• Journal of Energy Engineering
• /
• v.22 no.4
• /
• pp.333-337
• /
• 2013

본 논문에서는 태양전지의 Ribbon 두께(A-type:0.2mm, B-type:0.25mm)에 따라 3가지 온도조건 ($-40{\sim}65^{\circ}C$, $-40{\sim}85^{\circ}C$, $-40{\sim}105^{\circ}C$)으로 열충격 시험을 수행하였다. 그 결과, A, B type 별 초기 평균효율은 15.2%로 같았다. 하지만, 열충격 시험(600 Cycle) 후 Condition 1에서 A-type 7.5%, B-type 7.7%, Condition 2에서는 8.6%, 13.2%를 나타내었다. Condition 3에서는 각각 11.6%, 19.9%의 감소율을 나타내었다. 열충격 시험 후 A-type보다 Ribbon두께가 두꺼운 B-type의 효율이 크게 감소하였다. 이는 A, B type 모두 이종재료 접합부의 금속간화합물(IMC)층이 형성되어 전기적 저항이 증대된 것으로 판단된다. 또한, B-type의 I-V 특성 곡선 및 EL을 분석한 결과, p-n층이 파괴되고, 병렬저항이 감소하여, 장기적 신뢰성에서 A-type 보다 더 취약한 것으로 나타났다. 향후 태양전지 Ribbon 형상에 따른 장기 신뢰성 특성에 대해 수치해석 및 시뮬레이션 분석이 수반되어야 할 것이다.

• Composites Research
• /
• v.27 no.2
• /
• pp.52-58
• /
• 2014

Short fiber reinforced composites manufactured by injection molding have diverse fiber orientations variable with measuring positions even in the same specimen, which is caused by the flow induced fiber orientation. Fiber orientations considerably affect the mechanical and thermal properties of final composite products. In this study, fiber orientation of injection molded carbon fiber reinforced PA6/PPO composite was measured at several points of the specimen by optical microscopy analysis and the corresponding izod impact strength, coefficients of thermal expansion (CTE) were also measured to investigate the influence of local fiber orientation on the mechanical and thermal properties. Izod impact strength where fiber was perpendicular to the direction of crack propagation was higher than where fiber was parallel to the direction, which could be explained be the impact resistance reinforcing mechanism by fiber orientation. CTE was also lower where fiber was parallel to the measurement direction of CTE than where fiber was perpendicular to the direction, which could be also explained by the dimensional stability mechanism by fiber orientation.

• Composites Research
• /
• v.27 no.3
• /
• pp.83-89
• /
• 2014

The purpose of this study is to improve the strength and thermal conductivity of polybutylene terephthalate (PBT) by embedding various additives. Specimens were prepared using PBT pellets embedded with glass fibers (GF) and boron nitride (BN) powders. The test results showed that tensile strength decreased, and thermal conductivity increased with increasing BN contents. with thermal shock cycles conducted, unfilled PBT showed a considerable decrease in failure strain and strength, whereas strength and thermal conductivity of glass fiber and BN particle-embedded PBT had little differeces. With increasing BN, the thermal conductivity of PBT composites was highly improved.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2013.05a
• /
• pp.106-106
• /
• 2013

C/C Composite는 비교적 낮은 온도에서 산화되어 고유의 특성을 쉽게 잃어버리게 된다. 본 연구에서는 Plasma Spray 코팅방법을 사용하여 다층 코팅층을 형성 시킨 후 $1600^{\circ}C$의 온도에서 열충격 저항성을 평가하였다.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.9 no.2
• /
• pp.240-244
• /
• 1999

Monolithic SiC and SiC/C functionally gradient material (FGM) layers were deposited on graphite substrates by CVD method. Temperature a profiles and thermal stress distributions in the deposited layers under the thermal shock were calculated by a commercially available software package. The designed FGM specimens were found to show an efficient relaxation of thermal stresses at the interfaces, and the specimens were intact even under a thermal shock of $\Delta$T=1600 K.

• The Korean Journal of Financial Management
• /
• v.19 no.2
• /
• pp.159-185
• /
• 2002

한 시계열이 비정상적과정에 의해 생성될 때 이 시계열의 정상성을 확보하기 위하여 시계열의 차분을 수행한다. 이 시계열에 I(1)을 적용하여도 정상적과정이 되지 못하는 경우가 존재하고 있다. 그러면 이 시계열은 과도한 차분과정을 거치게 된다. 따라서 차분모수 d는 0

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2009.11a
• /
• pp.453-456
• /
• 2009

Impact resistance of shape memory alloy hybrid composite(SMAHC) plates were experimentally investigated. Shape memory alloy(SMA) have large failure strain and failure stress and can absorb large strain energies through phase transformation. SMA wires were embedded in composite plates to improve their weak impact resistance. Tensile tests of SMA wires were performed at various temperature to investigate their thermo-mechanical properties. Low-Velocity impact tests of several types of composite plates with SMA/Al/Fe were performed. Embedding SMA wires was most effective to improve impact resistance of composite plates. The effects of SMA position on impact resistance were also investigated.

• Journal of Life Science
• /
• v.24 no.2
• /
• pp.105-111
• /
• 2014

The purpose of this study was to characterize equine heat-shock protein (Hsp) genes and analyze their expression pattern in various horse tissues and blood leukocytes after exercise. In a previous study, RNA sequencing of blood and skeletal muscles of thoroughbreds before and after exercise was performed using differently expressed gene (DEG) analysis. Three Hsp genes (HspH1, Hsp90${\alpha}$ and Hsp70) were selected by DEG analysis and were found to be differentially expressed in either blood or muscle. To validate and extend previous observations on these genes, we performed RT-PCR analyses of horse tissue as well as real-time qPCR analyses of blood leukocytes after exercise. mRNA expression of these Hsp genes was found to be ubiquitous in the analyzed tissues (including thyroid, colon, skeletal muscle, cecum, kidney, spinal cord, heart, and lung). In addition, Hsp mRNA expression of these genes in extracted whole blood increased after 120 minutes of exercise compared to the baseline condition. These results are in agreement with the results of human and other experimental animals, suggesting that regulatory mechanisms that are responsible for upregulation of Hsp gene transcription may be conserved among species. Further investigations to correlate Hsp gene expression patterns with athletic performance or recovery processes after exercise are warranted.

• Korean Journal of Materials Research
• /
• v.10 no.5
• /
• pp.354-659
• /
• 2000

Applications of composite materials have been in progress noticeably in manufacturing areas of automotive, aircraft and in other industries, resulting in ensuing research activities. Carbon-epoxy, one of major composite materials, is investigated for its thermal characteristics. Upon treatments of the composite material with repeated heatings and coolings variations of its elastic constants are monitored to reveal the thermal nature of the composite material. In this study, generally, changes in elastic constants are observed to occur mostly during the first 10~20 thermal cycles. Values of G(sub)13 remain almost unchanged except a minor decrease. However in the observed small changes thermal shocks produce less effect than thermal fatigues. On the other hand, values of $E_1$show gradual increases with the num-ber of applied thermal cycles and temperatures. Meanwhile, values of $E_2$ and G(sub)23 decrease to a certain extent in the early stage during the applications of thermal cycling but are not appreciable affected by frequencies of thermal cy-cles. Also, thermal shocks are observed to induce different effects depending on treatment temperatures.

• Proceedings of the KIEE Conference
• /
• 2006.07d
• /
• pp.2025-2026
• /
• 2006

충격 잡음은 전력선 통신 시스템의 성능을 열하시키는 대표적인 채널 특성 중 하나이다. 이는 배경잡음에 비해 많게는 수십 dB 이상의 레벨을 가지며, 임의 시간적으로 발생하기 때문에 추정 및 제어가 어렵다. 최근 전력선 통신 시스템이 고속화 되면서 한정된 주파수 대역상에서 한정된 신호 전력으로 대용량의 데이터를 전송하기 위해서 대역효율을 높이기 위한 변복조 기법과 오류정정 코드가 적용되고 있으나, 충격 잡음에 의해서 그 성능이 현저하게 열하된다. 일반적으로 충격잡음은 수신단에서 레벨 제한에 의해 그 영향 정도를 줄일 수 있다. 본 논문에서는 전력선 통신 시스템의 성능 향상을 위해 제안되고 있는 LDPC 부호화 OFDM 시스템에 대해 충격 잡음 수신 레벨 제한에 의한 성능 열하의 완화 정도에 대해 연구하였으며, 시뮬레이션을 통해 최적 성능을 위한 수신 레벨 제한 지표를 제시하였다.