• Journal of Korean Tunnelling and Underground Space Association
• /
• v.2 no.2
• /
• pp.3-10
• /
• 2000

The compression wave produced when a high-speed train enters a tunnel propagates along the tunnel ahead of the train. The micro pressure wave related to the compression wave is a special physics phenomena created by high-speed train-tunnel interfaces. A among methods for the purpose of reducing the micro pressure wave is to delay the gradient of the compression wave by using aerodynamic structures. The objective of this paper is to determine the optimum slanted portal using the moving model rig. According to the results, the maximum value of micro pressure wave is reduced by 19.2% for the $45^{\circ}$ slanted portal installed at the entrance of the tunnel and reduced by 41.9% for the $45^{\circ}$ slanted portals at the entrance and exit of the tunnel. Also it is reduced by 34.6% for the $30^{\circ}$ slanted portals installed at the entrance and exit of the tunnel.

• Proceedings of the KIEE Conference
• /
• 2015.07a
• /
• pp.1579-1580
• /
• 2015

철도차량의 동력원은 화석연료를 사용하던 디젤차량에서 최근 고속전철 및 도시철도차량, 경량전철 등 전기를 주 동력원으로 사용되고 있다. 철도차량에 전기를 공급하는 시스템은 일반적으로 개활지 등 지상구간에 적용되고 있는 가공전차선 방식과 지하구간, 터널 등에 적용되고 있는 강체가선방식 그리고 경량전철 등에 채용되고 있는 제 3궤조방식이 있다. 최근에는 일반적으로 지하구간의 가선시스템에 적용되던 T-Bar방식의 강체가선 방식에서 탈피하여 고속주행이 가능한 R-Bar방식의 강체가선 방식에 대한 연구가 많이 이루어지고 있다. 최근까지 지하구간의 터널구조에서 강체전차선로를 급전시스템으로 채택할 경우 열차의 최고속도는 국내의 경우 90km/h, 국외의 경우 160km/h를 넘지 못하는 실정이었다. 그러나 이를 극복한 제품이 개발되어 열차운행 최고속도를 200~250km/h까지 향상시킬 수 있게 되었다. 본 논문에서는 최근 설계속도 250km/h 급 R-bar방식 강체전차선로 인터페이스를 위한 이선현상 모의 시뮬레이터 개념 설계에 관한 연구를 수행하였다. 이를 위해 집전성능과 관계가 있는 전기철도차량 이선현상 요인 및 영향 분석하였으며 강체전차선로 운행에 따른 이선 등으로 인한 영향을 고찰하기 위해 이선 현상 모의 시뮬레이터 개념 설계에 대한 연구를 수행하였다.

• Proceedings of the KSME Conference
• /
• 2000.04b
• /
• pp.611-618
• /
• 2000

The test facility of the 1/60-scale models for the train-tunnel interactions was recently developed to investigate the effects of entry portal shapes, hood shapes and air-shafts for reducing the micro-pressure waves radiating to the surroundings of the tunnel exits by KRRI in Korea. The launching system of train model was chosen as air-gun type. In present test rig, after train model is launched, the blast wave by the driver did not enter to inside of the tunnel model. The train model is guided on the one-wire system from air-gun driver to the brake parts of test facility end. Some cases of the experiments were compared with numerical simulations to prove the test facility.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.25 no.4
• /
• pp.305-330
• /
• 2023

Unlike NATM tunnels, Shield TBM tunnels have split linings. Therefore, the stress distribution of the lining is different even if the lining is under the same load. Representative methods for analyzing the stress generated in lining in Shield TBM tunnels include Non-joint Mode that does not consider connections and a 2-ring beam-spring model that considers ring-to-ring joints and segment connections. This study is an analysis method by Break-joint Mode. However, we do not consider the structural role of segment lining connections. The effectiveness of the modeling is verified by analyzing behavioral characteristics against vibration loads by modeling with segment connection interfaces to which vertical stiffness and shear stiffness, which are friction components, are applied. Unlike the Non-joint mode, where the greatest stress occurs on the crown for static loads such as earth pressure, the stress distribution caused by contact between segment lining and friction stiffness produced the smallest stress in the crown key segment where segment connections were concentrated. The stress distribution was clearly distinguished based on segment connections. The results of static analysis by earth pressure, etc., produced up to seven times the stress generated in Non-joint mode compared to the stress generated by Break-joint Mode. This result is consistent with the stress distribution pattern of the 2-ring beam-spring model. However, as for the stress value for the train vibration load, the stress of Break-joint Mode was greater than that of Non-joint mode. This is a different result from the static mechanics concept that a segment ring consisting of a combination of short members is integrated in the circumferential direction, resulting in a smaller stress than Non-joint mode with a relatively longer member length.