• Korean Journal of Food Science and Technology
• /
• v.22 no.4
• /
• pp.415-420
• /
• 1990

To prevent red pepper from post harvest decay and to reduce the labor and drying expenses, the red pepper paste was directly prepared from fresh red pepper. The characteristics of red pepper paste and processing properties were investigated, and the effect of salt and heat on product quality during processing and storage were studied. After the processed red pepper paste was stored at room temperature, $5^{\circ}C\;and\;-3^{\circ}C$ without light for 6 months, kimchi was prepared with the stored red pepper paste to evaluate any quality change. The weight and pH of pericarp were 73.2% of total and 5.0, respectively. Addition of 10% salt to the paste decreased the pH of paste, reducing the sterilization time down to 10 min against growth of Clostridium botulinum. Thermal diffusivity of paste after pasteurization was $1.190{\times}10cm^{-7}/sec$, which was lower than control, probably due to air in pouch. The red pepper paste with 10% salt added, followed by sterilization for 10 min, could be preserved for over 6 months at $5^{\circ}C$.

• Proceedings of the KAIS Fall Conference
• /
• 2010.11a
• /
• pp.482-482
• /
• 2010

하수처리장에서 발생하는 유기성 슬러지는 대부분 해양투기에 의해 처분되고 나머지는 매립, 소각, 퇴비화 등으로 처분된다. 그러나 런던협약 '96 의정서' 발효에 의해 2012년부터 해양투기가 금지되고, 매립장 및 소각장의 신규건설은 님비(NIMBY) 현상에 의해 제한받기 때문에 효과적인 슬러지 처분 및 가용화 방법이 요구되고 있다. 현재 초음파[1]나 열처리[2], 오존[3,4], 미생물 처리[5,6] 등 물리, 화학, 생물학적 처리방안이 연구되고 있으나 이러한 방법들은 에너지 과소비, 2차 오염물질 발생에 따른 처리비용 증가 등의 단점을 가지고 있다. 따라서 본 연구에서는 기존의 연구 방법을 보안하고자 전기분해를 활용하여 슬러지 가용화를 시도함으로써 슬러지 발생을 저감시킬 수 있는 방법을 연구하였다. 본 실험에서는 전기분해를 위해 제작된 불용성 전극은 Titanium에 Iridium을 코팅하여 제작하였고, 최대 20V까지 전압을 고정시키고 시간에 따라 변화되는 전류와 전기전도도, pH 값을 관찰하였다. 실험에 사용된 활성슬러지는 3개월간 합성폐수로 순응화 시킨 후에 시료로 사용하였다. 전기분해에 의해 처리된 활성슬러지의 여액을 분석한 결과 SCOD, TN, TP 농도가 각각 510%, 9%, 106% 증가하였다. 이는 전기분해에 의해 미생물의 세포벽이 파괴되어 세포 내 물질들이 세포 외부로 용출되어 미생물들의 이용이 가능한 상태로 되었음을 알 수 있었다. 이는 국내 하 폐수의 낮은 C/N비 때문에 무산소조에 메탄올 같은 외부 탄소원을 공급하는 대신에 별도의 탄소원 공급 없이 가용화 된 슬러지를 반송시킴으로써 슬러지 저감에 따른 폐기 비용과 운전비용의 절감을 기대할 수 있어, 근본적인 슬러지 발생을 저감시킬 수 있는 해결책이라 할 수 있다.

• Korean Journal of Materials Research
• /
• v.10 no.9
• /
• pp.642-647
• /
• 2000

Nanocrystalline NiAl alloy containing 36at.%Al was synthesized by mechanical alloying (MA). Synthesized powder was sintered by a pulse electric current sintering (PECS) facility. Effecting parameters on the phase transformation were discussed in terms of cooling rate and time spent on heat treatment. The behavior of phase transformation for sintered parts was examined by differential scanning calorimetry (DSC) and X-ray diffraction (XRD) method. Microstructure was observed by scanning electron microscopy (SEM). Martensitic lattice parameter and volume fraction was calculated by direct comparison method in X-ray diffraction analysis.

• Korean Journal of Materials Research
• /
• v.10 no.9
• /
• pp.624-628
• /
• 2000

As a power durable-electrode in SAW filter, Al-1%Cu/tungsten nitride multi-layer thin film was fabricated by magnetron sputtering process. Tungsten nitride films had the amorphous phase at the nitrogen ratio, R, ranging from 10~40%. The amorphization could be controlled by nitrogen ratio, R= $N_2$/($N_2$+Ar) as a sputtering process parameter. Residual stress in tungsten nitride abruptly decreased with the formation of amorphous phase. Al-1%Cu thin film was deposited on the amorphous tungsten nitride. After the multi-layed thin film was annealed for 4 hours at 453K, the resistivity decreased as $3.6{\mu}{\Omega}-cm$, which was due to grain growth reduced crystal defects.

• Microbiology and Biotechnology Letters
• /
• v.6 no.4
• /
• pp.149-153
• /
• 1978

A strain of Streptomyces sp producing chitinase was isolated from soil and its cultural condition and some properties of this enzyme were investigated. When 0.375 per cent of glucose was added to basal medium, this organism produced the most quantities of this enzyme after shaking culture at 3$0^{\circ}C$ for 48 hrs., while the production of the enzyme was repressed at the more concentration of glucose than that. The enzyme had a optimal pH of 7.0, optimal temperature of 5$0^{\circ}C$ and the activity of that was not decreased by heat treatment for 20 minute at 7$0^{\circ}C$. And then the activity was increased by Co$^{2+}$ but was slightly inhibited by Hg$^{2+}$, Ni$^{2+}$, Pb$^{2+}$.EX> 2+/.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.40 no.2
• /
• pp.207-212
• /
• 2016

High-frequency induction hardening (HFIH) is used in many industries and has a number of advantages, including reliability and repeatability. It is a non-contact method of providing energy-efficient heat in the minimum amount of time without using a flame. Recently, HFIH has been actively studied using the finite-element method (FEM), however, these studies only focused on the accuracy of the analysis. In this paper, we analyzed HFIH by using a variable frequency based on the conditions of the same shape and input power then comparing the analysis results to experimental results. The analysis and experimental results indicate that the hardening depths are approximately the same using the optimal frequency of 3kHz.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.171-171
• /
• 2013

2층 FCCL (연성회로기판, Flexible Copper Clad Laminate)에 있어서 폴리이미드 필름과 구리의 접착력을 향상 시키기 위해 기존에 사용되고 있는 Ni-Cr대신 박리강도가 높고 에칭성도 매우 뛰어난 Ni-Mo-Nb 박막을 Roll-to roll 스퍼터 장비를 이용하여 개발하였다. 새롭게 개발된 Ni-Mo-Nb 박막은 기존 연구되어진 Ni-Cr 물질 대비 고온 박리강도 약 1.5~2.0배, 에칭성 8배 이상의 매우 우수한 특성을 보였다. Ni-Mo-Nb 접착층의 두께가 7~40 nm로 증가함에 따라 상온 박리강도가 향상 되는 것을 확인하였다. Ni-Mo-Nb 박막을 증착 하기 전 폴리이미드 기판표면을 RF 플라즈마 전처리 하였을 때 0.67 kg f/cm의 우수한 상온 박리강도를 나타내었으며 FCCL 샘플을 $150^{\circ}C$에서 168시간동안 열처리 한 후 접착력을 측정하였을 때도 0.54 kg f/cm의 높은 고온 박리강도를 보였다. FCCL의 박리강도, 표면 거칠기, 원소들의 화학적 결합, 박막의 미세구조를 peel test, atomic force microscopy, X-ray photoelectron spectroscopy, transmission electron microscopy를 이용하여 폴리이미드 기판 플라즈마 전처리 효과를 확인하였다. 그 결과 플라즈마 전처리를 한 폴리이미드 기판의 경우 처리하지 않은 기판보다 상온과 고온에서 더 우수한 접착력을 가지는 것을 확인 할 수 있었는데 이것은 폴리이미드 기판의 표면 거칠기 증가에 의한 mechanical interlocking effect가 아닌 전처리를 통한 폴리이미드 표면 개질로 C-0, C-N와 같은 chemical functional group이 증가했기 때문인 것으로 확인되었다.

• Applied Biological Chemistry
• /
• v.41 no.1
• /
• pp.18-22
• /
• 1998

A mutant strain which hyperproduced thermostable ${\alpha}-amylase$ was obtained by chemical mutagenesis of Bacillus licheniformis. The mutant strain, SK-5, produced the enzyme about 50 times higher than the original strain. The mutant was longer and slimmer in shape, slower in growth compared to the original strain. Nucleotide sequence analysis of the SK-5 ${\alpha}-amylase$ gene revealed no changes in the the structural gene. The changes found in the promoter region might be responsible for the hyperproduction of the enzyme by the mutant. No structural changes in the enzyme structure could be observed when the secreted enzymes at various culture times were analyzed by Western blot.

• Applied Biological Chemistry
• /
• v.33 no.1
• /
• pp.73-78
• /
• 1990

Endo-polygalacturonase was purified from tomato, Lycopersicon esculentum L. The purification procedures included gel filtration on Sephadex G-150 and DEAE-cellulose ion exchange chromatography. Yield of the enzyme purification was 12.74 %. Purified enzyme was confirmed as a active single band by the SDS-polyacrylamide gel electrophoresis. When the purified enzyme was applied to SDS-PAGE, the molecular weight was estimated about 50,000. The optimum pH for the enzyme activity was 5.0 and the range of its stability to the pH was 4.0 to 5.0. The optimum temperature was $50^{\circ}C$, while the enzyme was abruptly inactivated above $50^{\circ}C$. From the result of the study on the effects of metals ion, it was found that $Ag^+$, $Zn^{++}$ and $Mg^{++}$ increased on the enzyme activity. In contrast, $Ba^{++}$, $Hg^{++}$, $Pb^{++}$, $Ca^{++}$, $Mn{++}$, $Cu^{++}$, $Fe^{+++}$, $Na^+$ and $K^+$ decreased it. the reaction catalyzed by this enzyme followed typical Michaelis-Menten kinetics with the Km value of $1.43{\times}10^{-1}\;mol/l$.

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2005.11a
• /
• pp.87-95
• /
• 2005

Laser sealing/cutting technique, one of the 4 core technologies to manufacture self-luminous glass tubes (SLGTs) has been developed. Through the analysis of commercial products it is found that Pyrex Is used for SLGTs. A CO2 laser, which is commonly used for glass work was used for the study The factors affecting the sealing/cutting were laser intensity, duration. Irradiation method, and pressure inside the tube. The whole Process is composed of 2 stages. In the first stage. both ends of the tubes are sealed while tritium is insected in the tubes. And the tritium sealed tubes are cut in the desired size in the second stage. Defocused beam was used for seal ing and focused beam was used for cutting. After the sealing/cutting, the tubes were heat treated to prevent fracture due to the residual heat stress.