• The Science & Technology
• /
• v.6 no.2 s.45
• /
• pp.28-31
• /
• 1973

원자로제어를 위한 중성자열전대의 응답시간 단축을 목적으로 진공증착된 박모열전대를 이용하여 중성자 열전대를 시작하였다. 이의 실험결과를 선열전대의 것과 비교하였으며, 열중성자동범위 2x(10에 8승)x8x10¹³ neutrons/cm²/sec에서 좋은 선형특성을 가지고 있었다. 시작된 박모중성자열전대를 사용하여 TRIGA MARK-Ⅱ 원자로 로필에서의 열중성자속분포를 측정하였다.

• Journal of Korean Society for Quality Management
• /
• v.23 no.4
• /
• pp.167-174
• /
• 1995

• Proceedings of the Korean Nuclear Society Conference
• /
• 1999.05a
• /
• pp.91-91
• /
• 1999

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.9 no.5
• /
• pp.1-5
• /
• 1972

In order to improve the response time of nelltron theromopile for reactor control a neutron thermopile made use of a vacuunl evaporated thin film thor mocouple was fablicated and tested. The test results were compared with a wire-type neutron thermopile. Good linearities between the response of the neutron thermopile and the thermal flux has been shown in the ranges from n/$\textrm{cm}^2$/sec. Thermal neutron flux distributions in the core of TRIGA Mark-II reactor were measured using the fabricated neutron thermopile, and the results were conpared with data obtained by the acrivatin foil measurement.

• Korean Journal of Cognitive Science
• /
• v.19 no.1
• /
• pp.57-74
• /
• 2008

This study aimed to investigate the preferential brain activations involed in the set size during random number generation (RNG). The BNG condition gave more increased activations in the anterior cingulate cortex (ACC), inferior frontal gyrus (IFG), inferior parietal lobule (IPL), and superior temporal gyrus (STG) than the simple counting condition, which was a control rendition. When the activations were compared by the small set size condition versus the large set size condition, broad areas covering tempore-occipital network, ACC, and postcentral gyrus were more highly activated in the small set size condition than in the large set size condition, while responses of areas including medial frontal gyrus, superior parietal lobule, and lingual gyrus were more increased in the large set size condition than in the small set size condition. The capacity hypothesis of working memory fails to explain the results. On the contrary, strategy selection hypothesis seems to explain the current observations properly.

• The Magazine of the Society of Air-Conditioning and Refrigerating Engineers of Korea
• /
• v.18 no.4
• /
• pp.365-388
• /
• 1989

열병합발전시스템은 엔진 또는 가스터빈구동의 열병합발전설비이며, 전력과 열을 동시에 이용함으로써 높은 총합열효율이 기대되는 열원시스템이다. 그 경제성은 전력과 열의 수요가 년간을 통해서 안정하게 존재할 것이 필요조건으로 된다. 본보는 일년간의 운전기록을 사용하여 현재 가동하고 있는 시스템의 특성, 전력수요와 열부하의 실태를 분석하여 개략적으로 설명하는 것이다. 해석에 사용된 자료는 시간단위의 계획치, 적산치이며, 데이터입력후의 인산, 통계, 도표 작성등은 전부 전산기시스템으로써 처리하였다.

• The Journal of the Acoustical Society of Korea
• /
• v.22 no.1
• /
• pp.35-41
• /
• 2003

Feature vectors for conventional speech recognition are usually extracted in full frequency band. Therefore, each sub-band contributes equally to final speech recognition results. In this paper, feature Teeters are extracted indepedently in each sub-band. The cepstral resolution of each sub-band feature is controlled for the optimal speech recognition. For this purpose, different dimension of each sub-band ceptral vectors are extracted based on the multi-band approach, which extracts feature vector independently for each sub-band. Speech recognition rates and clustering quality are suggested as the criteria for finding the optimal combination of sub-band Teeter dimension. In the connected digit recognition experiments using TIDIGITS database, the proposed method gave string accuracy of 99.125%, 99.775% percent correct, and 99.705% percent accuracy, which is 38%, 32% and 37% error rate reduction relative to baseline full-band feature vector, respectively.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.24 no.1
• /
• pp.60-67
• /
• 2000

An experimental investigation on transient heat transfer phenomena of impinging diesel-spray on a flat plate in a pressurized chamber is carried out. A diesel spray is injected from a single-hole nozzle and impinges to a heated flat plate in the chamber. A fast-response thermocouple installed in the top surface of the plate measures the transient variation of surface temperature of the plate under various conditions of the chamber pressures. Utilizing the semi-infinite model, the temporal variation of the heat flux on the plate is determined. Effects of various parameters, such as vertical distances between the nozzle and the plate, radial distances from the injection-axis, and the chamber pressures, on the heat flux characteristics of impinging diesel-spray are studied.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.8 no.1
• /
• pp.1-9
• /
• 2000

In the present study, the IDI-type constant volume chamber, which utilizes the indirect injection stratified charge method, is used to solve several problems including misfires and cycle-variations caused by unstable initial ignitions. A subchamber has been used to make an ignitable mixture under the low mean equivalence ratio. After burned in the subchamber, the flame jet getting through the passage hode enters the main chamber and burns the lean charge. There are many factors which affect the combustion characteristics of the indirect injection stratified engine. The passage hole angle is the most important since it determines the direction of flame flows into the main chamber. In the present study, we measured the combustion pressure, and the wall temperature, and computed the heat flux through the cylinder wall in order to understand the combustion characteristics depending on passage hole angle and the equivalence ratio.

• Korean Journal of Heritage: History & Science
• /
• v.54 no.4
• /
• pp.90-111
• /
• 2021

Seojangdaeyajodo is a drawing of Jangyongyoung's military night training on February 12 (lunar leap month), 1795. Focusing on the Seojangdaeyajodo, the positions and roles of the low-ranking soldier belonging to Jangyongyoung, and the composition and characteristics of military uniforms for each role were examined. The results ascertained by the historical research on the military uniforms are as follows. Deungronggun, noeja, sunryeongsu and daegisu who were placed in front of the king's Seojangdae were the low-ranking soldiers belonging to Jangyongyoung. The soldiers who escorted the king around Seojangdae were lowranking soldiers belonging to Jangyongyoung. The military uniform of the deungronggun was consisted of a jeolrip, a black heopsu, red gweja, indigo jeondae, white haengjeon and black shoes. The low-ranking soldier's heopsu suggested that it could also be a sochangui. He carried a sword and a red lantern. Noeja were divided into a sinjeonsu and a jujangsu. The military uniform of the noeja was consisted of a Jujeolrip, a black heopsu, red gweja, indigo jeondae, white haengjeon, and black shoes. Sunryeongsu were divided into a sinsigisu and a younggisu. The military uniform of the sunryeongsu was consisted of a jeongeon, a black heopsu, red gweja, indigo jeondae white haengjeon and black shoes. He carried a sword and a red lantern. The military uniform of the daegisu was consisted of a jeongeon, a black heopsu, blue gweja, indigo jeondae, white haengjeon and black shoes. He carried a sword and a flag. The soldiers surrounding Seojangdae and the seongjeonggun defending the fortress were the Chogun. The military uniform of the chogun was consisted of a jeolrip, a black heopsu, houi, indigo jeondae, white haengjeon and straw shoes. Houi was applying the five directional colors: the east is blue, the west is white, the south is red, and the north is black. He carried a sword and a gun. It was presented as an illustration of costumes that could produce contents by reflecting on these historical results. The basic principle of the illustration was to present the standards for 3D content production or actual production. Samples of form, color, and material according to the times and status were presented. The front, the side, and the back of each costume and the feature were presented, and the colors were presented in RGB and CMYK.