• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2019.11a
• /
• pp.65-67
• /
• 2019

해양활동의 급속한 확대로 해마다 발생하는 해양사고의 발생이 증가하고 있으며, 사상자 수도 비례적으로 증가하고 있다. 이러한 사고를 줄이기 위해서, 다양한 구조 요청 기기가 개발되고 제시되되어 왔으나 단일화 되지 못한 통신 방법, 구조 요청 과정에 대한 사용자의 인식 부족으로 실질적인 구조 요청 장치의 사용율이 지극히 낮다. 또한 해양의 특수성으로 인하여 제시되어온 기기를 이용하기 위해서는 큰 비용이 소요되었다. 이에 따라 실질적인 구조 가능성을 높이고 해양사고로 인한 사상자를 최소화하기 위해 본 연구의 목적은 실험평가와 경험적 공식을 바탕으로 일반 사용자가 손쉽게 접근 가능한 안드로이드 애플리케이션과 연결된 자동 구조 요청 장치를 개발한 것으로, 본 연구는 현장 및 실험실 시험의 결과에 근거하여, MOB 구출을 위한 자동 구조 요청 장치의 사양을 확정 검증하는 실용화 연구를 수행하였다.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2006.11a
• /
• pp.433-436
• /
• 2006

유비쿼터스는 간단히 말해서 많은 센서 들로 이루어진 무선 센서 네트워크이며 해양 환경 감시 서비스는 해양에 센서들을 설치함으로써 유비쿼터스 환경을 구축하고 해양 환경 변화를 감시한다. 센서 노드들로부터 수온, 기온, 염도 등을 센서 데이터들이 측정이 되며 이러한 데이터를 기반으로 유용한 지식을 탐사해낸다. 그러나 기존의 데이터 마이닝 기법은 이력 데이터에 대해서 마이닝 기법을 적용하지만 센서 데이터들은 아주 빠른 속도로 대량으로 유입이 되기 때문에 기존의 데이터 마이닝 기법은 적용이 불가능하게 된다. 그러므로 센서 데이터에 맞는 새로운 센서 데이터 마이닝 기법이 필요하다. 본 논문에서는 센싱된 센서 데이터들을 기반으로 해양 환경 감시 서비스에 제공할 수 있는 센서 마이닝 기법들을 제안한다.

• Journal of the Korean Geotechnical Society
• /
• v.28 no.12
• /
• pp.87-98
• /
• 2012

A sonar sensor system of a new socket roughness profiling system (SRPS) which can measure the socket roughness of the large-diameter drilled shafts under the in-situ condition was developed and verified. In model tests, the salinity, temperature, and high-turbidity have been changed for simulating the in-situ borehole water conditions. From the test results, it was found that the sonar sensor can measure the distance within an accuracy of 1mm. Because of the wave form characteristics of sonar sensor, the relative error exists in case of the inclined and curved surface, however, the shape of specimen was confirmed relatively exactly using the developed sonar sensor. Moreover, the salinity, temperature, and high-turbidity did not affect the measured data of socket roughness.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.13 no.1
• /
• pp.109-114
• /
• 2013

In underwater wireless sensor networks, sensing data such temperature and salinity can be merged by averaging them. Data aggregation is a good choice to reduce the amount of packets and save energy in underwater wireless sensor networks. However, data aggregation could bring about packet delay and non-directional transmission to the sink. In this paper, we propose a new path building algorithm based on data aggregation to mitigate these problems. The paper reduces the delay without wireless interferences and maximizes the energy efficiency by removing the non-directional transmission to the sink. Experimental results show that the proposed algorithm outperforms in terms of the energy efficiency and the packet delay.

• Korean Journal of Food Science and Technology
• /
• v.53 no.4
• /
• pp.375-381
• /
• 2021

This study investigated the physicochemical properties and chemosensory characteristics of radish samples. Brix results in Matdong-radish showed the highest value (1.5±0.1%), and Mansahyungtong-radish showed the lowest. In terms of salinity, Mansahyungtong-radish had the highest value (1.2±0.1%), and there were no significant differences among samples except Mansahyungtong-radish. In pH analysis, Cheongjunggowon-radish had the highest value at 6.69±0.02. The pH in Mansahyungtong-radish showed the lowest value at 6.10±0.01. In the electronic tongue, sourness was high in the Seoho-radish (8.2), and saltiness was high in the Matdong-radish (8.1). Umami was high in the Seoho-radish (8.3), and sweetness was high in the Matdong-radish (8.1). In the electronic nose, sulfur-containing compounds were high in all the samples. Methanethiol, which represented the odor description of cabbage, garlic, and sulfurous, was abundant in sulfur-containing compounds. Multivariate analysis using physicochemical and chemosensory properties can be used as a database for the food industry.

• Journal of Sensor Science and Technology
• /
• v.5 no.3
• /
• pp.75-85
• /
• 1996

Real time water quality monitoring system in a large area has been developed. The system is hierarchically composed of CCMS(Central Control and Monitoring System), data loggers and water pollution measuring instruments, which enable systematic and efficient data collection and management. Also in this work we designed and constructed the instruments for measuring basic elements in water quality such as salinity, electrical conductivity, temperature, dissolved oxygen and the amount of coli in water.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.7 no.4
• /
• pp.187-191
• /
• 2012

In these days, there are huge increases of concerning underwater acoustic sensor networks (UWASNs) to explore marine resources and to monitor climate change. To collect information from sensor nodes which are randomly deployed in underwater, Multi-Dimensional Scaling (MDS) based locating methods have been recently introduced, which consider sound speed to be constant in underwater. However, underwater sound speed tends to vary depending on underwater environment factors, such as depth, temperature, and salinity. In this paper, we propose a method considering environment factors, can influence upon sound speed in underwater, and introduce experimental setup which can follow up environmental factors.

• Journal of Sensor Science and Technology
• /
• v.30 no.3
• /
• pp.154-164
• /
• 2021

In this study, the IoT sensor technology required for improving the survival rate and high-density productivity of individual shrimp in smart shrimp farming (which involves the usage of recirculating aquaculture systems and biofloc technology) was analyzed. The principles and performances of domestic and overseas water quality monitoring IoT sensors were compared. Furthermore, the drawbacks of existing aquaculture monitoring technologies and the countermeasures for future aquaculture monitoring technologies were examined. In particular, for farming white-legged shrimp, an IoT sensor was employed to collect measurement indicators for managing the water quality environment in real-time, and the IoT sensor-based real-time monitoring technology was then analyzed for implementing the optimal farming environment. The results obtained from this study can potentially contribute to the realization of an autonomous farming platform that can improve the survival rate and productivity of shrimp, achieve feed reduction, improve the water quality environment, and save energy.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2021.05a
• /
• pp.178-180
• /
• 2021

In this paper, we design a system to monitor environmental data in fish farms in real-time and provide machine learning-based prediction services to prevent damage on fish farms caused by changes in the sea environment. The proposed system will install an IoT device module consisting of sensors that can measure hydrogen concentration, salinity, dissolved oxygen, and water temperature, which can be transferred to Cloud DB using LTE or LoRa communication technology and then monitor the real-time condition through a web or mobile application. In addition, it has a function to prepare for changes within the environment of fish farms by applying machine learning-based prediction technology using collected data.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.26 no.5
• /
• pp.743-754
• /
• 2022

This paper contains the results of the development and performance evaluation of the environmental data monitoring system for the fish farm. For the hardware development, the analogue sensor is used to collect dissolved oxygen, pH, salinity, and temperature of the fish farm water, and the digital sensor is used for collecting ambient temperature, humidity, and location information via a GPS module to be sent to cloud-based Firebase DB. A set of LoRa transmitters and receivers is used as a communication module to upload the collected data. The data stored in Firebase is retrieved as a graph on a web and mobile application to monitor the environmental data changes in real-time. A notification will be delivered if the collected data is outside the determined optimal value. To evaluate the performance of the developed system, a response time from hardware modules to web and mobile applications is ranging from 6.2 to 6.85 seconds, which indicates satisfactory results.