants, it was thought that the ions with the smaller secondary hydration shell, the higher preference to the atoms of the ligand coordinated, and the suitable bonding stability for the substitution of primarily hydrated water molecules for colorants led to the higher colorant uptake. The water fastnsess of the fabric was in the order of $Fe^{2+}>Cu^{2+}>Ni^{2+}$. It should be reasonable to choose transition metal ions with weak and strong tendency to the ionic and the coordination bond, respectively, to the carboxylate anion of the silk protein. Although further research needs to be done, the conclusions above may be generally applied to the natural dyeing through the coordination bond mechanism between transition metal ions and colorants and substrates.

• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2012.03a
• /
• pp.86-86
• /
• 2012

고속방사소재는 연신공정이 없이 6,000m/min이상의 고속방사공정만이 있으므로 원가절감이 되고, 빠른 냉각, 높은 변형속도 등으로 섬유의 결정화도, 분자와 결정의 배향 및 모폴로지(morphology) 변화 등의 기계적 및 섬유상의 특성이 종래의 원사와는 다르게 된다. 방사속도가 증가함에 따라 배향도가 증가하면서 결정영역 또한 증가한다. 또한 기존 연신사에 비해 큰 결정크기를 갖는데 방사속도에 에 따른 방사응력의 증가가 응력유도 결정화도를 유발하여 결정크기 및 결정화도를 증가시키고,따라서 고분자의 용융점도를 고온측으로 이동시키는 현상을 나타내게 한다. 즉, 고속방사에 있어서는 연신에 필요한 임계응력 이상의 과도한 응력이 가해짐으로 인해 결정구조가 일반 연신사에 비해 현저히 발달한다는 것을 알 수 있다. 고속방사 원사를 통일한 조건으로 염색하는 경우 기존의 연신사보다 염착량이 많아 농색으로 염색이 가능하고 염착속도도 빠른 특징을 갖는 데이는 고속방사 원사의 비결정 배향이 낮고 느슨한 구조를 갖기 때문에 염료의 침투가 용이한 것으로 해석되고 있다. PET 섬유는 방사 후 형태안정성을 부여하기 위해서 염색 전처리 공정에서 열을 가하게 된다. 이런 과정에서 섬유의 미세구조가 변하게 되는데,특히 고속방사의 경우 섬유 형성과정이 연신사와는 다르므로 열에 의한 구조 변화와 이에 따른 염색성 변화에 대해 검토해 보는 것은 고속방사의 응용면에서 꼭 필요하다. 본 연구에서는 고속방사소재의 가장 단점인 잔류신도, 저수축현상, stiff감을 보완하면서 고속방사소재의 장점인 심색성을 부각시켜 차별화된 복합사 제조기술을 개발하기 위해 그 기술개발이 기초 연구로서 일반 일반 DTY사와 고속방사소재인 HOY사를 이용한 DTY사의 물성 및 염색 특성을 비교분석 하고자 한다.

• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2012.03a
• /
• pp.49-49
• /
• 2012

바닥재 자카드직물에 사용이 예상되는 LMP(low meltig polyester) 복합사는 사염 시 높은 수축율 및 열융착의 가능성 때문에 일반적인 폴리에스테르의 염색조건에서는 염색이 불가하다. 따라서 적정의 수축율 내에서 가능한 염색조건에 대해 고찰하였다. LMP 복합사는 웅진케미컬에서 생산된 Regular PET/LMP(75:25) 260d/48f 원사를 사용하였다. 수축율은 KS K 0215에 준하여 측정하였다. 염색은 E-type 및 S-type(Foron Dark Blue S-WF) 분산염료를 사용하였으며, E-type 중에서는 아조계(Lumacron Blue SERL 200%) 와 안트라퀴논계(Foron Blue E-BL 150)의 2 종류를 사용하였다. 염색된 시료는 현미경 단면사진을 이용하여 염료의 내부확산을 확인하였으며, 환원세정 전후의 K/S 값을 측정하였다. LMP원사의 수축율을 시험한 결과 $90^{\circ}C$에서 9% 정도의 수축율을 나타내어, $90^{\circ}C$ 이상에서는 사염이 어려운 것으로 나타났다. 따라서 염색온도는 $80^{\circ}C$와 $90^{\circ}C$로 하였다. S-type의 염료를 이용한 경우 $90^{\circ}C$에서 4일 이상 염색해도 염착이 이루어지지 않아 대상 염료에서 제외하였다. E-type 염료인 경우 아조계는 흡진율은 높았으나 내부 regular PET에의 확산이 매우 느리고, 안트라퀴논계는 상대적으로 확산이 빠른 것으로 나타났다. 안트라퀴논계 분산염료는 $80^{\circ}C$에서 내부로의 확산에 4일 이상이 소요되며, $90^{\circ}C$에서는 2일 이상이 소요되었다. 이 후 환원세정에 의한 K/S 값의 변화 및 마찰견뢰도를 시험하였으며, 환원세정 후의 섬유단면 사진을 통해 염료의 migration성을 평가하였다.