• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.26 no.4A
• /
• pp.761-766
• /
• 2006

Polymer composite are increasingly considered as structural components for use in civil engineering, on account of their enhanced strength-to-weight ratios. Unsaturated polyester (UP) resin have been widely used for the matrix of composites such as FRP and polymer composite, due to its excellent adhesive. Polymer nanocomposites are new class of composites derived from the nano scale inorganic particles with dimensions typically in the range of 1 to 1000 nm that are dispersed in the polymer matrix homogeneously. Owing to the high aspect ratio of the fillers, mechanical, thermal, flame, retardant and barrier properties are enhanced without significant loss of clarity, toughness or impact strength. To prepare the MMT (Montmorillonite)-UP exfoliated nanocomposites, UP was mixed with MMT at $60^{\circ}C$ for 3 hours by using pan mixer. XRD (X-ray diffraction) pattern of the composites and TEM (Transmission Electron Micrographs) showed that the interlayer spacing of the modified MMT were exfoliated in polymer matrix. The mechanical properties also supported these findings, since in general, tensile strength, modulus with modified MMT were higher than those of the composites with unmodified MMT. The thermal stability of MMT-UP nanocomposite is better than that of pure UP, and its glass transition temperature is higher than that of pure UP. The polymer concrete made with MMT-UP nanocomposite has better mechanical properties than of pure UP. Therefore, it is suggested that strength and elastic modulus of polymer concrete was found to be positively tensile strength and tensile modulus of the MMT-UP nanocomposites.

• 한국노년학
• /
• v.31 no.2
• /
• pp.321-341
• /
• 2011

The purpose of this study is to examine income composition elements, poverty rate, and the effects of the transfer income on poverty decrease comparing grandparents-grandchildren households with living alone, couple, and living with adulthood children. Data come from the first(2005) and the second(2007) Korean Retirement and Income Study(KReIS) and the effects of poverty decrease is examined through reconstruction of LIS income definition. The main findings are as follows. First, the total income of the grandparents-grandchildren in 2006 is the lowest and about one-fourth of the households living with adulthood children. Second, the labor income of all households are increasing but the only grandparents-grandchildren's labor income is decreasing. Third, three of ten in grandparents- grandchildren households are in poverty, the poorest households's type is the grandparents-grandchildren in 2006. Fourth, four of ten in grandparents-grandchildren is able to escape poverty after including private and public transfer income. Especially, the effects of the public transfer income in grandparents-grandchildren households is lower in 2006 than in 2004, thus the role of public income security is strongly needed. Existing research was that the poorest type among the elderly group was the living-alone households, but this results show that grandparents -grandchildren households are the poorest group. Thus, income security policy is highly needed for poor skipped-generation households.

• Smart Media Journal
• /
• v.11 no.9
• /
• pp.21-29
• /
• 2022

Ultra Violet(UV) is gradually being replaced with LED instead of general UV lamps. However, the light efficiency of UV LED is still lower than that of the general lamp, and the light efficiency is also low. Due to the current environment and technical problems of UV lamps, the LED replacements are gradually being made. In this study, a new package design and analysis were performed to increase the lifetime and performance of UV LEDs. A new packaging for UV LED were designed and implemented. The new packaging for UV LED was constructed to improve light efficiency. And the electrical and optical characteristics were analyzed respectively. To improve the optical efficiency in UV LED package, the Al has been used based on high reflectivity and applying the optimal lens focusing. Compared to the existing silver Ag, the light efficiency was improved by about 30% or more, and it was confirmed that the light output degradation characteristic was improved by about 10% in the newly applied optical device chip.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.11 no.4
• /
• pp.425-432
• /
• 2023

In this study, we aim to develop a carbon-reducing concrete technology by incorporating biochar. Performance evaluation experiments were conducted on concrete mixtures containing biochar with insulating and carbon-capturing properties, which are essential for key infrastructure sectors such as construction and tunnels. Concrete mixtures were designed with different biochar incorporation rates of 0 %, 5 %, 10 %, 15 %, and 20 %, as w ell as w ater-to-binder ratios of 0.25, 0.30, 0.35, and 0.40. To assess the physical properties of each mixture, unit weight, total porosity, and permeability were measured, while mechanical properties were determined through the measurement of concrete compressive and flexural strengths. Key factors for enhancing the insulating effect of carbon-reducing concrete containing biochar were identified through regression analysis, indicating a close correlation among biochar incorporation rate, unit weight, concrete strength, and thermal conductivity. It is anticipated that it can be utilized as an insulating material to enhance thermal performance in northern regions with severe winter climates.

• Membrane Journal
• /
• v.33 no.6
• /
• pp.439-446
• /
• 2023

Ceramic membranes are generally used for various industrial processes operating under extreme conditions because of its high thermal and chemical stability. However, due to the trade-off phenomenon of permeability and mechanical strength, preparation of high permeability-high strength membrane is necessary. In this study, the change in characteristics and performances of ceramic membranes was analyzed depending on the type of polymer binder and its mixing ratio. Because the solubility between solvent and polymer binder was higher in PSf (polysulfone) than in PES (polyethersulfone), the viscosity and discharge pressure of the PSf-based dope solution were higher than those of PES-based dope solution. When PSf was used as a polymer binder, ceramic membrane showed high mechanical strength and low water permeability due to the dense structure. On the other hand, in case of PES, the mechanical strength was slightly reduced and the water permeability was increased. It was confirmed that the optimum mixing ratio of the PSf and PES with high water permeability and mechanical strength was 9:1.

• The Journal of Engineering Geology
• /
• v.33 no.4
• /
• pp.611-626
• /
• 2023

Overseas examples of the characterization stage of site selection proposed by the International Atomic Energy Agency were reviewed to highlight the factors necessary for consideration in the deep disposal of high-level radioactive waste. Studies in Sweden, Finland, the USA, and Canada were considered. Site investigations in Sweden and Finland commonly covered the fields of geology, hydrogeology, and hydrogeochemistry using similar field investigation techniques. The USA considered survey groups and factors under pre- and post-lockdown guidelines, as well as those for desaturated and saturated surveys. involving geophysical, hydrological, hydrogeological, hydrogeochemical, mechanical/physical, and thermal-characterization investigations. Canada provided a list of investigative methods for both preliminary and detailed site assessments including geological, physical, boring, hydrological, laboratory testing, and chemical analysis studies. Results of this study should elucidate site-selection investigation factors and survey methods applicable to Korea.

• Journal of Korean Society of Forest Science
• /
• v.112 no.4
• /
• pp.530-543
• /
• 2023

Societal value of the benefits forests provide has grown significantly, given their pivotal role in mitigating climate change and fostering the shift toward a carbon-neutral society. Due to the economic and public value of forests, which extends far beyond landowners and foresters, the forestry sector mutually interacts with society as a whole. Thus, understanding public perceptions and preferences concerning forests and forest policies from the societal viewpoint is vital for shaping future forest policy decisions. This research delved into evolving perceptions over the past 32 years, using a time-series analysis of data gathered from the 'Public awareness survey on forests'. This survey, conducted seven times between 1991 and 2023 by opinion poll agents, provides insights into changing sentiments. The findings reveal a notable increase in public satisfaction with overall forest policies. Specifically, positive sentiments were observed regarding forest rehabilitation, forest trails, education initiatives, and the establishment and functioning of forest recreation facilities. Conversely, the study highlights areas where public satisfaction remained relatively low, notably in matters concerning the use and conversion of mountainous regions, forest disaster prevention, and international forest cooperation. Additionally, the respondents emphasized the need for heightened attention to forest management, the development of forest roads, and increased efforts in overseas afforestation compared to current initiatives.

• Applied Chemistry for Engineering
• /
• v.34 no.6
• /
• pp.590-595
• /
• 2023

Novel aromatic imine derivatives with yellow were designed and synthesized for their potential application in color filters for image sensors. The synthesized compounds possessed chemical structures using aromatic imine groups. This innovative material was evaluated thoroughly, considering its optical and thermal properties under conditions similar to commercial device manufacturing processes. Following a rigorous performance evaluation, it was found that (E)-3-methyl-4-((3-methyl-5-oxo-1-phenyl-1H-pyrazol-4(5H)-ylidene)methyl)-1-phenyl-1H-pyrazol-5(4H)-one, abbreviated as MOPMPO, exhibited an impressive solubility of 0.5 wt% in propylene glycol monomethyl ether acetate, predominantly utilized as the solvent in the industry. Furthermore, MOPMPO showed exceptional performance as a color filter material for image sensors, having a high decomposition temperature of 290 ℃. These data unequivocally establish MOPMPO as a viable yellow dye additive for coloring materials in image sensor applications.

• Tunnel and Underground Space
• /
• v.33 no.5
• /
• pp.312-338
• /
• 2023

The underground disposal facility for spent nuclear fuel demands a specialized design, distinct from conventional practices, to ensure long-term thermal, mechanical, and hydraulic integrity, preventing the release of radioactive isotopes from high-temperature spent nuclear fuel. SKB has established design criteria for such facilities and executed practical design implementations for Forsmark. Moreover, in response to subsurface uncertainty, SKB has proposed an empirical approach involving monitoring and adaptive design modifications, alongside stepwise development. SKB has further introduced a unique support system, categorizing ground types and behaviors and aligning them with corresponding support types to confirm safety through comparative analyses against existing systems. POSIVA has pursued a comparable approach, developing a support system for Onkalo while accounting for distinct geological characteristics compared to Forsmark. This demonstrates the potential for domestic implementation of spent nuclear fuel disposal facility designs and the establishment of a support system adapted to national attributes.

• Informatization Policy
• /
• v.30 no.3
• /
• pp.3-28
• /
• 2023

This study aims to analyze the usage behavior of e-government service users based on the e-government maturity model and provide suggestions for advancement of the e-government services. The changes in Korea's e-government services were analyzed as follows; 1) Proportion of use of e-government services in Korean public services, 2) E-government service types/stages use, 3) Service use by platform 4) User response to e-government service 5) Users' requests for future e-government service usage methods. For the analysis, this study used data from Korea's 2012-2020 e-government usage behavior survey data. As a result of the analysis, first, the proportion of e-government service has been continuously increasing, and second, the use of the e-participation stage is relatively low compared to the presenting information, interaction, and transaction stages. Third, by platform, e-government service has been expanded to various access platforms such as mobile, kiosk, and SNS centering on the web. Fourth, users' satisfaction with e-government service is very high. However, to vitalize e-government services, users requested improvements such as providing one-stop integrated services and simplifying authentication procedures. Based on the analysis results, this study 1) reflects the user's point of view in the maturity model of e-government, 2) considers access to various platforms according to the development of digital technology, 3) improves the e-government maturity model through data-based analysis such as user usage behavior suggested the need.