• The Journal of the Acoustical Society of Korea
• /
• v.22 no.6
• /
• pp.457-462
• /
• 2003

In this paper, we propose a speaker pruning method for real-time processing and improving performance of speaker identification system based on GMM(Gaussian Mixture Model). Conventional speaker identification methods, such as ML (Maximum Likelihood), WMR(weighting Model Rank), and MWMR(Modified WMR) we that frame likelihoods are calculated using the whole frames of each input speech and all of the speaker models and then a speaker having the biggest accumulated likelihood is selected. However, in these methods, calculation cost and processing time become larger as the increase of the number of input frames and speakers. To solve this problem in the proposed method, only a part of speaker models that have higher likelihood are selected using only a part of input frames, and identified speaker is decided from evaluating the selected speaker models. In this method, fm can be applied for improving the identification performance in speaker identification even the number of speakers is changed. In several experiments, the proposed method showed a reduction of 65% on calculation cost and an increase of 2% on identification rate than conventional methods. These results means that the proposed method can be applied effectively for a real-time processing and for improvement of performance in speaker identification.

• The Journal of the Acoustical Society of Korea
• /
• v.36 no.4
• /
• pp.254-260
• /
• 2017

The purpose of this study is to evaluate the sound absorption characteristics of a human body according to the amount of clothing worn by using reverberation method measurement method for developing standard test dummy, which can be used for testing absorption of occupied audience chair. Test method was based on the previous study (Conti et al., 2004), each experiment is conducted in the reverberation room and a subject wearing clothes is standing in that chamber. In this experiment, the sound absorption area of each frequency band according to the wearing of various material clothing was measured. As a result of measurements, the average sound absorption area of the whole frequency band was $0.25m^2-0.48m^2$ in case of a subject not wearing outer clothes, and $0.38m^2-0.98m^2$ in case of wearing of outerwear. Polyester tops by showing the maximum value, the highest characteristics in the 800 Hz to 1 kHz band among the rest of fiber materials. The outer jacket made of the wool and cotton materials show a higher absorption area as the frequency increases to the higher frequency band. The change of the sound absorption area according to the clothing amount was divided by the thermal resistance (clo) of the worn clothes and the weight per body surface area.

• Proceedings of the Acoustical Society of Korea Conference
• /
• spring
• /
• pp.115-118
• /
• 2002

Parameters used in a speaker recognition system are desirable expressing speaker's characteristics filly and have in a speech. That is to say, if inter-speaker than intra-speaker variance a big characteristic, it is useful to distinguish between speakers. Also, to make minimum error between speakers, it is required the improved recognition technology as well as the distinguishing characteristics. When we see the result of recent simulation performance, we obtain more exact performance by using dynamic characteristics and constant characteristics by a speaking habit. Therefore we suggest it to solve this problem as followings. The prosodic information is used by a characteristic vector of speech. Characteristics vector generally using in speaker recognition system is a modeling spectrum information and is working for a high performance in non-noise circumstance. However, it is found a problem that characteristic vector is distorted in noise circumstance and it makes a reduction of recognition rate. In this paper, we change pitch line divided by segment which can estimate a dynamic characteristic and it is used as a recognition characteristic. we confirmed that the dynamic characteristic is very robust in noise circumstance with a simulation. We make a decision of acceptance or rejection by comparing test pattern and recognition rate using the proposed algorithm has more improvement than using spectrum and prosodic information. Especially stational recognition rate can be obtained in noise circumstance through the simulation.

• Journal of the Korean Wood Science and Technology
• /
• v.36 no.3
• /
• pp.70-84
• /
• 2008

A series of the studies on the applied physical properties of domestic species have been conducted last three years. Pinus densiflora was one of the three species examined for the first year. Because the same apparatus and experimental procedures were used for all species, their results can be easily comparable. The experiments for sorption property were conducted with 20- and 80-mesh wood powder and resulted in their EMC's and sorption isotherms at various heating conditions. The thermal conductivity and diffusivity, and electric resistance and volumetric electric resistivity were measured with a thermal-wire device and a high electric resistance meter. The differences of the thermal and electric properties between quarter- and flat-sawn specimens were observed, which was partially attributed to their anatomical differences. An acoustic measurement system was used to evaluate dynamic MOE and internal friction. This paper provides the useful fundamental data for designing a wood structure, correcting a portable resistance-type moisture meter, and nondestructive testing wood.

• The Journal of the Acoustical Society of Korea
• /
• v.41 no.4
• /
• pp.435-445
• /
• 2022

In this study, the reverberation of a bistatic sonar operated in southeastern coast in the East Sea in July 2020 was analyzed. The reverberation sensor data were collected through an LFM sound source towed by a research vessel and a horizontal line array receiver 1 km to 5 km away from it. The reverberation sensor data was analyzed by various methods including geo-plot after signal processing. Through this, it was confirmed that the angle reflected from the sound source through the scatterer to the receiver has a dominant influence on the distribution of the reverberation sound, and the probability distribution characteristics of bistatic sonar reverberation varies for each beam. In addition, parametric factors of K distribution and Rayleigh distribution were estimated from the sample through moment method estimation. Using the Kolmogorov-Smirnov test at the confidence level of 0.05, the distribution probability of the data was analyzed. As a result, it could be observed that the reverberation follows a Rayleigh probability distribution, and it could be estimated that this was the effect of a low reverberation to noise ratio.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.23 no.4
• /
• pp.334-341
• /
• 2003

When the pressure tubes(f are in contact with the calandria tube(CT) in the pressurized heavy water reactor(PHWR), the temperature difference between inner and outer wall of W results in a thermal diffusion of hydrogen (deuterium) and hydride blisters are formed on the outer surface of PT. Because the hydride blisters and zirconium matrix are acoustically continuous, it is not easy to distinguish the blisters from the matrix with conventional ultrasonic method. An ultrasonic velocity ratio method was developed to detect small hydride blisters on the zirconium pressure tube. Hydride blisters were grown in the PT specimen using a steady state thermal diffusion device. The flight times of longitudinal echo and reflected shear echo from the outer surface were measured accurately. The velocity ratio of the longitudinal wave to the shear wave was calculated and displayed using contour plot. Compared to the conventional flight time method of longitudinal wave, the velocity ratio method shows superior sensitivity to detect smaller blisters as well as better images for the blister shapes. Detectable limit of the outer shape of the hydride blisters was conservatively estimated as $500{\mu}m$, with the same specifications of ultrasonic transducer used in the actual PHWR pressure tube inspection.

• Composites Research
• /
• v.30 no.4
• /
• pp.241-246
• /
• 2017

The brittle nature in most FRP composites is accompanying other forms of energy absorption mechanisms such as fibre-matrix interface debonding and ply delamination. It could play an important role on the energy absorption capability of composite structures. To solve the brittle nature, the adhesion between pines and composites was studied. Thermal treated pines were attached on carbon fiber reinforced polymer (CFRP) by epoxy adhesives. To find the optimum condition of thermal treatment for pine, two different thermal treatments at 160 and $200^{\circ}C$ were compared to the neat case. To evaluate mechanical and interfacial properties of pines and pine/CFRP composites, tensile, lap shear and Izod test were carried out. The bonding force of pine grains was measured by tensile test at transverse direction and the elastic wave from fracture of pines was analyzed. The mechanical, interfacial properties and bonding force at $160^{\circ}C$ treated pine were highest due to the reinforced effect of pine. However, excessive thermal treatment resulted in the degradation of hemicellulose and leads to the deterioration in mechanical and interfacial properties.

• Proceedings of the Optical Society of Korea Conference
• /
• 2000.02a
• /
• pp.288-289
• /
• 2000

SBN, BSKNN KNSBN 등의 tungsten-bronze 계열에 속하는 광굴절 결정은 짧은 파장에서 좋은 감광도와 빠른 응답시간을 갖는다. 이중에서도 KNSBN 결정은 큰 크기의 결정 성장 및 도핑이 용이하고 광굴절 결정에서 중요한 특성 중 하나인 열 안정성(thermal stability)이 좋기 때문에 빠른 응답특성이 요구되는 응용분야에서 촉망받는 매질이다. 본 논문에서는 광정보저장, 광정보처리, 광컴퓨터, 광통신과 같은 다양한 분야에서 응용가능성을 가지는 Cu가 0.04wt.%도핑된 5mm$\times$5mm$\times$5mm 크기의 KNSBN 결정을 이용한 광신호의 증폭기술에 대하여 연구하였다. 먼저 Cu-KNSNB 결정의 2광파 결합 특성을 분석하기 위하여, 기록 파장에 따른 지수이득계수의 외부입사각의존성, 최대 지수이득계수를 나타내는 외부입사각에서 입사빔의 세기비에 따른 2광파 결합 이득을 측정하였다. 또한, 632.8nm파장 영역에서 기록 및 삭제시간 상수, 회절 효율의 입사빔 세기비 의존성을 측정하였다. 그리고, 음향-광학 변조기(AOM: acousto-optic modulator)에 의해 진폭 변조된 신호빔을 이용하여 광신호 증폭특성을 분석하고 그 결과를 제시하였다. 이때 두 빔의 입사각은 최대 지수이득계수를 나타내는 입사반각 12$^{\circ}$로 고정하고, 감쇄기를 이용하여 신호빔의 세기를 조절하면서 신호빔의 차동이득을 측정하였다. 투과된 신호빔은 같은 주파수에서 차동 이득(diffrerential gain)을 보였으며, 이는 moving grating과 시간-변조된 신호빔(또는 펌프빔)사이의 새로운 상호작용은 광굴절 결정의 시간 적분 특성에 의한 것이다. (중략) 경우는 상온에서 펌프 펄스의 유지시간이 0.5% 인 경우 레이저가 동작하는 것을 보여주었다. 이는 구조내에서 열전도가 문제가 된다는 것을 의미하는데 위아래가 공기로 둘러 싸여 있어 발생한 열이 가는 유전체 네트웍을 통해서만 전달 될 수 있기 때문이다. (중략)$^4$A$_2$에 의한 nophonon line R$_1$, R$_2$(680.4, 678.5 nm) 및 $^2$T$_1$$\longrightarrow$$^4$A$_2$(655.7, 649.3, 645.2 nm)의 형광방출 스펙트럼을 얻었으며, 형광수명은 0.264 ms로 조사되었다. 제조된 레이저 발진봉은 직경 6.3 m, 길이 45 nm이었다.\pm$0.06kHz Ge $F_4$; -1.84$\pm$0.04kHz$0.04kHz/TEX>0.04kHz 모국어 및 관련 외국어의 음운규칙만 알면 어느 학습대상 외국어에라도 적용할 수 있는 보편성을 지니는 것으로 사료된다.없다. 그렇다면 겹의문사를 [-wh]의리를 지 닌 의문사의 병렬로 분석할 수 없다. 예를 들어 누구누구를 [주구-이-ν가] [누구누구-이- ν가]로부터 생성되었다고 볼 수 없다. 그러므로 [-wh] 겹의문사는 복수 의미를 지닐 수 없 다. 그러면 단수 의미는 어떻게 생성되는가\ulcorner 본 논문에서는 표면적 형태에도 불구하고 [-wh]의미의 겹의문사는 병렬적 관계의 합성어가 아니라 내부구조를 지니지 않은 단순한 단어(minimal $X^{0}$ elements)로 가정한다.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.20 no.3
• /
• pp.78-86
• /
• 2016

In this paper we propose a new frame transfer function model describing the variations of a heat release rate in response to an external flow oscillation in gas turbine systems. A critical difference of our model compared to the so-called $n-{\tau}$ model which has been widely used for a prediction of combustion instability (CI), is that our model is able to describe a nonlinear relation between phase and frequency. In contrast, the phase part of the $n-{\tau}$ model is a pure time delay and thus the phase should be a linear function of frequency, which is inconsistent with many experimental results of real combustion systems. For an illustration, our new model is applied to experimental data and the effect of phase nonlinearity is investigated in the context of combustion instability.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• v.y2005m4
• /
• pp.274-280
• /
• 2005

Experimental investigations were carried out in an atmospheric pressure, optically accessible and laboratory-scale dump combustor. The objective of this study is to obtain the phase-resolved gas temperatures at different phases of the oscillating pressure cycle during unstable combustion. To see the effect of incomplete fuel-air mixing on phase-resolved temperature characteristics, CARS temperature measurements were performed. Results including phase-resolved averaged temperature, normalized standard deviation and temperature probability distribution functions (PDFs) were provided in this paper. It could be found that the profile of mean temperature showed the in-phase relationship with pressure cycle. Temperature PDFs give an insight on the flame behavior as well as NOx emission characteristics. These results would be expected to play an important role in better understanding of driving mechanisms and thermo-acoustic interactions.