• Journal of Korean Society for Geospatial Information Science
• /
• v.8 no.1 s.15
• /
• pp.51-63
• /
• 2000

Dynamic traffic assignment(DTA) has been a topic of substantial research during the past decade. While DTA is gradually maturing, many aspects of DTA still need improvement, especially regarding its formulation and solution algerian Recently, with its promise for In(Intelligent Transportation System) and GIS(Geographic Information System) applications, DTA have received increasing attention. This potential also implies higher requirement for DTA modeling, especially regarding its solution efficiency for real-time implementation. But DTA have many mathematical difficulties in searching process due to the complexity of spatial and temporal variables. Although many solution algorithms have been studied, conventional methods cannot iud the solution in case that objective function or constraints is not convex. In this paper, the genetic algorithm to find the solution of DTA is applied and the Merchant-Nemhauser model is used as DTA model because it has a nonconvex constraint set. To handle the nonconvex constraint set the GENOCOP III system which is a kind of the genetic algorithm is used in this study. Results for the sample network have been compared with the results of conventional method.

• Korean Journal of Soil Science and Fertilizer
• /
• v.22 no.1
• /
• pp.31-38
• /
• 1989

A series of experiments was conducted to determine the contents and distribution of amino acids in the hydrolysates of humic acids extracted from 3 plant materials. Wild grass hay, and leaves of forest trees were used in this study. Seventeen amino acids were analyzed and their amounts determined. Results obtained from the experiments are summarized in the following: 1. Contents and distribution of hydrolyzable amino acids in the humic acid fractions depend on the kind of plant materials and the allowed time for humification. 2. Neutral amino acids was the largest part of the total amino acids, followed by acidic amino acids, and basic amino acids. 3. The total amounts of amino acids in the hydrolyzable humic acid fractions of well humified residues were in the following order: wild grass hay > leaves of deciduous trees > leaves of coniferous trees 4. In general the relative amounts of lysine increased with humification progressing. S. Glycine and glutamic acid were the two major amino acids in common for the hydrolysate of humic acids extracted from well decomposed residues of plant materials. Alanine, glutamic acid, glycine, aspartic acid and leucine were the five major amino acid in common in raw materials without exception. 6. Arginine appeared to be absent in any of the hydrolysates of humic acids from well humified plant materials. 7. Phenylalanine and tyrosine were present in all hydrolysates and their relative contents increased with the humification of plant materials.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.24 no.6
• /
• pp.451-464
• /
• 2022

The high-level nuclear waste repository is a deep geological disposal system exposed to complex environmental conditions such as high temperature, radiation, and ground-water due to handling spent nuclear fuel. Continuous exposure can lead to cracking and deterioration of the structure over time. On the other hand, the high-level nuclear waste repository requires an ultra-long life expectancy. Thus long-term structural health monitoring is essential. Various sensors such as an accelerometer, earth pressure gauge, and displacement meter can be used to monitor the health of a structure, and a piezoelectric sensor is generally used. Therefore, it is necessary to develop a highly durable sensor based on the durability assessment of the piezoelectric sensor. This study designed an accelerated life test for durability assessment and life prediction of the piezoelectric sensor. Based on the literature review, the number of accelerated stress levels for a single stress factor, and the number of samples for each level were selected. The failure mode and mechanism of the piezoelectric sensor that can occur in the environmental conditions of the high-level waste repository were analyzed. In addition, two methods were proposed to investigate the maximum harsh condition for the temperature stress factor. The reliable operating limit of the piezoelectric sensor was derived, and a reasonable accelerated stress level was set for the accelerated life test. The suggested methods contain economical and practical ideas and can be widely used in designing accelerated life tests of piezoelectric sensors.

• Korean Journal of Heritage: History & Science
• /
• v.51 no.4
• /
• pp.66-83
• /
• 2018

This article focuses how the materials of hatstrings of the 19th to 20th century gat, the Korean top hat for men among the collections of National Folk Museum of Korea, was transformed after port opening treaties with overseas since 1876. As a result of analyzing the materials of the hatstrings, amber, tortoiseshell, wood and bamboo as the traditional materials were used, and ivory, glass (soda glass, lead glass, alkali mixed glass) and plastics (cellulose nitrate, phenol-formaldehyde, polystyrene, acryl) were newly used for the hatstrings. Bamboo, wood and amber were the most frequently used materials. Bamboo was mainly used for the pipe of hatstring and were combined with beads and central decorations of other materials. This shows the trend of bamboo hatstring according to the simplification of the clothing and the culture by Regent Heungseon Daewongun. Ambers were used in the central decorations and beads and the origin of ambers was baltic amber just like the amber relics found in Korea. Compositions of glass were soda glass and alkali mixed glass which were excavated or handed down in Korea from ancient times to Joseon dynasty. But in the case of lead glass, Na2O was detected and it is considered to be a new type lead glass for crafts which came from overseas after port opening since 1876 because it showed the characteristic that it deviates from the lead glass component found in Korea. Plastics such as cellulose nitrate and phenol-formaldehyde were used as new synthetic materials to replace traditional materials such as tortoiseshell, amber, and coral as in the West. Cracks, crazing, crumbly and yellowing of cellulose nitrate of hatstrings were observed by deterioration. The survey of the materials of the 19th to 20th century hatstrings among the collections of National Folk Museum of Korea showed that the introduction of new materials such as glass and plastics were used to replace natural materials such as tortoiseshell and amber along with the use of traditional materials after port opening since 1876.

• Journal of Broadcast Engineering
• /
• v.24 no.1
• /
• pp.118-131
• /
• 2019

In order to provide 8K UHD contents of terrestrial broadcasting with a large capacity, the terrestrial broadcasting system has various problems such as limited bandwidth and so on. To solve these problems, UHD contents transmission technology has been actively studied, and an 8K UHD broadcasting system using terrestrial broadcasting network and communication network has been proposed. The proposed technique is to solve the limited bandwidth problem of terrestrial broadcasting network by segmenting 8K UHD contents and transmitting them to heterogeneous networks through hierarchical separation. Through the terrestrial broadcasting network, the base layer corresponding to FHD and the additional enhancement layer data for 4K UHD are transmitted, and the additional enhancement layer data corresponding to 8K UHD is transmitted through the communication network. When 8K UHD contents are provided in such a way, user can receive up to 4K UHD broadcasting by terrestrial channels, and also can receive up to 8K UHD additional communication networks. However, in order to transmit the 4K UHD contents within the allocated bit rate of the domestic terrestrial UHD broadcasting, the compression rate is increased, so a certain level of image deterioration occurs inevitably. Due to the nature of UHD contents, video quality should be considered as a top priority over other factors, so that video quality should be guaranteed even within a limited bit rate. This requires packet scheduling of content generators in the broadcasting system. Since the multiplexer sends out the packets received from the content generator in order, it is very important to make the transmission time and the transmission rate of the process from the content generator to the multiplexer constant and accurate. Therefore, we propose a variable transmission scheduler between the content generator and the multiplexer to guarantee the image quality of a certain level of UHD contents in this paper.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.44 no.6
• /
• pp.84-97
• /
• 2016

This study was to investigate the user's thermal environments of the children's parks according to pavements and sunscreen types during periods of heat waves. The measurements were conducted at the sand pits, rubber chip pavement, shelters, and green shade ground of the two children's parks located in Jinju, Korea(Chilam: $N\;35^{\circ}11^{\prime}1.4{^{\prime}^{\prim}}$, $E\;128^{\circ}5^{\prime}31.7{^{\prime}^{\prime}}$, elevation 38m, Gaho: $N\;35^{\circ}09^{\prime}56.8{^{\prime}^{\prime}}$, $E\;128^{\circ}6^{\prime}41.1{^{\prime}^{\prime}}$, elevation 24m) over three days during 11-13, August, 2016. The highest ambient air temperatures at the Jinju Meteorological Office during the three measurement days were $35.9{\sim}36.8^{\circ}C$, which corresponded with the extremely hot weather. A series of experiments measured air temperature, relative humidity, wind velocity, black globe temperature, and long-wave and short-wave radiation of the six directions 0.6 m above ground level. The wet bulb globe temperature(WBGT) and the universal thermal climatic index(UTCI) were used to evaluate thermal stress. Surface temperature images of the play equipment were also taken using infrared thermography. Surface temperatures of the play equipment and grounds were used to evaluate burn risk through contact with playground materials. The results showed the following. The maximum air temperatures averaged over 1-hour period for three days were $36.6{\sim}39.4^{\circ}C$. The sun shades reduced those temperatures by up to $2.8^{\circ}C$(green shade) and $1.0^{\circ}C/2.3^{\circ}C$(shelters). The minimum relative humidity values averaged over 1-hour period for three days were 44~50%. The sun shades increased those humidity values by up to 6%(green shade) and 4%/6%(shelters). The risk of heat related illness at the measurement sites of the children's parks were extreme and high in the daytime hours. The maximum WBGT values averaged over a 30-minute period for three days were $31.2{\sim}33.6^{\circ}C$. The sun shades reduced those WBGT values by up to $2.4^{\circ}C$(green shade) and $0.5^{\circ}C/2.1^{\circ}C$(shelters) compared to sandpits, but would not block the risk of heat related illness in the daytime hours. The category of heat stress at the measurement sites of the children's parks were extreme and very strong in the daytime hours. The maximum UTCI values averaged over a 30-minute period for three days were $39.9{\sim}48.1^{\circ}C$. The sun shades reduced those UTCI values by up to $7.8^{\circ}C$(green shade) and $4.1^{\circ}C/8.2^{\circ}C$(shelters) compared to sandpits, but could not lower heat stress category from extreme and very strong to strong and moderate in the daytime hours. According to the burn threshold criteria when skin was in contact with playground materials, the maximum surface temperature of the stainless steels($70.8^{\circ}C$) surpassed three seconds $60^{\circ}C$ threshold for uncoated steel, that of the rubber chip($76.5^{\circ}C$) surpassed five seconds $74^{\circ}C$ threshold for the plastic, that of the plastic slide($68.5^{\circ}C$) and seats($71.0^{\circ}C$) surpassed the one min $60^{\circ}C$ threshold for plastic, respectively. The surface temperatures of shaded play equipment were lower approximately $20^{\circ}C$ than those of play equipment exposed to the sun. Therefore, sun shades can block the risk of burns in daytime hours. Because of the extreme and high risk of heat related illness and extreme and high heat stress at the children's parks during periods of heat waves, parents and administrators must protect children from the use of playgrounds. The risk of burn when contact with play equipments and grounds at the children's parks during periods of heat waves, was very high. The sun shades are essential to block the risk of burn from play equipments and grounds at the children's parks during heat waves.