• 한국음향학회:학술대회논문집
• /
• 한국음향학회 2000년도 하계학술발표대회 논문집 제19권 1호
• /
• pp.417-420
• /
• 2000

점진적 영상 전송과 저해상도에서도 높은 PSNR를 나타내는 방법으로 EZW(Enbeded Zerotree Wavelet)과 SPIHT(set partitioning in hierarchical tree)를 사용한 보다 향상된 영상 압축방법이 제안되어졌다. 특히 SPIHT는 적응 산술부호화(adaptive arithmetic coding)를 사용하지 않고도 EZW보다 뛰어난 압축률과 효과를 얻을 수 있다. 하지만 부대역(subband)간의 유사성(similarity)을 이용한 제로트리 부호화에서 계층을 나누는 일은 계수 사이의 연결관계를 깰 수 있기 때문에 간단한 일은 아니다. 본 논문에서는 SPIHT의 비트열을 여러개의 계층으로 나누고 각각의 해상도로 복원하는 새로운 정렬 방법을 제안하고, 계층간의 비트열을 균일하게 나눔으로써 보다 효율적으로 전송 할 수 있는 방법을 제안하였다. 또한 복호시에 낮은 해상도일수로 복원시간의 이득을 볼 수 있는 향상된 방법을 제안한다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 추계학술대회
• /
• pp.1166-1171
• /
• 2004

The combustion instability acts as a serious obstacle for the lean premixed combustion of gas turbine and even causes the fatal damage to the combustor and whole system. In this experiment, the pressure fluctuation is highly related to the stabilizing position of flame and fuel injection location. The fuel injection location is connected with the convection time of the fresh mixture, which is important time scale to refresh the mixtures near the flame stabilization location. The flame is extremely unstable when the alternative stabilization occurs and bulk mode frequency (${\sim}10Hz$) of pressure fluctuation is observed in this condition. It was found that the convection time scale of the fresh reactant coincided with the time scale of the bulk mode fluctuation. Hence this phenomenon results from the local equivalence ratio change caused by the pressure fluctuation induced by thermo-acoustic effects.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2006년도 추계학술대회논문집
• /
• pp.235-238
• /
• 2006

For high-speed aircraft and high-speed civil transport planes, certain structural skin components are subjected to very large acoustic loads in an elevated thermal environment. In this study, we used the single-mode Fokker-Panck distribution to predict displacements of isotropic plates subject to thermo-acoustic combined load. The single mode was formulated to predict the nonlinear dynamic responses of postbuckled plates under acoustic random excitation. Acoustic random excitation was used with Gauss distribution. Some important effects of the snap-through motion on the dynamic responses of the postbuckled plates are described.

• 한국음향학회:학술대회논문집
• /
• 한국음향학회 1998년도 학술발표대회 논문집 제17권 1호
• /
• pp.107-110
• /
• 1998

본 논문은 DTW(Dynamic Time Warping)을 이용한 음성인식에서 표준패턴(reference patterns)으로 사용되는 벡터열을 GA(Genetic Algorithm)을 이용하여 보다 적응된 패턴의 벡터열로 생성하는 방법을 제시한다. 본 논문의 필요성은 다음과 같다. 음성인식의 주요한 엔진들 중에 하나로 DTW가 사용된다[1]. DTW는 표준패턴과 시험패턴(test patterns)간의 최적 경로(optimal path)를 찾아내어 가장 유사한 패턴을 찾아내는 방법을 말한다. 그러나 음성은 같은 발음에 대해서도 사람의 발성 길이와 목의 상태 등에 따라 다양한 패턴으로 나타나며 동일 화자의 같은 어휘도 시간과 환경에 따라 변한다. 따라서 이러한 음성의 동적 특성에 적응하는 방법이 필요하다. 본 논문은 이러한 문제에 대한 해결 방법으로 GA를 이용하여 보다 적합하고 적응적인 표준 패턴을 생성시켜 적응하는 방법을 개발하였다.

• 한국연소학회지
• /
• 제17권2호
• /
• pp.17-23
• /
• 2012

In this study, thermoacoustic analysis model was developed in order to predict both eigenfrequencies and initial growth rate of combustion instabilities for lean premixed gas turbine combustors. As a first step, a model combustor and nozzle were selected and analytical linear equations for thermoacoustic waves were derived for a given combustion system. Then, methods showing how the equations can be used for analysis of the combustion instability were suggested. It was found that the prediction results showed a good agreement with the measurements. However, there were some limitation in growth rate predictions, which were related with over-simplification of flame structure, acoustic boundary conditions, and temperature distribution in the combustor.

• 한국음향학회:학술대회논문집
• /
• 한국음향학회 1998년도 학술발표대회 논문집 제17권 2호
• /
• pp.207-210
• /
• 1998

기존의 DPCM에 의한 압축방법은 예측오차를 양자화하여 전송한 후 복원하는 것으로 8레벨로 양자화하는 경우 3bpp의 비트율을 갖는다. 본 논문에서는 화소값의 압축에 의해 기존의 DPCM보다 예측오차값의 분포를 0을 중심으로 더 집중시킴으로써 더 낮은 비트율을 갖는 압축방법을 제안한다. 압축된 각 화소의 예측오차값은 DPAM방법에 의해 8-레벨로 양자화되고, 양자화된 예측오차의 열을 4와 2 단위로 분할하여 예측오차의 학습된 열로 구성된 각각의 코드북과 비교한다. 비교 결과 코드북의 주소를 생성하여 전송하고, 복원시 화소값을 확장한다. 제안된 방법은 DPCM방법보다 2.4~4.06dB 낮은 복원 영상의 화질을 보이지만, 비트율은 2.17~2.34bpp를 얻음으로써 0.66~0.83bpp정도 개선할 수 있다.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2005년도 제31회 KOSCO SYMPOSIUM 논문집
• /
• pp.294-301
• /
• 2005

The instabilities in rocket engines and gas turbine combustors due to the interaction between the fluid flow (acoustics) and the heat transfer (thermal energy) are called thermoacoustic or combustion instabilities. Almost all analysis assumes constant hot section temperature for Modern mathematical analysis of acoustic oscillations in Rijke type devices. However, it is impossible to predict whether a system is stable or not because the flame or heater response model can have a dramatic effect on predicted growth rates. In this study, A standard ${\kappa}-{\varepsilon}$ turbulent model and hybrid combustion model(eddy breakup model and chemical reaction) were used. After steady solution was gotten, unsteady calculation is simulated by perturbating on pressure boundary. As a result, we obtained the relationship of equivalence ratio and frequency by numerical simulation, and they are comparable to the experimental result. In addition, in spite of these results, there are limitations of using turbulent and combustion model in simulation method of thermoacoutic instability

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2002년도 학술대회지
• /
• pp.647-650
• /
• 2002

A thermoacoustic refrigerator, using a resonant standing acoustic wave, has been built. It employs a loudspeaker to sustain a standing wave in a resonance tube. The stack of plates is 0.075mm-thick plastic sheet(Mylar), spirally wound to make a 40mm-diameter assembly 80mm long. and two heat exchanger are installed. The refrigerant is Helium gas. The description of thermoacoustic refrigerator are presented. The directly measured performance of the resonator. Tc/Th ( temperature ratio ) and $COP/COP_{c}$, (normalized by carnot's COP ) are plotted versus the thermal load Q applied to the cold end, for various speaker power.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 추계학술대회논문집B
• /
• pp.229-234
• /
• 2001

The thermoacoustic refrigerator bas not only considerable possibility but also commercial usability, because it bas high reliability, lower vibration, no moving part, and can easily be constructed. In this study, the resonance characteristics of the thermoacoustic refrigerator were investigated for better performance, varying length of the resonance tube to 400mm, 500mm, 600mm, 700mm. In order to determine the optimum resonance tube length and the frequency, the $\lambda/4$ thermoacoustic engine and the similar apparatus of Wheatly type refrigerator were constructed. It was used air as a coolant. in the fifth harmonic, it was taken the highest ${\Delta}t$ that was $56.3^{\circ}C$ at 626Hz in 400mm tube with 40mm stack.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 추계학술대회논문집B
• /
• pp.217-222
• /
• 2001

The thermoacoustic refrigerator has not only considerable possibility but also commercial usability, because it has high reliability, lower vibration, no moving part, and can easily be constructed. In this study, the resonance characteristics of the thermoacoustic refrigerator were investigated for better performance, varying the length of Resonant Tube to 400mm $\sim850mm$. In order to determine the optimum position of stack in the resonance tube and the frequency, the simple $\lambda/2$ thermoacoustic refrigerator was constructed. It was used air as a coolant. in the fifth harmonic, it was taken the highest ${\Delta}t$ that was $52.6^{\circ}C$ at 827Hz in 400mm tube with 40mm stack.