• Proceedings of the Korean Institute of Resources Recycling Conference
• /
• 2005.10a
• /
• pp.97-106
• /
• 2005

현재 우리나라에서만 연간 약 26만들이 발생되고 있는 농업용 폐비닐은 재생원료로 재활용되어지면 국내외에서 그 용도가 매우 많으나 멀칭용으로 사용되었던 폐비닐은 그 오염도가 워낙 심하여 쉽게 재활용할 수 없는 처지이다. 즉 공급과 수요는 많으나 재생기술의 한계가 병목으로 작용하고 있는 현실이다. 따라서 간단하고 경제적인 방법으로 재활용할 수 있는 습식 및 건식 재생기술의 개발이 계속되어 요구되어 왔다. 강제 세척, 회전분리, 열풍 건조 및 압착성형을 이용한 새로운 간이습식공정을 통하여 멀칭용 농업용 폐비닐을 순도 95% 이상의 탄화 및 열화가 적은 압착 펠렛을 경제적으로 제조할 수 있었다. 이들의 재생 수지는 인장강도 $168.6{\pm}3.9kgf/cm^2$, 파단신을 315.8%, 인장탄성을 $2,551.8{\pm}50.1kgf/cm^2$, 굴곡강도와 굴곡탄성을 $166.7{\pm}7.4kgf/cm^2,\;5,716.2{\pm}242.2kgf/cm^2$ 그리고 충격강도는 $49.2kgf\;cm/cm$을 각각 보여 연질수지로써 기능하기 위한 충분한 성능을 보유하고 있음을 알 수 있었다. 또한 이들의 응용분야 확대를 위하여 fly ash 및 탄산칼슘을 배합하여 이들의 물성변화를 살폈다.

• Journal of IKEEE
• /
• v.5 no.2 s.9
• /
• pp.221-231
• /
• 2001

In this paper, we propose an efficient requantization method for INTRA frames in heterogeneous transcoding from MPEG-1 to MPEG-4 simple profile. The quantizer for MPEG-1 INTRA MB usually uses a quantization weighting matrix while the quantizer for MPEG-4 simple profile doesn't. As a result, the quantization step sizes of the two quantizers may not be the same even for the same quantization parameter. Due to this mismatch in the quantization step site, the transcoded MPEG-4 sequence suffers from serious quality degradation and the number of bits produced by transcoding increases from the original MPEG-1 video sequence. To solve these problems, we propose an efficient method to find a near-optimum reconstruction level in the transcoder. We also present a PDF (probability distribution function) estimation method for the original DCT coefficients of MPEG-1 video sequence, which is required for the proposed requantization. Experimental results show that the proposed method gives $0.3{\sim}0.6dB$ improvement in PSNR over the conventional method, even at the reduced bit-rate about $5{\sim}7%$ from the conventional method.

• Journal of Broadcast Engineering
• /
• v.12 no.5
• /
• pp.516-524
• /
• 2007

In order to use limited frequency resources efficiently, a single frequency network using digital on-channel repeater(DOCR) has been studied and would be implemented. The DOCR generates strong pre-ghosts to ATSC DTV receivers. The forward filter of equalizer in ATSC DTV receivers compensates the distortion made by pre-ghosts. This process induces noise enhancement and colored noise, thereby results in the performance degradation. In this paper we propose to use a dual-feedback equalizer to combat strong pre-ghosts. The proposed equalizer has two feedback filters. One is the decision feedback filter and the other is non-decision feedback filter. The additional non-decision feedback filter decreases the noise by whitening the noise and preventing the generation of colored noise in pre-ghost channel. Thus the equalization technique of dual-feedback structure has performance enhancement in pre-ghost channel in comparison with conventional decision feedback equalizer(DFE). By simulation we analyzed the performance enhancements of DTV receiver using dual-feedback equalization structure.

• Journal of the Korean Institute of Gas
• /
• v.5 no.3 s.15
• /
• pp.15-22
• /
• 2001

Reliability evaluation of welded structures by mechanical testing of weld heat-affected zones (HAZs) has become general practice throughout the world. HAZs of steel welded Joints show a gradient of microstructure from the fusion line to the unaffected base metal. This study is concerned a correlation between the microstructural change and the fracture characteristics in HAZs of both seam and girth welds of API 5L X65 pipeline steel, which is generally used for natural gas transmission pipelines in Korea. The focus in this study is the investigation of macroscopic fracture behavior of the various regions within HAZ. Changes in microstructure and toughness were observed using actual HAZ specimens. To evaluate the macroscopic toughness of actual HAZ, Charpy V-notch impact test and CTOD test were performed.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.2A
• /
• pp.157-165
• /
• 2004

The synchronization algorithm of IEEE 802.11a WLAN(Wireless Local Area Network) has three consecutive processes, which use a short code training symbol, a long code training symbol and a pilot symbol respectively. But in using this synchronization processes, the actual embodiment has two problems. First, the synchronization process has the complex structure using a long code training symbol and a pilot symbol. Second, since the long training symbol is only compensated with the offset correction coefficient, it can not be trusted perfectly. If the equalizer coefficient is obtained in this unstable period, the system performance is degraded. In particular, the system performance becomes worst in case of the 54 Mbps transmission system using the maximum length of data. In this paper, the new algorithm is proposed which can resolve the embodiment complexity of synchronization processes and structural defect, and also it is confirmed by simulation.

• International Journal of Highway Engineering
• /
• v.19 no.2
• /
• pp.7-15
• /
• 2017

PURPOSES : Infiltration of moisture, polluted material, and deicer into concrete, accompanied by freeze and thaw can cause significant deterioration of concrete pavement. In order to protect concrete from deterioration, it is necessary to prevent the infiltration of these concrete external materials. The moisture-repellent agent, which is a surface treatment and maintenance material added to concrete structures to render them water resistant, has advantages such as prevention of water infiltration and security against air permeation. Nano-coat, which is referred to as silicon hydride, is typically used as a moisture-repellent agent. Therefore, in this study, an attempt is made to use penetration-type Nano-coat as an alternative in order to evaluate its applicability through environmental resistance tests. METHODS : This study aimed to evaluate the applicability of penetration-type Nano-coat, which can provide water repellency to concrete, in concrete pavements, through various environmental resistance tests such as freezing and thawing resistance, chloride ion penetration resistance, and surface scaling resistance tests. The applicability of penetration-type Nano-coat was demonstrated based on the specification of KS F 2711, KS F 2456, and ASTM C 672. RESULTS :In the case of penetration-type Nano-coat applied on sound concrete, an increase in concrete durability was demonstrated by the negligible chloride ion penetrability and the absence of scaling, as revealed by visual observation of the surface, after 50 cycles of scaling resistance test. In addition, test result of the application of penetration-type Nano-coat on deteriorated concrete established that concrete surface pretreated by grinding provided improved durability than non-treated concrete. CONCLUSIONS :This study indicates that penetration-type Nano-coat is applicable as an effective alternative, to increase the durability of concrete structures. In addition, it was known that pretreatment of deteriorated concrete surface, such as grinding, is required to improve the long-term performance of concrete pavement.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.16 no.11
• /
• pp.2411-2417
• /
• 2012

Globally, the emergence of smart phones vitalized the ecosystem of mobile data service industry. Consequentially, mobile data traffic has been explosively growing and the speed of growth will be more steep. New spectrum will be required in order to properly accommodate the explosively growing mobile data traffic. However, it will be difficult to acquire a sufficient guard band between different frequency bands because the range of frequency which is suitable for wireless communications is limited. Thus, the performance degradation caused by inter-band interference will be one of challenging problems in the next generation mobile communication systems. In this paper, we analyze the performance degradation caused by inter-band interference by computer simulations in various environments. Our results show that the impact of the inter-band interference is more critical when own signal is poor or its own interference from neighboring cells is low.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2002.11a
• /
• pp.880-883
• /
• 2002

In this paper, we propose the synchronization recovery algorithm which is suitable to wireless multimedia of wireless channel situation which is being used OFDM signaling method. The basic of the suggested clock synchronization. restoration Algorithm is to getting the shock response of channel or getting the multipath strength profile through IFFT after the getting the frequency, response of deducted channel from channel deductor of receiver and to trace the location in the channel energy concentrated area of timing area. And it also analysis the start point of 64-QAM and 16-QAM if the sampling clock offset has the sample of $\pm$1-3, and we identified the occurance of performance deterioration when occures more than 2 samples of offset to compare with star point and BER performance in optimum sampling point result of BER performance checking, and we know that the recovery algorithm proposed algorithm also provide excellent synchronization characteries under frequency, selecting fading channel as result of simulation.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.19 no.5
• /
• pp.901-911
• /
• 1994

The error performance of M-ary differential phase shift keying (MDPSK) through m-distribution fading channel in hybrid direct sequence/slow frequency hopped spread spectrum multiple access (DS/SFH-SSMA) systems has been evaluated, and also the error probability has been evaluate when adopting diversity technique and coding technique. From the results, we know that the error performance more deteriorates as depth of fading becomes deeper. In Rayleigh fading environment (m=1), increasing of the number of frequency hopping (q) reduces the effect of multiple access interference, because it decreases the probability a hit. When q is much larger than the number of user (K), the probability of error in high E/N region is dominated by the multipath interference while the multiple access interference is negligible. In lower E/N region, the probability of error is independent of q because the effect of gaussian noise becomes dominat.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.13 no.4
• /
• pp.87-95
• /
• 1999

A primary limitation of the awlication of New class of solid state high power, high speed electronic device, narrely, the Photo-Conductive Power Switch(PCPS) is that the switches flashover at the surlace under average awlied fields much less than the bulk breakdown field of the semiconductor in most cases. The only way overcome those problffi1 and has a workable compact solid state switch is to passivate the surlace by a solid state dielectric material. In this experirrentation, The voltage withstands of Silicon is to be severely degraded when operated in vacuum(10[kV/cm]) and the perlormance is improved when operated in air(30[kV/cm[), in SF6(80~100[kV/cm]). After the passivation, the device had a breakdown field in vacuum and air at a field as high as the unpassivated device in SF6. A experirrent results show passivated devices have excellent breakdown field. In this paper, We improved the main properties and mechanism of the silicon breakdown before and after passivation under high field. field.