• Title/Summary/Keyword: 열 보조 가공

Search Result 10, Processing Time 0.031 seconds

A Study on the Preheating Effect of Multi-Heat Sources using Laser Plasma in the Thermally Assisted Machining of a High-Melting-Point Material (고융점 소재의 열 보조 가공에서 레이저 -플라즈마 다중열원의 예열 효과에 대한 연구)

  • Lee, Choon-Man;Kim, Seong-Gyu
    • Journal of the Korean Society of Manufacturing Process Engineers
    • /
    • v.18 no.10
    • /
    • pp.93-98
    • /
    • 2019
  • Recently, with the development of the aerospace and automotive industries, the demand for high-melting-point materials has increased. However, high-melting-point materials are difficult to cut through conventional machining methods. Thermally assisted machining (TAM) is a method for improving the machinability by preheating the materials. A laser, the most commonly used device for TAM, has high efficiency through local preheating but is not sufficient for maintaining a high preheating temperature due to rapid cooling. However, the use of multi-heat sources can supplement the disadvantage of a single heat source. The high preheating temperature can be maintained with a wide and deep heat-affected zone (HAZ) by multi-heat sources. The purpose of this study is to analyze the preheating effects of multi-heat sources using laser plasma. Thermal analysis and preheating experiments were carried out. As a result, the high preheating effect of multi-heat sources compared with a single heat source was verified.

Study on the Preheating Method of NURBS Shaped Workpiece by Laser Assisted Machining (레이저보조가공에서 NURBS 곡면 형상의 예열방법에 대한 연구)

  • Kim, Eun-Jung;Lee, Choon-Man
    • Journal of the Korean Society for Precision Engineering
    • /
    • v.33 no.2
    • /
    • pp.101-107
    • /
    • 2016
  • Laser-Assisted machining (LAM) is a new method for processing hard-to-cut materials. However, curved shapes are difficult to predict the preheating effect of by LAM because heat sources are changed by moving laser module. So, it is necessary to study the preheating effect of the laser heat source irradiated on a 3-dimensionally shaped workpiece, such as a NURBS shaped workpiece. In this study, thermal analysis and preheating experiment of the LAM for the NURBS shaped workpiece are performed. Also, two machining methods are proposed to avoid interference of laser module and cutting tool. The results of the analysis can be applied to various shaped workpieces by LAM.

An Analytical Study on the Preheating Effect of Flat Workpiece in Thermally Assisted Machining by Multi Heat Sources (다중열원 보조가공을 위한 평판 시편의 예열 효과에 관한 해석적 연구)

  • Moon, Sung-Ho;Lee, Choon-Man
    • Journal of the Korean Society for Precision Engineering
    • /
    • v.33 no.8
    • /
    • pp.629-634
    • /
    • 2016
  • Laser-assisted machining (LAM) is one of the most effective methods of processing difficult-to-cut materials, such as titanium alloys and various ceramics. However, it is associated with problems such as the inability of the laser heat source to generate an appropriate preheating temperature. To solve the problem, thermally assisted machining with multiple heat sources is proposed. In this study, thermal analysis of multiple heat sources by laser and arc is performed according to power, heat source size, and leading heat source position. Then, the results are analyzed according to each condition. The results of this analysis can be used as a reference to predict preheating temperature in thermally assisted machining with multiple heat sources.

Analysis of Overlapping Heat Zones in Laser-Assisted Machining (레이저보조가공에서 중첩열원에 관한 해석 연구)

  • Baek, Jong-Tae;Lee, Choon-Man
    • Journal of the Korean Society for Precision Engineering
    • /
    • v.32 no.12
    • /
    • pp.1023-1029
    • /
    • 2015
  • Laser-assisted machining (LAM) is one of the most effective methods for enhancing the machinability of difficult-to-cut materials, such as titanium alloys and various ceramics, and has been studied by many researchers. LAM is a method that facilitates machining by softening a workpiece using a laser heat source. The advantages of the LAM process are decreases in tool wear, cutting force, and surface roughness. However, when the material is over-heated, melting or burning can occur. This study analyzed the heat source distribution with regard to overlapping of preheating on the laser heating path with an acute angle, a right angle and obtuse angles. Then, a power reduction method was proposed to reduce the melting and burning of the workpiece.

Analytical Study of the Determination of Distance between the Laser Heat Source and Tool for Laser-Assisted Machining (레이저보조가공에서 열원과 공구 사이의 거리선정을 위한 해석적 연구)

  • Baek, Jong-Tae;Lee, Choon-Man
    • Journal of the Korean Society for Precision Engineering
    • /
    • v.32 no.8
    • /
    • pp.699-704
    • /
    • 2015
  • Laser-assisted machining has shown its potential to significantly improve product quality and reduce manufacturing costs; additionally, laser-assisted turning (LAT) and laser-assisted milling (LAM) have been studied by numerous researchers. A research study on the determination of the distance between the laser heat source and the tool for laser-assisted machining, however, has not yet been attempted; we conducted such an analysis by using a finite-element method and heat-transfer equation. The results of this analysis can be used as a reference for the determination of the distance between the laser heat source and the tool for laser-assisted machining.

Design and Fabrication of Micro Laser Module for Heat Assisted Magnetic Recording (차세대 열 보조 자지기록용 마이크로 레이저 모듈 설계 및 제작)

  • Lee, S.C.;Choi, Y.B.;Kim, Y.J.;Kim, D.S.
    • Proceedings of the Korean Society for Technology of Plasticity Conference
    • /
    • 2009.05a
    • /
    • pp.68-69
    • /
    • 2009
  • Heat Assisted Magnetic Recording (HAMR) is one of the most promising candidates for high density magnetic storages over 1 Tb/$in^2$ areal density. Since the precise light delivery to the head is a key factor to realize HAMR application, it is required to establish the light delivery using micro laser module and micro actuator. For the careful control of micro actuator, a laser module was designed including laser diode, optical fiber, collimating lens, and fabricated V-groove substrate. In addition, the basic aligning method between the laser module and HAMR head was studied by the detection of current change in photo diode due to the amount of reflected light from the head.

  • PDF

Steady & Pulse Mode Fire Tests of Hydrazine Thrusters (단일 하이드라진 추력기 연소시험 성능평가)

  • 이성택;이상희;최영종;류정호
    • Proceedings of the Korean Society of Propulsion Engineers Conference
    • /
    • 1998.04a
    • /
    • pp.31-31
    • /
    • 1998
  • 위성체의 보조추진시스템은 임구궤도까지의 궤도진입 및 임무궤도상에서의 속도 또는 자세제어에 필요한 임펄스를 제공한다. 단일하이드라진 추력기는 하이드라진(H$_2$H$_4$)과 자발적 촉매(Shell 405)의 발열 및 흡열 열분해 반응에 의해 발생하는 질소($N_2$), 수소(H$_2$), 암모니아(NH$_3$), 혼합가스를 노즐을 통해 방출하므로써 요구되는 impulse를 얻는다. 단일하이드라진 추력기 설계는 주입기, 촉매대, 노즐과 기타 설계 형태에 따른 다지관, 링, 스크린, 지지판 등의 부수적인 부품으로 구성된다. 추력기 제작 과정은 크게 piece-parts 기계가공, HEA(Head End Assembly)와 TCA(Thrust Chamber Assembly)로 구성되고 각 세부공정마다 전수시험 및 검사를 가진다. 연소시험설비는 최소 모사진 공 수준이 고도 100,000 ft(8.4 torr)를 만족시킬 수 있는 진공설비, 시험제어부, 성능변수 측정 및 처리부, 추진제 가압 공급부, 기타 환경 안전 및 부대 설비로 구성된다. 추력기 연소성능시험 절차는 추진제 충전 및 오염 여부 표본 검사, 가압 및 공급 라인 이상여부 확인, 추력기 장착, 추진제 가압 및 공급, 시험장치 보정, 진공 모사 및 연소성능시험, data 처리 등으로 구성된다.

  • PDF

Design and Prototyping of Lifting Devices for Manhole Cover using Structural Analysis and 3D Printing (3D 프린팅과 구조해석을 이용한 맨홀의 부양장치 설계 및 제작)

  • Lee, Hyoungwook
    • Journal of the Korea Academia-Industrial cooperation Society
    • /
    • v.19 no.10
    • /
    • pp.648-654
    • /
    • 2018
  • In order to maintain manholes installed on the road, the manhole should be easy to open and close. Manhole covers under harsh conditions require that they can be lifted when attempting to open the manhole because the frame and cover are stuck and difficult to open and close. In this study, the design of a lifting mechanism was carried out to improve and integrate the locking type manhole. The mechanism of the locking manhole is that when the bolt located at the center is turned, the hub connected with the bolt descends, and the hook connected to the hub is rotated. The end of the hook is hooked to the manhole frame. The auxiliary device was installed on the hook so that the manhole cover can be lifted. The structure was designed to endure about 300kg of lifting force based on 70% of the yield stress of the hook to perform lifting function. The shape design was performed through the structural analysis using the finite element method. First, the basic design was performed with the simplified 2-dimensional model and the attachment position and shape were designed through the 3-dimensional model. In order to find out the structural problems of the designed shape, the scale downed model was fabricated through 3D printing and confirmed that the lifting function worked. Finally, it was confirmed that both the locking and the average lifting of about 6.1 mm can be done by applying the lifting mechanism through the machining and applying it to the existing locking manhole.

Information Technology and Social Science Information Services (정보기술과 사회과학 정보봉사)

  • Jeong Dong-Youl
    • Journal of the Korean Society for Library and Information Science
    • /
    • v.25
    • /
    • pp.295-324
    • /
    • 1993
  • 최근 정보기술의 급속한 발달 따라 사회 전반적인 체제의 정보화 현상으로 개인이나 조직의 활동이 정보와 밀접한 관련성을 가지게 됨으로써 이용자의 정보 수요에 적합한 정보원을 제공하는 매개자의 기능을 수행하고 있는 정보전문가의 역할이 한층 더 부각되고 있다. 이러한 영향이 도서관이나 정보센터의 모든 활동에 파급됨에 따라 정보를 수집, 가공, 분석. 저장 및 전달을 담당하고 있는 정보 전문가는 종래의 문헌중심봉사(book-based service)에서 정보중심봉사(information-based service) 형태로 역할 변환이 요구되고 있다. 특히 주제전문 봉사를 담당하고 있는 사서나 정보전문가는 이러한 정보기술의 파급효과를 더욱 실감하고 있는 실정이다. 이러한 상황에서 본 연구는 첫째, 정보기술의 발달이 사회과학 분야의 정보봉사에 미치는 영향과 효과를 살펴보고. 둘째로 사회과학 분야 정보제공을 위한 정보시스템의 특성 분석과 정보기술을 매체로 이용하고 있는 정보전문가의 정보기술에 대한 인식을 실증적으로 분석하고 있으며, 마지막으로 정보사회에서 다양한 정보제공을 담당할 사회과학 정보전문가의 새로운 역할 모델을 제시하고 있다. 사회과학 분야의 정보제공을 효율적으로 수행하기 위한 정보시스템의 구축은 학제적 성을 지니고 있는 사회과학 전반에 대한 이해와 특성을 파악함으로써 가능하다. 사회과학의 연구대상은 인간 상호작용에 관한 지식의 전반적인 분야를 포괄하고 있어 많은 주제분야가 서로 중복되거나 상호 호환적인 성격을 지니고 있기에. 사회과학 정보시스템이 이용자의 정보요구에 만족을 주기 위해서는 이용자의 유형, 정보요구의 형태 및 그 해결방안에 일차적 관심을 가져야한다. 사회과학 분야의 정보유통 체제를 살펴보면, 대부분 통계자료나 단편적인 데이타로 시작되는 원자료가 사회과학자나 연구자에 의해 "지적 변환(intellectual transformation)" 과정을 거쳐 논문이나 저서 등과 같은 정형화된 문헌의 형태로 나타나게 된다. 정형화된 문헌이 다른 이용자의 요구에 효율적으로 이용되기 위하여 다시 "서지적 변형(bibliographic transformation)" 과정이 수반됨으로써 도서관이나 정보센터의 정보시스템에서 문헌검색이 가능하게 된다. 정보기술의 발달과 보급 이전에는 서지적 변형 단계에서 대부분 정보제공시스템의 역할이 종결되었으나, 최근 정보기술의 활용으로 서지적 변형 후 각종 정보자료의 색인과 초록 및 네트웍 화를 통한 자동화 과정이 이루어짐으로써 이용자의 정보요구에 최대의 만족을 제공할 수 있는 정보자료의 체계적인 분석과 효율적인 통제로 포괄적인 정보관리 차원으로 이전되고 있음을 알 수 있다. 사회과학 분야를 담당하고 있는 사서를 대상으로 실시한 설문조사에서 새로운 정보기술의 활용에 따른 정보전문가의 인지적 혹은 업무 적 변화가 매우 긍정적인 방향으로 뚜렷이 나타나고 있음을 알 수 있다. 정보기술을 이용하고 있는 대부분의 사서들은 정보기술이 그들의 정보봉사 업무를 쉽게, 빠르게. 그리고 정확하게 처리하고 있으며, 새로운 정보기술 습득에 호의적인 반응을 보이고 있다. 아울러 정보기술의 이용에 따른 추가적인 책임이나 의무가 수반되고 있는 것으로 나타나고 있으며, 정보기술이 정보전문가의 역할을 완전히 대체할 정도로 위협을 느끼고 있지는 않는 것으로 조사되고 있다. 종합적인 반응은 대부분의 사서들이 정보 봉사 업무에 정보기술의 활용을 매우 바람직한 것으로 보고 있으며. 이용자 요구를 극대화하기 위한 정보관리에 필수불가결 한 도구로 인식하고 있다. 과거의 유능한 사서나 정보전문가는 자관의 정보원에 대한 철저한 이해로 이용자의 요구에 봉사하는 것으로 간주되었으나, 현재 그리고 미래의 유능한 정보전문가는 자관은 물론 국가적 혹은 세계적인 정보원에 접근할 수 있는 정보원 관리 능력은 물론 정보기술의 활용과 이용자에 대한 교육적 능력을 동시에 지녀야 할 것으로 여겨진다. 이러한 관점에서 사회과학 분야의 정보제공을 담당하고 있는 정보전문가의 새로운 역할을 크게 이용자 보조 역할, 주제전문가 역할. 시스템 전문가 역할, 그리고 정보원 관리자 역할로 구분할 수 있다.

  • PDF